Gerber Octane Review (pic heavy)
-
Octane.


The Octane is a light/medium duty tool with their tried and true sliding plier head design. On board it carries a: Plier head, hard wire notch, bottle opener, CE OH knife blade, clamshell opener, flat head driver, and Phillips driver.
Thoughts:
Pliers: I am not a huge fan of the sliding plier design, because it makes it very difficult to get to the tools in the handles, and limits the tools you can fit. The plier head on mine is very loose, with a lot of side to side and vertical play. They lock fine but the wobble is something I just don’t like in my pliers. Hard wire notch is typical quality and handled coat hanger with not too much effort.

Bottle opener: This is a new take on multitool bottle openers. You open the pliers place the bottle opener around the cap and pull. This design works fairly well, and pretty easy to deploy due to the sliding pliers.

Knife: Knife is a modified sheepsfoot with a combo edge. The liner lock done on mine is horrible, and hopefully will be revamped in later designs and models. The liner travels to far on the tang, meaning as the tang wears with the lock, the knife will develop play, as there is no room for wear. The liner is also not very long; it is merely a tab that clicks into the handle, which doesn’t look very sturdy. Time will tell how it holds up.


Clamshell opener: This is probably one of the best innovations that have come along in multitools in quite some time. This one is a pull type opener, which is different from the Strata’s push type. I must say it works wonderfully. Mainly poke the tip in the clamshell and pull. It also makes a great box opener, grout ripper, fingernail cleaner and general poker/scraper. This is one of the best aspects of the tool.

Flat head driver: Pretty basic, works as intended.


Phillips driver: Finally a 3D driver from Gerber. Works great, decent length, and thick. It’s not slippery as long as the head is the right size, and I’m glad in the direction Gerber is going regarding the 3D Phillips driver.

Another thing I really like in this tool is the pocket clip. Its no secret that I don’t like the Skeletool pocket clip, but this one is nice. It’s a low riding clip with just the right amount of tension and fairly inconspicuous.
Overall: For a light duty tool or someone looking for something different from the Leatherman Juice and Skeletool range, this is a nice tool. The blade is a little off putting, due to the liner lock, but most of us carry a dedicated knife anyway. Will this replace your Wave or Spirit? Probably not, but for a lightweight EDC tool I think it’s worth a look.
*Note: A Leatherman Charge Ti was used in all pictures for size comparison only.
* -
For some reason the blade shape really speaks to me, very nice.
Thanks for the review and excellent pics. 
-
-
-
-
-
-
-
I was opening my Fuse Monarch 200 combo clamshell today (gave away the flashlight to a girl at work when I saw the type of battery it uses, kept the Fuse as work tool) and not wanting to ruin any of my blades used work scissors instead and think ruined them in the process

-
-
-
Nice review Zack and great pics as well

-
-
I think there's a lot more to this tool than first meets the eye. And its a big improvement over Gerber offerings of the last few years.
The tool itself is relatively small, yet the knife blade is comparitively long. And it operates smoothly one hand opening. And those screwdrivers, notice how long they are? Good job Gerber I'll say.

-
-
-
-
Spotted an Octane at Cabelas today, came here to look for a review, and BOOM, here it is. Well written, great pics & good info.
Makes me want to return and pick one up. Thanks.

-
-
I went back to Cabelas yesterday and grabbed the Octane. I am carrying it today in a Buck "debadged" nylon sheath that Cabelas also had. One thing cool about the sheath carry is when pulling out the Octane, the pliers are pulled out as well when removing the tool from the sheath. I like the knife blade design a lot, but not the blade stop so much as mentioned in the review.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login