<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Buck X-Tract]]></title><description><![CDATA[<p dir="auto">When I first saw pictures of the Buck X-Tract I thought it was a cool looking tool but wasn't sure how well it would be. Then when I found out it was selling for just around $30 on most knife and tool sites I thought I would take the risk and get one. If it turned out to be a crappy tool then at least I'll have a cool looking shelf tool.  I'm pleased to say that the tool isn't crap at all. The Knife is by far the best implement of the tool. A  3" long blade partially serrated drop point blade that's very sharp right out of the box.  The knife like all of the tools on the X-Tract is one hand opening and open with a thumb stud with ease.  There's about 1 1/2 of aggressive serrations at the base of the blade.</p>
<p dir="auto">The can/bottle opener is on the small side but does both jobs ok.  Like most can/bottle opener combos when using it to open a bottle it will cut the top of the bottle cap if pushed/pulled to hard. But it gets the bottle cap off.  The X-Tract has a metal lanyard loop on the bottom of the tool but I would have prefered a pocket clip insted.</p>
<p dir="auto">The X-Tract as two screw drivers, a #2 phillips and a 3/16 flathead that are deployed using your thumb on a interesting slide lock mechanism. While the sliding locks works ok I found that it will sometime slide open while trying to deploy the pliers on the other side of the tool.</p>
<p dir="auto">I like the way the pliers deploy. Using your thumb, you push the base of them on the tool and slide right out and lock into place. The pliers are the biggest disappointment for me.  While I haven't had any problems with them in use. They are on the small side. I would have to say that they not as strong has the pliers on the Leatherman Juice series.  I found myself being carefull when using them so not to break them.  Luckally the X-Tract is covered by Bucks 4-Ever warranty.  This being my first Buck knife I don't know how well their service department is .</p>
<p dir="auto">All in all I have to say that I am very pleased with the X-Tract. It has a very good sharp knife, all the tools can be taken out with one hand. But for me the #1 best thing about the X-Tract is the price, for $30 you get a good, quallity tool for your money.</p>
<p dir="auto">PROS:  Good sharp knife right out of the box<br />
           All the tools can be deployed with one hand<br />
           All tools lock<br />
           Price</p>
<p dir="auto">Cons:   The pliers are one the small and weak side<br />
           The can/bottle opener is small and alittle hard to take out<br />
            No pocket clip</p>
<p dir="auto">Overall length:  7 1/4 open<br />
                      4 1/4 closed</p>
<p dir="auto">Weight:    5.6 oz.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/300_xtract.jpg" alt="xtract.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/301_xtract1.jpg" alt="xtract1.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/302_xtract2.jpg" alt="xtract2.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/303_xtract5.jpg" alt="xtract5.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/topic/259/buck-x-tract</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 13:21:22 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/259.rss" rel="self" type="application/rss+xml"/><pubDate>Thu, 19 Oct 2006 01:13:49 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Buck X-Tract on Wed, 20 Dec 2006 19:57:39 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">What ever happened to Wal-Marts "Buy America" campagin?</p>
</blockquote>
<p dir="auto">"Welcome to Wal Mart!  Buy American!  Shop somewhere else!"</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/5663</link><guid isPermaLink="true">https://multitool.ninja/post/5663</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Wed, 20 Dec 2006 19:57:39 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Wed, 20 Dec 2006 15:54:05 GMT]]></title><description><![CDATA[<p dir="auto">Well, that's it...sometimes you've got to satisfy your urges.</p>
<p dir="auto">I'm just kinda hardheaded about buying from China....but who among us cannot buy somethings made in China....it sometimes seems like everything on the shelves at stores is "Made in China."  Wal-Mart must be the worst.  I saw a show on PBS a while back that stated that approximately 80% of Wal-Mart merchandise is made in China.</p>
<p dir="auto">What ever happened to Wal-Marts "Buy America" campagin?</p>
<p dir="auto"><strong>Anyway, I'm glad you like your Buck X-Tract.</strong><br />
:)</p>
]]></description><link>https://multitool.ninja/post/5656</link><guid isPermaLink="true">https://multitool.ninja/post/5656</guid><dc:creator><![CDATA[plowboy]]></dc:creator><pubDate>Wed, 20 Dec 2006 15:54:05 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Wed, 20 Dec 2006 05:20:34 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/plowboy" aria-label="Profile: plowboy">@<bdi>plowboy</bdi></a> <a href="/post/5605">said</a>:<br />
I don't mean anything nasty by this, but I try my best to not by stuff made in China.  I just  try not to.</p>
<p dir="auto">:)</p>
</blockquote>
<p dir="auto">Normally I do also.  I just absolutely loved the design of the X-tract and had to have it.</p>
]]></description><link>https://multitool.ninja/post/5642</link><guid isPermaLink="true">https://multitool.ninja/post/5642</guid><dc:creator><![CDATA[665ae]]></dc:creator><pubDate>Wed, 20 Dec 2006 05:20:34 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Tue, 19 Dec 2006 20:50:53 GMT]]></title><description><![CDATA[<p dir="auto">I don't mean anything nasty by this, but I try my best to not by stuff made in China.  I just  try not to.</p>
<p dir="auto">:)</p>
]]></description><link>https://multitool.ninja/post/5605</link><guid isPermaLink="true">https://multitool.ninja/post/5605</guid><dc:creator><![CDATA[plowboy]]></dc:creator><pubDate>Tue, 19 Dec 2006 20:50:53 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Tue, 21 Nov 2006 05:26:42 GMT]]></title><description><![CDATA[<p dir="auto">Yes, the X-tract is made in China.</p>
<p dir="auto">Still haven't heard anything about my X-tract.  I sent it in to get it repaired but nothing yet.  I'll post something when I get it back.</p>
]]></description><link>https://multitool.ninja/post/4242</link><guid isPermaLink="true">https://multitool.ninja/post/4242</guid><dc:creator><![CDATA[665ae]]></dc:creator><pubDate>Tue, 21 Nov 2006 05:26:42 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Tue, 21 Nov 2006 02:53:09 GMT]]></title><description><![CDATA[<p dir="auto">I've got a couple Buck "Whittaker" series multi-knives, and a Navigator. All were made in China, and it's obvious.  :(</p>
<p dir="auto">I don't know about the X-Tract though.</p>
]]></description><link>https://multitool.ninja/post/4230</link><guid isPermaLink="true">https://multitool.ninja/post/4230</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Tue, 21 Nov 2006 02:53:09 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Mon, 20 Nov 2006 20:12:51 GMT]]></title><description><![CDATA[<p dir="auto">I have recently been told that the X-Tract is Chinese made for Buck, can anyone confirm this? Might answer a few questions about this knife if they have not got all the checks on production right..</p>
<p dir="auto">Dave</p>
]]></description><link>https://multitool.ninja/post/4209</link><guid isPermaLink="true">https://multitool.ninja/post/4209</guid><dc:creator><![CDATA[damota]]></dc:creator><pubDate>Mon, 20 Nov 2006 20:12:51 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Mon, 30 Oct 2006 02:42:35 GMT]]></title><description><![CDATA[<p dir="auto">yeah, sounds like a heat treat wasn't done properly.Sometimes first production runs have problems like that</p>
]]></description><link>https://multitool.ninja/post/3291</link><guid isPermaLink="true">https://multitool.ninja/post/3291</guid><dc:creator><![CDATA[Fred]]></dc:creator><pubDate>Mon, 30 Oct 2006 02:42:35 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sun, 29 Oct 2006 12:15:52 GMT]]></title><description><![CDATA[<p dir="auto">Weird.  Sounds to me like it must have been a flaw in the metal for it to have broken like that...</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/3236</link><guid isPermaLink="true">https://multitool.ninja/post/3236</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Sun, 29 Oct 2006 12:15:52 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sun, 29 Oct 2006 04:39:56 GMT]]></title><description><![CDATA[<p dir="auto">I was cutting a 1/4" piece of thick rubber mat when I started to drift off my line.  I angled the knife blade to get the cut back straight and about 1/4" of the blade broke off at the tip.</p>
<p dir="auto">I don't know if it was the knife or me.  I do these types of cuts (even twisting the blade) with a Meyerco Paradox quite a bit.  The paradox has an AUS8 blade though, where the Buck has a 420HC blade.  (and by far, the Paradox blade is my favorite of all the multi's I have)</p>
]]></description><link>https://multitool.ninja/post/3227</link><guid isPermaLink="true">https://multitool.ninja/post/3227</guid><dc:creator><![CDATA[665ae]]></dc:creator><pubDate>Sun, 29 Oct 2006 04:39:56 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sun, 29 Oct 2006 02:46:29 GMT]]></title><description><![CDATA[<p dir="auto">How did it break?  Was it actually the blade or the lock or the pivot or what?  I think I speak for all of us when I say we need some details here...  like is this something that may happen to anyone or was it a one in a million kind of break?</p>
<p dir="auto">Enquiring minds want to know....</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/3226</link><guid isPermaLink="true">https://multitool.ninja/post/3226</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Sun, 29 Oct 2006 02:46:29 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sun, 29 Oct 2006 02:41:43 GMT]]></title><description><![CDATA[<p dir="auto">Hehe... yeah, expecially when you need to cut something...</p>
]]></description><link>https://multitool.ninja/post/3225</link><guid isPermaLink="true">https://multitool.ninja/post/3225</guid><dc:creator><![CDATA[665ae]]></dc:creator><pubDate>Sun, 29 Oct 2006 02:41:43 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sat, 28 Oct 2006 23:03:06 GMT]]></title><description><![CDATA[<p dir="auto">That could be considered a problem I suppose...</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/3220</link><guid isPermaLink="true">https://multitool.ninja/post/3220</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Sat, 28 Oct 2006 23:03:06 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sat, 28 Oct 2006 20:20:17 GMT]]></title><description><![CDATA[<p dir="auto">The knife blade broke.</p>
]]></description><link>https://multitool.ninja/post/3210</link><guid isPermaLink="true">https://multitool.ninja/post/3210</guid><dc:creator><![CDATA[665ae]]></dc:creator><pubDate>Sat, 28 Oct 2006 20:20:17 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sat, 28 Oct 2006 09:44:04 GMT]]></title><description><![CDATA[<p dir="auto">What was the problem you had?</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/3192</link><guid isPermaLink="true">https://multitool.ninja/post/3192</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Sat, 28 Oct 2006 09:44:04 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sat, 28 Oct 2006 04:29:52 GMT]]></title><description><![CDATA[<p dir="auto">I just sent mine off to get fixed... so hopefully I'll be back to carrying the X-tract in the next couple weeks.  I've heard nothing but good things about Bucks customer service, so I'm not too worried...</p>
]]></description><link>https://multitool.ninja/post/3183</link><guid isPermaLink="true">https://multitool.ninja/post/3183</guid><dc:creator><![CDATA[665ae]]></dc:creator><pubDate>Sat, 28 Oct 2006 04:29:52 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sat, 28 Oct 2006 00:00:39 GMT]]></title><description><![CDATA[<p dir="auto">Posted on the Main Site:</p>
<p dir="auto"><div class="card col-md-9 col-lg-6 position-relative link-preview p-0">

<div class="card-body">
<h5 class="card-title">
<a class="text-decoration-none" href="http://216.137.186.219/content/view/50/68/">
404 Not Found
</a>
</h5>
<p class="card-text line-clamp-3"></p>
</div>
<a href="http://216.137.186.219/content/view/50/68/" class="card-footer text-body-secondary small d-flex gap-2 align-items-center lh-2">



<img src="http://216.137.186.219/favicon.ico" alt="favicon" class="not-responsive overflow-hiddden" style="max-width: 21px; max-height: 21px;" onerror="this.remove()"/>



<p class="d-inline-block text-truncate mb-0"> <span class="text-secondary">(multitool.org)</span></p>
</a>
</div></p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/3172</link><guid isPermaLink="true">https://multitool.ninja/post/3172</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Sat, 28 Oct 2006 00:00:39 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sun, 22 Oct 2006 06:51:26 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/damota" aria-label="Profile: damota">@<bdi>damota</bdi></a> <a href="/post/2817">said</a>:<br />
Prime 77<br />
Are the jaws enough to just hold a hex head bolt steady to use a bigger tool to undo the bolt and the same question about the drivers?</p>
<p dir="auto">Dave</p>
</blockquote>
<p dir="auto">I really haven't tried to turn any big bolts with the pliers. They may be able to handle some hard work, but I would be careful.The screwdrivers both work good. I haven't had any problems with either of them</p>
]]></description><link>https://multitool.ninja/post/2833</link><guid isPermaLink="true">https://multitool.ninja/post/2833</guid><dc:creator><![CDATA[prime77]]></dc:creator><pubDate>Sun, 22 Oct 2006 06:51:26 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sun, 22 Oct 2006 06:47:42 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/j-sews" aria-label="Profile: J-sews">@<bdi>J-sews</bdi></a> <a href="/post/2780">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/grant-lamontagne" aria-label="Profile: Defender">@<bdi>Defender</bdi></a> <a href="/post/2776">said</a>:</p>
<blockquote>
<p dir="auto">Hmmm , it seems I have some catching up to do- I only got two new ones this week!  :P</p>
<p dir="auto">Def</p>
</blockquote>
<p dir="auto">Actually, you both have some catching up to do because we haven't seen enough new WOOOOOHOOOO postings from you two to account for seven new tools.</p>
<p dir="auto">So c'mon, get busy and tell us what all ya' got!</p>
</blockquote>
<p dir="auto">I'm just trying to catch up with you and Def on the tool and the post department. :)</p>
]]></description><link>https://multitool.ninja/post/2832</link><guid isPermaLink="true">https://multitool.ninja/post/2832</guid><dc:creator><![CDATA[prime77]]></dc:creator><pubDate>Sun, 22 Oct 2006 06:47:42 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sun, 22 Oct 2006 06:52:46 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/grant-lamontagne" aria-label="Profile: Defender">@<bdi>Defender</bdi></a> <a href="/post/2810">said</a>:<br />
I've already posted what I got... a Mini Tool and Wave...</p>
<p dir="auto">:P</p>
<p dir="auto">Def</p>
</blockquote>
<p dir="auto">I posted some of what I got....a Minitool, Crunch, X-tract, Wenger PocketGrip ( which is really cool by the way) and a LM Kick with the pocket clip on the way. I figured I could make me a poor mans SideClip because I'm always getting outbid on E-bay.</p>
]]></description><link>https://multitool.ninja/post/2831</link><guid isPermaLink="true">https://multitool.ninja/post/2831</guid><dc:creator><![CDATA[prime77]]></dc:creator><pubDate>Sun, 22 Oct 2006 06:52:46 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sat, 21 Oct 2006 21:31:34 GMT]]></title><description><![CDATA[<p dir="auto">Prime 77<br />
Are the jaws enough to just hold a hex head bolt steady to use a bigger tool to undo the bolt and the same question about the drivers?</p>
<p dir="auto">Dave</p>
]]></description><link>https://multitool.ninja/post/2817</link><guid isPermaLink="true">https://multitool.ninja/post/2817</guid><dc:creator><![CDATA[damota]]></dc:creator><pubDate>Sat, 21 Oct 2006 21:31:34 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sat, 21 Oct 2006 20:49:40 GMT]]></title><description><![CDATA[<p dir="auto">I've already posted what I got... a Mini Tool and Wave...</p>
<p dir="auto">:P</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/2810</link><guid isPermaLink="true">https://multitool.ninja/post/2810</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Sat, 21 Oct 2006 20:49:40 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sat, 21 Oct 2006 11:14:46 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/grant-lamontagne" aria-label="Profile: Defender">@<bdi>Defender</bdi></a> <a href="/post/2776">said</a>:<br />
Hmmm , it seems I have some catching up to do- I only got two new ones this week!  :P</p>
<p dir="auto">Def</p>
</blockquote>
<p dir="auto">Actually, you both have some catching up to do because we haven't seen enough new WOOOOOHOOOO postings from you two to account for seven new tools.</p>
<p dir="auto">So c'mon, get busy and tell us what all ya' got!</p>
]]></description><link>https://multitool.ninja/post/2780</link><guid isPermaLink="true">https://multitool.ninja/post/2780</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sat, 21 Oct 2006 11:14:46 GMT</pubDate></item><item><title><![CDATA[Reply to Buck X-Tract on Sat, 21 Oct 2006 10:11:52 GMT]]></title><description><![CDATA[<p dir="auto">Hmmm , it seems I have some catching up to do- I only got two new ones this week!  :P</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/2776</link><guid isPermaLink="true">https://multitool.ninja/post/2776</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Sat, 21 Oct 2006 10:11:52 GMT</pubDate></item></channel></rss>