<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Single-wing Wingman]]></title><description><![CDATA[<p dir="auto">I was pretty sure this had been done before by some of the modders here, as it's such a logical and straightforward way to finish up with by following the Mini-Surge mod. I am currently collecting bits for my own Mini-Surge mod, Wingman scissors being one of them.</p>
<p dir="auto">This left me with a scissor-less Wingman, and since I am OCD and cannot stand Wingman pliers I decided to create a 'mini-tool folder' in a single Wingman handle.</p>
<p dir="auto">What made this mod easier was the fact the top (pliers-end) and bottom (tools-end) pivot sizes on Wingman are the same size, allowing me to install the tools from a bottom of one handle into the top of the other, basically combining the Wingman's tool load into a single handle. To top it all off, I also added scissors from the Wave.</p>
<p dir="auto">The result was quite surprising to me as it required very little modding while creating almost a perfect small 'MT-folder' as an end result.</p>
<p dir="auto">The top tools fit snugly into the handle and the Wave scissors fold in perfectly. The only rule of thumb is to fold the bottom tools into the handle first, and top tools second, on top of the bottom tools. This is required as there's simply not enough space for the tools to fold independently inside the main handle cavity due to their length.</p>
<p dir="auto">Few details:</p>
<ul>
<li>I used a Wingman handle housing a 420HC combo blade</li>
<li>Bottom tools in that handle were left untouched</li>
<li>Internal pliers stop strip had to be removed by breaking a rivet, to allow the installation of the tools at the top of the handle. This is a must.</li>
<li>Phillips and flat head screwdrivers from the second handle were installed at the top of this handle</li>
<li>Wave scissors added and installed in a particular position (see photos below) over the bottle/can opener for correct fit</li>
<li>After extensive play with different sized washers and spacers (all sourced from Wingman's second handle) I ended up with this combo.</li>
<li>All button screw heads flattened. As much as I like button heads their prominent bulge was a little out of place for me personally on this tool, they are much bigger than the ones on Wave/Charge/Surge.</li>
</ul>
<p dir="auto"><img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_03_zps785930a6.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_04_zps42001fe2.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_05_zps2a677d1a.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_01_zps66b857fc.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_02_zpsf9fa6ed2.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_06_zps0d4b41e7.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_08_zpsba227bc7.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_07_zps674fc307.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_09_zpsc7e3738b.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_10_zps4652cd9a.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_11_zps81fdee5a.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_12_zpsc963cb62.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Hope you like it   :)</p>
]]></description><link>https://multitool.ninja/topic/56409/single-wing-wingman</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 19:21:15 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/56409.rss" rel="self" type="application/rss+xml"/><pubDate>Fri, 12 Dec 2014 20:16:48 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Single-wing Wingman on Thu, 23 Jan 2020 10:56:24 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/andrewbird" aria-label="Profile: AndrewBird">@<bdi>AndrewBird</bdi></a> <a href="/post/1077014">said</a>:<br />
So here's my version. I did it slightly different. In order to make the drivers "click" into place, I simply modified the handle to accept the stop clip thing that the bits fit into. This doesn't leave room for scissors, but since I don't have any anyway, it doesn't matter to me.</p>
<p dir="auto"><img src="https://db.tt/y1A6u80T" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://db.tt/1gEGjdpa" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://db.tt/NwGqApdu" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://db.tt/ROSKKLjH" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">You can see one of the slots I had to cut for the catch to fit in place. There is another on the other side.<br />
<img src="https://db.tt/3w1BjcMO" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Also had to cut a section out here for the spring part of the clip to move into.<br />
<img src="https://db.tt/ydSkIyF1" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://db.tt/KfE2X8tt" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I tried fitting the Wingman scissors in as well, and while I got them to fit, they didn't really work properly and made the tools on that end very difficult to open. They also wouldn't fit with the clip piece in like I finished it with. Overall I'm very happy with it though.</p>
</blockquote>
<p dir="auto">Sorry to unearth this thread, but I'm doing it for 2 reasons:<br />
1 - I'd really like to see the pictures in the quote (it seems they're not available anymore)<br />
2 - Since I'm very close to receiving a Surge for my backpack's toolbox, I want to give this mod a go!</p>
<p dir="auto">Enviado do meu Redmi Note 5 através do Tapatalk</p>
]]></description><link>https://multitool.ninja/post/2076512</link><guid isPermaLink="true">https://multitool.ninja/post/2076512</guid><dc:creator><![CDATA[FInixNOver]]></dc:creator><pubDate>Thu, 23 Jan 2020 10:56:24 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Wed, 10 May 2017 15:08:47 GMT]]></title><description><![CDATA[<p dir="auto">New page banana man dance</p>
<p dir="auto"><img src="/assets/uploads/smileys/nanadance.gif" alt=":nanadance:" title="nanadance" class="forum-smiley emoji" />        <img src="/assets/uploads/smileys/nanadance.gif" alt=":nanadance:" title="nanadance" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1475900</link><guid isPermaLink="true">https://multitool.ninja/post/1475900</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Wed, 10 May 2017 15:08:47 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Wed, 10 May 2017 15:08:00 GMT]]></title><description><![CDATA[<p dir="auto">Nice one Canine <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1475899</link><guid isPermaLink="true">https://multitool.ninja/post/1475899</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Wed, 10 May 2017 15:08:00 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Wed, 10 May 2017 08:10:46 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/zoidberg" aria-label="Profile: zoidberg">@<bdi>zoidberg</bdi></a> <a href="/post/1475507">said</a>:<br />
Nice one.   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />   Now you can join the special club.   /topic/51510</p>
</blockquote>
<p dir="auto">Cheers!  :D</p>
]]></description><link>https://multitool.ninja/post/1475638</link><guid isPermaLink="true">https://multitool.ninja/post/1475638</guid><dc:creator><![CDATA[caninesapien]]></dc:creator><pubDate>Wed, 10 May 2017 08:10:46 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Tue, 09 May 2017 22:14:16 GMT]]></title><description><![CDATA[<p dir="auto">Nice one.   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />   Now you can join the special club.   /topic/51510</p>
]]></description><link>https://multitool.ninja/post/1475507</link><guid isPermaLink="true">https://multitool.ninja/post/1475507</guid><dc:creator><![CDATA[zoidberg]]></dc:creator><pubDate>Tue, 09 May 2017 22:14:16 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Tue, 09 May 2017 21:58:44 GMT]]></title><description><![CDATA[<p dir="auto">Tried this myself earlier as a good beginner's mod. I'll get some Wave scissors for it but for now I dig it just as it is:</p>
<p dir="auto">Single Wingman/Little Wing</p>
<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20170509/853ad7f50d54ad54dfb4bba4508fdba7.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20170509/7d33c0f232bfd416250294c6726efa6a.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20170509/6fbeac703535b6c2d64f96f56fb30f2f.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1475496</link><guid isPermaLink="true">https://multitool.ninja/post/1475496</guid><dc:creator><![CDATA[caninesapien]]></dc:creator><pubDate>Tue, 09 May 2017 21:58:44 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Tue, 09 May 2017 11:57:57 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/zoidberg" aria-label="Profile: zoidberg">@<bdi>zoidberg</bdi></a> <a href="/post/1474991">said</a>:<br />
I believe he meant remove the rivet and the spring piece however it can be left in if you reshape the tools.<br />
There is at least one example of it in the thread.<br />
For a first mod, yeah sure go for it.</p>
</blockquote>
<p dir="auto">Great, thank you. I didn't see it in the thread but I'll look back through. Cheers!  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1475067</link><guid isPermaLink="true">https://multitool.ninja/post/1475067</guid><dc:creator><![CDATA[caninesapien]]></dc:creator><pubDate>Tue, 09 May 2017 11:57:57 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Tue, 09 May 2017 11:19:24 GMT]]></title><description><![CDATA[<p dir="auto">I believe he meant remove the rivet and the spring piece however it can be left in if you reshape the tools.<br />
There is at least one example of it in the thread.<br />
For a first mod, yeah sure go for it.</p>
]]></description><link>https://multitool.ninja/post/1474991</link><guid isPermaLink="true">https://multitool.ninja/post/1474991</guid><dc:creator><![CDATA[zoidberg]]></dc:creator><pubDate>Tue, 09 May 2017 11:19:24 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Tue, 09 May 2017 10:49:35 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/babola" aria-label="Profile: babola">@<bdi>babola</bdi></a> <a href="/post/1006212">said</a>:</p>
<ul>
<li>Internal pliers stop strip had to be removed by breaking a rivet, to allow the installation of the tools at the top of the handle. This is a must.</li>
</ul>
</blockquote>
<p dir="auto">This mod is absolutely fantastic! Just wanted to check - the stop strip for the pliers... is that not attached to the main body of the handle? Or did you just mean the strip's rivet had to be removed in order to fit the other tools?</p>
<p dir="auto">Do you think this is a good first mod attempt for someone* to try?</p>
<p dir="auto">*me</p>
]]></description><link>https://multitool.ninja/post/1474973</link><guid isPermaLink="true">https://multitool.ninja/post/1474973</guid><dc:creator><![CDATA[caninesapien]]></dc:creator><pubDate>Tue, 09 May 2017 10:49:35 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Mon, 09 Jan 2017 04:22:41 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/jdindadell" aria-label="Profile: jdindadell">@<bdi>jdindadell</bdi></a> <a href="/post/1131662">said</a>:<br />
Working on doing the same mod with a rev.  Removed the pliers and put the flat and philips drivers in.  They miss the handle spring area by a rch, so I am planning on making a thin forked spacer to fill the gap and provide a notch to engage the slot in the tools.  Will post pics when I get the spader made.</p>
<p dir="auto">Also has anyone done this with a wave?  Link if possible please!</p>
</blockquote>
<p dir="auto">This is awesome - but I agree it would be awesome if anyone tries this with a wave.  Would love to see pics.</p>
]]></description><link>https://multitool.ninja/post/1409427</link><guid isPermaLink="true">https://multitool.ninja/post/1409427</guid><dc:creator><![CDATA[SirAri]]></dc:creator><pubDate>Mon, 09 Jan 2017 04:22:41 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Mon, 12 Oct 2015 01:53:03 GMT]]></title><description><![CDATA[<p dir="auto">Finally got a Wingman and Wave at the right price for the Single-Wingman and Mini-Surge mods. Made my Single-Wingman today and plan on using the Wingman Scissors for the Mini-Surge which is what I really need. This was a nice little by product. Love it, but I am afraid will not get much use because lack of pliers.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/246256_LMWingMod1.JPG" alt="LMWingMod1.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/246258_LMWingMod2.JPG" alt="LMWingMod2.JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1163970</link><guid isPermaLink="true">https://multitool.ninja/post/1163970</guid><dc:creator><![CDATA[rishardh]]></dc:creator><pubDate>Mon, 12 Oct 2015 01:53:03 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Sat, 01 Aug 2015 04:06:51 GMT]]></title><description><![CDATA[<p dir="auto">Working on doing the same mod with a rev.  Removed the pliers and put the flat and philips drivers in.  They miss the handle spring area by a rch, so I am planning on making a thin forked spacer to fill the gap and provide a notch to engage the slot in the tools.  Will post pics when I get the spader made.</p>
<p dir="auto">Also has anyone done this with a wave?  Link if possible please!</p>
]]></description><link>https://multitool.ninja/post/1131662</link><guid isPermaLink="true">https://multitool.ninja/post/1131662</guid><dc:creator><![CDATA[jdindadell]]></dc:creator><pubDate>Sat, 01 Aug 2015 04:06:51 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Mon, 27 Jul 2015 17:31:11 GMT]]></title><description><![CDATA[<p dir="auto">OK, at the top of the page click Profile then Awards then Show Available Awards.  Look for the Hacker Award.  Read and digest.  There is info about how to apply somewhere.  Easy when you find it.</p>
<p dir="auto">This link may or may not work...</p>
<p dir="auto"><a href="http://forum.multitool.org/index.php?action=profile;area=listAwards;start=20" rel="nofollow ugc">http://forum.multitool.org/index.php?action=profile;area=listAwards;start=20</a></p>
]]></description><link>https://multitool.ninja/post/1129293</link><guid isPermaLink="true">https://multitool.ninja/post/1129293</guid><dc:creator><![CDATA[pingu]]></dc:creator><pubDate>Mon, 27 Jul 2015 17:31:11 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Mon, 27 Jul 2015 17:21:09 GMT]]></title><description><![CDATA[<p dir="auto">[/quote]Great write-up.  You do know about the Hacker badge?<br />
[/quote]</p>
<p dir="auto">Aaaaah..........What's a hacker badge? ???</p>
]]></description><link>https://multitool.ninja/post/1129287</link><guid isPermaLink="true">https://multitool.ninja/post/1129287</guid><dc:creator><![CDATA[Dean51]]></dc:creator><pubDate>Mon, 27 Jul 2015 17:21:09 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Mon, 27 Jul 2015 16:22:38 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/dean51" aria-label="Profile: Dean51">@<bdi>Dean51</bdi></a> <a href="/post/1129229">said</a>:<br />
I bought the Wingman to replace a Sideclip that was lost. I never really warmed up to the Wingman.<br />
So what to do. You read some post on MTO and take your tool apart. Makes perfect sense right?<br />
Not having mills or surface grinders, not to mention the skills of some here. I had to come up with a way to pull off this mod, that I could do it in my garage.<br />
I tried it with one end not clicking into place and even though it worked I kept thing there must be a way to make both ends of the tool snap into place.</p>
</blockquote>
<p dir="auto">Great write-up.  You do know about the Hacker badge?</p>
]]></description><link>https://multitool.ninja/post/1129258</link><guid isPermaLink="true">https://multitool.ninja/post/1129258</guid><dc:creator><![CDATA[pingu]]></dc:creator><pubDate>Mon, 27 Jul 2015 16:22:38 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Mon, 27 Jul 2015 15:41:55 GMT]]></title><description><![CDATA[<p dir="auto">I bought the Wingman to replace a Sideclip that was lost. I never really warmed up to the Wingman.<br />
So what to do. You read some post on MTO and take your tool apart. Makes perfect sense right?<br />
Not having mills or surface grinders, not to mention the skills of some here. I had to come up with a way to pull off this mod, that I could do it in my garage.<br />
I tried it with one end not clicking into place and even though it worked I kept thing there must be a way to make both ends of the tool snap into place.<br />
.<br />
So I decided to rivet the spring from one handle to the blade side handle.<br />
First step is to drill out the rivet for the pliars head spring.<br />
Next step is to cut out a clearance on the bottom for the spring.<br />
Then you have to grind the retaining lugs off the spring. So it will fit into the handle.<br />
Then install the spring with one of the hinge screws. Don't take the hinge screw out until you are done.<br />
This will hold it in place when you drill the hole for the 3/32nd SS rod. I used stock from a knife supply that's sold for slip joints. Leave the hinge screw in place while you are peening the rod, so it will stay in position. If it moves now you are in trouble.</p>
<p dir="auto">I used a punch and doomed the end so I could peen the rod inside the handle. Then clamped the punch in a vice so it would back up the rod. Then worked the other end with a small ball peen.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/198842_Single%20wing%201.jpg" alt="Single wing 1.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/198844_Single%20wing%202.jpg" alt="Single wing 2.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/198846_Single%20wing%203.jpg" alt="Single wing 3.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/198848_Single%20wing%204.jpg" alt="Single wing 4.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1129229</link><guid isPermaLink="true">https://multitool.ninja/post/1129229</guid><dc:creator><![CDATA[Dean51]]></dc:creator><pubDate>Mon, 27 Jul 2015 15:41:55 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Sat, 25 Jul 2015 23:27:59 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/babola" aria-label="Profile: babola">@<bdi>babola</bdi></a> <a href="/post/1006212">said</a>:<br />
I was pretty sure this had been done before by some of the modders here, as it's such a logical and straightforward way to finish up with by following the Mini-Surge mod. I am currently collecting bits for my own Mini-Surge mod, Wingman scissors being one of them.</p>
<p dir="auto">This left me with a scissor-less Wingman, and since I am OCD and cannot stand Wingman pliers I decided to create a 'mini-tool folder' in a single Wingman handle.</p>
<p dir="auto">What made this mod easier was the fact the top (pliers-end) and bottom (tools-end) pivot sizes on Wingman are the same size, allowing me to install the tools from a bottom of one handle into the top of the other, basically combining the Wingman's tool load into a single handle. To top it all off, I also added scissors from the Wave.</p>
<p dir="auto">The result was quite surprising to me as it required very little modding while creating almost a perfect small 'MT-folder' as an end result.</p>
<p dir="auto">The top tools fit snugly into the handle and the Wave scissors fold in perfectly. The only rule of thumb is to fold the bottom tools into the handle first, and top tools second, on top of the bottom tools. This is required as there's simply not enough space for the tools to fold independently inside the main handle cavity due to their length.</p>
<p dir="auto">Few details:</p>
<ul>
<li>I used a Wingman handle housing a 420HC combo blade</li>
<li>Bottom tools in that handle were left untouched</li>
<li>Internal pliers stop strip had to be removed by breaking a rivet, to allow the installation of the tools at the top of the handle. This is a must.</li>
<li>Phillips and flat head screwdrivers from the second handle were installed at the top of this handle</li>
<li>Wave scissors added and installed in a particular position (see photos below) over the bottle/can opener for correct fit</li>
<li>After extensive play with different sized washers and spacers (all sourced from Wingman's second handle) I ended up with this combo.</li>
<li>All button screw heads flattened. As much as I like button heads their prominent bulge was a little out of place for me personally on this tool, they are much bigger than the ones on Wave/Charge/Surge.</li>
</ul>
<p dir="auto"><img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_03_zps785930a6.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_04_zps42001fe2.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_05_zps2a677d1a.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_01_zps66b857fc.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_02_zpsf9fa6ed2.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_06_zps0d4b41e7.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_08_zpsba227bc7.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_07_zps674fc307.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_09_zpsc7e3738b.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_10_zps4652cd9a.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_11_zps81fdee5a.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i20.photobucket.com/albums/b241/babola/Wingman_in_a_handle_12_zpsc963cb62.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Hope you like it   :)</p>
</blockquote>
<p dir="auto">Awesome! [emoji482][emoji106]</p>
]]></description><link>https://multitool.ninja/post/1128474</link><guid isPermaLink="true">https://multitool.ninja/post/1128474</guid><dc:creator><![CDATA[in_sympathy]]></dc:creator><pubDate>Sat, 25 Jul 2015 23:27:59 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Fri, 24 Jul 2015 17:22:15 GMT]]></title><description><![CDATA[<p dir="auto">Making a YouTube video "Simple Leatherman Wingman Modifications" showing step by step how to do it will be very helpful, I'm sure it will have a lot of hits and thumbs up. Who knows, but you might get a call from LM  ;)</p>
]]></description><link>https://multitool.ninja/post/1127723</link><guid isPermaLink="true">https://multitool.ninja/post/1127723</guid><dc:creator><![CDATA[JustinCase]]></dc:creator><pubDate>Fri, 24 Jul 2015 17:22:15 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Fri, 24 Jul 2015 13:50:40 GMT]]></title><description><![CDATA[<p dir="auto">Sorry, not read the whole thread, but curious if you used the other handle (with scissors) you could make it TSA compliant.<br />
It wouldnt have a blade, but still have a lot of great tools in a small package</p>
]]></description><link>https://multitool.ninja/post/1127627</link><guid isPermaLink="true">https://multitool.ninja/post/1127627</guid><dc:creator><![CDATA[Its Hard To Know]]></dc:creator><pubDate>Fri, 24 Jul 2015 13:50:40 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Wed, 22 Jul 2015 05:00:39 GMT]]></title><description><![CDATA[<p dir="auto">babola, I hope you do not mind, but I stole your pics and link to show someone on another forum.</p>
]]></description><link>https://multitool.ninja/post/1126111</link><guid isPermaLink="true">https://multitool.ninja/post/1126111</guid><dc:creator><![CDATA[captain spaulding]]></dc:creator><pubDate>Wed, 22 Jul 2015 05:00:39 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Wed, 29 Apr 2015 21:02:59 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/kampfer" aria-label="Profile: Kampfer">@<bdi>Kampfer</bdi></a> <a href="/post/1066289">said</a>:<br />
This thing is so easy, took less than two minutes to take apart and put back together.</p>
<p dir="auto">I tried putting the drivers on the other end of handle in place of pliers, they fit in but don not click, their locking lugs could not reach the handle. It would be good if the drivers can directly drop in take place of pliers, average user can easily transform the tool to "Pocket knife" or "Pocket pliers" modes, sadly that is not the case.</p>
<p dir="auto">I tried putting Rev's pliers on SK, but they don't fit either.</p>
</blockquote>
]]></description><link>https://multitool.ninja/post/1080688</link><guid isPermaLink="true">https://multitool.ninja/post/1080688</guid><dc:creator><![CDATA[Kampfer]]></dc:creator><pubDate>Wed, 29 Apr 2015 21:02:59 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Wed, 29 Apr 2015 20:57:24 GMT]]></title><description><![CDATA[<p dir="auto">Huh.</p>
<p dir="auto">What went wrong?</p>
]]></description><link>https://multitool.ninja/post/1080685</link><guid isPermaLink="true">https://multitool.ninja/post/1080685</guid><dc:creator><![CDATA[Lynn LeFey]]></dc:creator><pubDate>Wed, 29 Apr 2015 20:57:24 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Wed, 29 Apr 2015 18:09:34 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Lynn LeFey <a href="/post/1080592">said</a>:<br />
Is the plier pivot on the Rev the same size as the Wingman/Sidekick? If so, I think it'd save a step to use the Rev instead for this mod, since you wouldn't have to drill out the rivet holding the retention spring of the Wingman/Sidekick plier.</p>
<p dir="auto">At least... I think I have that right.</p>
<p dir="auto">I pulled my mod out today and was fiddling with it. And still think it's a pretty cool idea. The pocket clip is just really useful for a knife this size, IMO.</p>
</blockquote>
<p dir="auto">I treid do that with rev, did not work.</p>
]]></description><link>https://multitool.ninja/post/1080622</link><guid isPermaLink="true">https://multitool.ninja/post/1080622</guid><dc:creator><![CDATA[Kampfer]]></dc:creator><pubDate>Wed, 29 Apr 2015 18:09:34 GMT</pubDate></item><item><title><![CDATA[Reply to Single-wing Wingman on Wed, 29 Apr 2015 17:18:02 GMT]]></title><description><![CDATA[<p dir="auto">Is the plier pivot on the Rev the same size as the Wingman/Sidekick? If so, I think it'd save a step to use the Rev instead for this mod, since you wouldn't have to drill out the rivet holding the retention spring of the Wingman/Sidekick plier.</p>
<p dir="auto">At least... I think I have that right.</p>
<p dir="auto">I pulled my mod out today and was fiddling with it. And still think it's a pretty cool idea. The pocket clip is just really useful for a knife this size, IMO.</p>
]]></description><link>https://multitool.ninja/post/1080592</link><guid isPermaLink="true">https://multitool.ninja/post/1080592</guid><dc:creator><![CDATA[Lynn LeFey]]></dc:creator><pubDate>Wed, 29 Apr 2015 17:18:02 GMT</pubDate></item></channel></rss>