Core blimey Govner
-
I've always been a fan of the original Leatherman Supertool and thanks to Def I have the chance to use and review Leathermans current large classic design multitool the Core. One thing that soon became clear was the Core is a no frills multitool , you wont find any fancy bit holders , changeable blades or one handed opening on this model, neither will you find any S30V or Titanium on it .
So what do you get for your hard earned money then? Well first off it’s a big tool weighing in at 10.8oz / 307g and 4.5 inches / 11.5cm long by 13/16th inch / 21mm wide so it may not be for you if you have small hands or like pocket carry, it really needs to go on a belt or in a bag.On with the features then and first up is the
PLIERS
They are one beefy set of pliers and certainly seem up to the job with good needle nose and a huge wire cutting area that quite frankly leaves the Victorinox Swisstool trailing behind .There is also a stranded wire cutter located behind the plier jaws and in front of the electrical crimper. One thing I noticed was the wire cutters bind slightly when closing the plier jaws , I don’t think this is a defect as there is no burr or dent on the edge , I just think its because its tight with Zero play . The upside being it can cut very thin wire and even paper.


Next is the handles.
This tool is about as big as you can go while still maintaining comfort and at 21mm wide it’s quite a handful. This is made bearable by the rounded edges and also the use of Zytel in the tool makes it very kind on the hands when using the screwdrivers etc. Perhaps SOG could do with using a little Zytel around their gears.

Lock Release
What can I say about these? I found them very easy to use and very positive feel to them and much better then previous locks found on large Leathermans.
Ruler
There is a ruler in inches and cm that reads upto 9inchs / 229mm. It works ok but due to the rounded edges of the handles it’s not as effective as the Swisstool when putting it up against something. Although it’s an awful lot better then say a Gerber 600.
Now lets have a look at what’s inside the handles and we’ll start with the
Screwdrivers
There are three flat head drivers to choose from, all of which are hollow ground. I don’t know how much difference the grind makes but I have used them a few times and can’t fault them.


Phillips Driver
I must say I was very impressed with this. Nice long reach and it didn’t slip either. I especially liked the thumb rest although of little significance when turning the tool to drive in a screw it comes into its own when starting a screw or tightening one.


Lanyard
There is a lanyard ring located inside the handle and is easy to access .

Can Opener / Cap Lifter
This worked fine when I tested it on some cans of tuna (for some reason I have a few spare). The thing with LM can openers is you pull them around the can rather then push like a Victorinox one and is just as effective. I enjoyed testing the cap lifter, maybe a little too much. This also worked fine but for some reason it wouldn’t open Becks beer bottles but this may be down to operator error due to all the other bottles I opened previously.


Awl
I found it a little too wide but it was usable with a nice sharp edge.

File
The metal saw worked very well as did both sides of the file but I thought the actual quality was lacking. First of all the tip looked like someone had used their teeth to cut it to size plus near the tang on one side the grooves were very faint.




Blades
I liked both the blades on the Core. They are nice and long with the Clip point plain edge blade being very slightly hollow ground .The serrated blade cut through rope with ease and although not blunt tipped it doesn’t curve upwards to a point so could be used for first aid / rescue .Both could be sharpened easily on a Spyderco Sharpmaker with hair shaving results .



Wood Saw
No complaints here, can’t find fault with it at all.


Conclusion
Well what a pleasant surprise this turned out to be. This really is a very capable multitool. I would go as far to say this is the best Leatherman I have seen to date. All the old problems seem to have been sorted out .It has no frills or gimmicks just a good range of tools that’s packaged in a classic multitool design.
Will it replace my Swisstool as EDC? Sometimes. I really am that impressed. I will certainly be taking a closer look at the Fuse and Blast in the future. -
nice review dude,i like tohose"in action"pics.
with surge u cant go wrong,i learned it some time ago but still i was a total clown,a stupid a-- jerk to sell it when i was broke.im gettin a new for sure.
-
Bloody fine review and picture's sir

I agree with you whole heartedly in saying it's the best of the LM range

-
-
-
Wow - praise indeed from a sworn Vic loyalist!
Great review Dunc, and I have to say I agree with everything you say, good and bad. This would be my EDC but for the size. It is the first tool I reach for though when I'm doing anything around the house or garden. With the removable bit driver, I usually don't need anything else.
You mentioned the Fuse and Blast. They really are the "little brothers" to the Core, so I'm sure you would appreciate them too!
-
Thanks for the review, Dunc!

I was looking at a Core the other day, and t is a very rugged looking tool.
Another huge selling point for me is that the Core has the longest and straightest philips head of any mainstream multitool.
It's a real shame about the file though.
I'd also prefer outside-opening tools, though I am starting to get used to inside-opening after using my Kick for a while. It's not as big a deal as I had imagined...
-
That's a hot review. I like the usage pictures!
Shame about the file, must be one of those Friday afternoon parts.
-
Excellent review, Dunc! It was well worth the wait!
I was just looking at my two Core's and my files aren't anything like the one on that Core... Anyways, I am glad you like the Core! It is IMO the best "working" multitool, everything works SO well! I still can't find any faults with mine... -
Thanks for the great review, but I don't know what to think. First Leatherman123 starts using a Swisstool and now you're using a Core. My world is shaken and I'm left in a daze. :ahhh
It's reassuring to see brand loyal members have an open mind about multitools other than their favorites.
-
Well, the SURGE still reigns supreme in my book. But, I really do like the SwissTools! I really like the belt cutter on the RS. But, I prefer the Std...
-
-
Rub it in! I am going to buy one real soon!
-
@Leatherman123 said:
Rub it in! I am going to buy one real soon!I'm just messing with you.

I know what it's like to want them all. The way I see it we are both in the same boat.
Have you seen any BO Swisstools? They seem to have a nicer/smoother finish than BO Leatherman tools. I assume it's because the Swisstools are more highly polished before the BO is applied, but Victorinox might use a completely different process. I really don't know.
-
I used to have one. It had Land Rover on the handles... I think I may have to buy one when I get back from camping..
-
@Hoghead said:
Thanks for the great review, but I don't know what to think. First Leatherman123 starts using a Swisstool and now you're using a Core. My world is shaken and I'm left in a daze. :ahhhIt's reassuring to see brand loyal members have an open mind about multitools other than their favorites.
I am with you bro , what next Hawkchucker EDCing a Suspension :ahhh :ahhh . Great review Dunc

-
Thanks for the great review, but I don't know what to think. First Leatherman123 starts using a Swisstool and now you're using a Core. My world is shaken and I'm left in a daze. :ahhh
It's reassuring to see brand loyal members have an open mind about multitools other than their favorites.
I am with you bro , what next Hawkchucker EDCing a Suspension :ahhh :ahhh . Great review Dunc

I don't think he would EDC that thing unless we paid him by the hour with Leatherman, Swisstool and SOG. Meaning he got a good multitool for every hour he had to live with the Suspension.

-
-
@Leatherman123 said:
Excellent review, Dunc! It was well worth the wait!
I was just looking at my two Core's and my files aren't anything like the one on that Core... Anyways, I am glad you like the Core! It is IMO the best "working" multitool, everything works SO well! I still can't find any faults with mine...My file look's the same, the finish is pretty poor

-
Mike does yours have the faint grooves on one side near the tang as well ? Could be a hole batch like that , wha up the date on the inside of the handles on yours ? Mine is 0905 dunc
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login