Amefa Corner!
-
They can be a little mysterious, maybe shunned, but these Amefa-made Dutch Army Knives need love too!
This thread is part-info and part-photo-goodness, like the Wenger SI thread!

(Of course, knowing ya'll, it will probably be derailed.
)
I will post links later to other Amefa threads, for info and reference purposes.
For now,
!Copy-pasted post from another thread for (again) reference purposes:
Spoiler:
@Pablo O'Brien said:
How's the build quality on the Amefa? Can it be compared to Vics? Can you compare it to something?
First and foremost:
I have no alox to compare it to, the best I have is recent celidor. There have been threads with alox comparisons though.
Mine is the '72(?)-'74 pattern, with a bottle opener opposite the awl, a straight blade in its own layer and no can opener. Some would carry it just because of the unusual toolset.

In terms of robustness and strength, I think its equal to Vic.
Fit and finish? Not so good.The scales appear to have the same texture as Vic alox.(But they might be thicker? Can anyone compare to a modern Alox and '70s soldier?)
The rivets stick out a little on the backside, though I don't notice it usually.The Awl is Good. It is the only polished tool, and I would say its almost exactly like the Vic awl.

I think the Bottle opener is the thick beefy version(thicker than modern alox) also present in Vic soldiers of the same era**(Can anyone check?)**, and has the scraper.

(Though it tapers at the point slightly thinner than a modern celidor, can anyone compare to a '70s soldier?)
The Vic soldier bottle opener from same era is also unpolished, I hear.The Bail is Good.

That leaves the blade. It appears to start tapering around 2/3 up*, like a Wenger SI(So I hear) so its stout. But it has less belly(?). Its also unpolished.
On mine, the springs are strong, but not too much. Some apparently have weak or nailbreaker springs.
The awl spring is also misaligned with the scales when the awl is closed, right where it sits*.
The bottle opener has a slight wiggle that comes and goes in the fully open position, but thats just mine I think.
The Nickle-Brass liner is dull, but you know, its old and used!*Probably only applies to the 72(?)-74 Amefa pattern
Whew.

Thats my day post word count quota done.
Can anyone answer my bolded questions? Thank you!
-
-
@Pablo O'Brien said:
KL74... From 1972(?) to 1974, Amefa made this curious pattern for the dutch army.
Main blade in one layer, Awl and Bottle opener in another layer.
Why did the dutch army not want the can opener? The answer will probably be never known.

First, I am 75% Dutch.
Second, having a can opener in Dutch army recruit hands, may just have made it a complicated tool. As configured it is still a simple tool. [emoji108]Sent from my iPhone using Tapatalk
-
Awesome - I've never seen that can-openerless SAK before!
But you're right - you'd think soldiers would need a can opener more than most people. Mysterious! -
Way to go Pablo....I want one!!
-
-
i got one years ago. at first i wasn't sure if it was a kerambit or a can opener
Sent from my iPhone using Tapatalk
-
-
-
-
-
-
-
-
I'm after a Amefa at the moment, doe anyone have any information on these knives?
They issued Victorinox Soldiers in 1983-1992, with the exception of 1984.
Before that they Issued Amefa. But I can't find any information about the timeframe.Is there somewhere I can find more info on this?
-
-
@Mactire404 said:
I'm after a Amefa at the moment, doe anyone have any information on these knives?
They issued Victorinox Soldiers in 1983-1992, with the exception of 1984.
Before that they Issued Amefa. But I can't find any information about the timeframe.Is there somewhere I can find more info on this?
There have been other threads talking about amefa, and I do know that Amefa made DAKs from at least the 1960's to when victorinox took over.
There was a DAK design in the 1960's, another for a few years around 1974(See picture) and then they used the Victorinox Soldier design after that.
So at least 3 different designs/patterns@Pablo O'Brien said:
Bump. I need to see more pictures...

(Could a mod rename the thread please? "Amefa Corner!". Thank you!
)As you wish P O'B

Thank you!



-
I might be able to get my hands on a '84 Amefa.
Can anyone give me an indication on price on these SAKs? -
Lowtech sold a pretty used one for 30β¬:
</topic/51209
Reinier sold a bunch once, including a 1970 brown scaled design:
</post/475552>Few more links:
Amefa DAK?
Are AMEFA (KL marked) Dutch Army 93mm Knives comparable to Vic soldiers?
Big thread:
Dutch Army Knives -
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better π
Register Login






