<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[The Gerber MP1 Thread]]></title><description><![CDATA[<p dir="auto">So I'm just going to go ahead and start a thread for all things MP1.  I've been posting a few pics of the one I just got and figured a dedicated thread was in order.</p>
<p dir="auto">Today was my first day carrying it to work.  I'm giving my trusty ST300 a vacation for a week to see how the MP1 fairs at my job.  It did pretty good today.</p>
<p dir="auto">The pliers stood up to some moderate twisting.<br />
<img src="http://i.imgur.com/UaYoD1D.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">They also popped some staples out with ease.<br />
<img src="http://i.imgur.com/0JtFeXa.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Did fine stripping low voltage wire.<br />
<img src="http://i.imgur.com/iPhgsy2.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I usually pair a Spyderco with my ST300 for an easy access blade but the one hand blade on the MP1 allowed me to leave the Spydie at home too.  It performed well and although I can appreciate this blade shape from a durability standpoint, I find myself wishing it had a bit more of a point.<br />
<img src="http://i.imgur.com/oZ1Z0T9.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I also got to use the long driver a bit.  Before actually getting this tool I was a little suspect of this implement and wondered how durable it could possibly be.  Well I didnt really push it today but I was able to tighten these screws up nice and snug and I didn't feel any flex or twisting that made me nervous.<br />
<img src="http://i.imgur.com/rqP1TX1.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i.imgur.com/lLQEWea.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I do like how the pliers have a side cutter.  Makes it easier to cut zipties off cleanly.</p>
<p dir="auto">The G10 handles are nice and grippy but I've decided that I prefer non-sprung pliers.  The jaws on the MP1 open up nice and wide but the spring makes the tool take up a lot of real estate when you set it down on top of a ladder.</p>
<p dir="auto">The sheath seems pretty durable but I hate Velcro and wish it had a snap instead.   I also wish it had a spot to tuck my trusty Olight AAA.  I was forced to pocket carry it today.</p>
<p dir="auto">All in all I was happy with the MP1's performance today.  I'll try to share some more as the week goes on.</p>
<p dir="auto">I hope some other MP1 owners (all variants) will jump in here as well.   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/topic/74427/the-gerber-mp1-thread</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 16:23:18 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/74427.rss" rel="self" type="application/rss+xml"/><pubDate>Tue, 31 Oct 2017 01:13:04 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to The Gerber MP1 Thread on Mon, 07 Sep 2020 17:12:35 GMT]]></title><description><![CDATA[<p dir="auto">That is a good looking tool for sure <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2159710</link><guid isPermaLink="true">https://multitool.ninja/post/2159710</guid><dc:creator><![CDATA[SirVicaLot]]></dc:creator><pubDate>Mon, 07 Sep 2020 17:12:35 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Mon, 07 Sep 2020 15:18:25 GMT]]></title><description><![CDATA[<p dir="auto">Still liking the MP-1.</p>
<p dir="auto">Using a lot and no issues.<img src="https://uploads.tapatalk-cdn.com/20200907/fdb4e303c1d6fbafcaa71d3b9fdf06f8.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Enviado de meu moto g(6) usando o Tapatalk</p>
]]></description><link>https://multitool.ninja/post/2159680</link><guid isPermaLink="true">https://multitool.ninja/post/2159680</guid><dc:creator><![CDATA[Hevy (CT-782)]]></dc:creator><pubDate>Mon, 07 Sep 2020 15:18:25 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Tue, 11 Feb 2020 17:39:27 GMT]]></title><description><![CDATA[<p dir="auto">Oh boy - so am I - better than apple pie!  <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2086676</link><guid isPermaLink="true">https://multitool.ninja/post/2086676</guid><dc:creator><![CDATA[Rapidray]]></dc:creator><pubDate>Tue, 11 Feb 2020 17:39:27 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Tue, 11 Feb 2020 15:00:47 GMT]]></title><description><![CDATA[<p dir="auto">I'm fan of G-10 look Ray!</p>
<p dir="auto">Enviado de meu moto g(6) usando o Tapatalk</p>
]]></description><link>https://multitool.ninja/post/2086627</link><guid isPermaLink="true">https://multitool.ninja/post/2086627</guid><dc:creator><![CDATA[Hevy (CT-782)]]></dc:creator><pubDate>Tue, 11 Feb 2020 15:00:47 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Tue, 11 Feb 2020 13:22:27 GMT]]></title><description><![CDATA[<p dir="auto">I do like the G-10 scales  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2086597</link><guid isPermaLink="true">https://multitool.ninja/post/2086597</guid><dc:creator><![CDATA[Rapidray]]></dc:creator><pubDate>Tue, 11 Feb 2020 13:22:27 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Tue, 11 Feb 2020 13:01:57 GMT]]></title><description><![CDATA[<p dir="auto">Ranger in action to reprofile some edges<img src="https://uploads.tapatalk-cdn.com/20200211/f4d09f914b9fe20bf3ded0f29ffd5ea9.jpg" alt="" class="img-markdown  img-fluid" /><img src="https://uploads.tapatalk-cdn.com/20200211/4bbfa4ac19006f1e030818c769d8e70d.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Enviado de meu moto g(6) usando o Tapatalk</p>
]]></description><link>https://multitool.ninja/post/2086567</link><guid isPermaLink="true">https://multitool.ninja/post/2086567</guid><dc:creator><![CDATA[Hevy (CT-782)]]></dc:creator><pubDate>Tue, 11 Feb 2020 13:01:57 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Tue, 11 Feb 2020 12:59:37 GMT]]></title><description><![CDATA[<p dir="auto">I'm using the MP1 latelly and have some considerations:<br />
Pliers: Good grip, well made. The point is perfect for fine and precise jobs.<br />
The wire striper is very good. The cutter can cut even the finer wires.<br />
But the pliers is only suited for light to medium jobs.<br />
(The tool flex when squeezed. Not a issue at all. It's necessary only understand the tool limitations).</p>
<p dir="auto">Bit holder: Good in the function. But don't stay properly closed. No snap.<br />
Had to file the G-10 scales to make It close a little better.</p>
<p dir="auto">Blades: Good size. Mine came very sharp out the box.</p>
<p dir="auto">Pry bar: I submited mine a lot of abuse. Zero problem. Unscatched.</p>
<p dir="auto">G-10 scales: good grip. But I had to file some points.</p>
<p dir="auto">Handle Splay: No complains. I have big hands and like spring assisted pliers.</p>
<p dir="auto">(Sorry for my bad english and for any mistakes)</p>
<p dir="auto">Overall a good tool. Good concept. But Gerber failed in some points.<br />
Expensive tool for what you get. But I really liked this one. <img src="https://uploads.tapatalk-cdn.com/20200211/0b4aff6043044d7374529b5fd1e05228.jpg" alt="" class="img-markdown  img-fluid" /><img src="https://uploads.tapatalk-cdn.com/20200211/0798d04ba9c2367a2ca46e6c9ba7edc3.jpg" alt="" class="img-markdown  img-fluid" /><img src="https://uploads.tapatalk-cdn.com/20200211/55d7b170a7e9a222eb88e65cff4d09c3.jpg" alt="" class="img-markdown  img-fluid" /><img src="https://uploads.tapatalk-cdn.com/20200211/5ef128fd7b674f34860d98f762f25be1.jpg" alt="" class="img-markdown  img-fluid" /><img src="https://uploads.tapatalk-cdn.com/20200211/b4846620a5fb1f68bdf1e30f90409ea8.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Enviado de meu moto g(6) usando o Tapatalk</p>
]]></description><link>https://multitool.ninja/post/2086564</link><guid isPermaLink="true">https://multitool.ninja/post/2086564</guid><dc:creator><![CDATA[Hevy (CT-782)]]></dc:creator><pubDate>Tue, 11 Feb 2020 12:59:37 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Tue, 19 Nov 2019 16:57:01 GMT]]></title><description><![CDATA[<p dir="auto">On one hand, I have to hand it to Gerber for yet again brilliant innovation, yet in this specific case, I do wish there weren't any springs.  As this will mean, you will have to fold this every time and if you are ladder, there is a risk of this falling off.</p>
<p dir="auto">In my opinion the reason Velcro is used instead of snap closures is likely because of price and timing.  While I am nearly 100% certain this is done by a machine, if this costs one penny less and one second less to use Velcro instead of a snap closure, I can completely see any company, not just Gerber using this.   Now the Center Drive sheath is exceptional and I really appreciate the fact Gerber produces this in USA and has one of my favorite statements embossed on the sheath as well.   That said, I rather Gerber put their time and effort into their tools rather than the sheaths as there is a sizable market for quality sheaths.</p>
]]></description><link>https://multitool.ninja/post/2046477</link><guid isPermaLink="true">https://multitool.ninja/post/2046477</guid><dc:creator><![CDATA[CarbideCruzer]]></dc:creator><pubDate>Tue, 19 Nov 2019 16:57:01 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Tue, 19 Nov 2019 08:21:44 GMT]]></title><description><![CDATA[<p dir="auto">I did sell my CD, so I can´t have a closer but maybe the Diesel Plierhead can be made to work inside the CD? The MP 600 heads will be a bit too thick I guess.</p>
]]></description><link>https://multitool.ninja/post/2046338</link><guid isPermaLink="true">https://multitool.ninja/post/2046338</guid><dc:creator><![CDATA[lowtech]]></dc:creator><pubDate>Tue, 19 Nov 2019 08:21:44 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Tue, 19 Nov 2019 08:04:09 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/carbidecruzer" aria-label="Profile: CarbideCruzer">@<bdi>CarbideCruzer</bdi></a> <a href="/post/2046278">said</a>:<br />
Apparently after calling Gerber this morning and speaking to  customer service agent, I learned this series was discontinued this year.   More than likely I am going to buy a MP1 MRO new before they become quite rare to find coupled with often a higher price point.</p>
<p dir="auto">While I do enjoy using my Center Drive Plus as this is a very well made mutli tool, I can't say I am exactly in favor of spring loaded pliers.  With that being said, do you think there is a way to remove the springs  without damaging this tool or do you think that would render this tool unusable?</p>
<p dir="auto">With perhaps few exceptions, brand new this item is roughly $100, so I am very skeptical of modifying a tool that there is no access to replacement parts let alone a warranty service.</p>
</blockquote>
<p dir="auto">The MP1(and CD) have the springs inside of the pliers pivot in a hollow chamber. Absolutely no removal.  :-\</p>
]]></description><link>https://multitool.ninja/post/2046337</link><guid isPermaLink="true">https://multitool.ninja/post/2046337</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Tue, 19 Nov 2019 08:04:09 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Tue, 19 Nov 2019 02:17:45 GMT]]></title><description><![CDATA[<p dir="auto">Apparently after calling Gerber this morning and speaking to  customer service agent, I learned this series was discontinued this year.   More than likely I am going to buy a MP1 MRO new before they become quite rare to find coupled with often a higher price point.</p>
<p dir="auto">While I do enjoy using my Center Drive Plus as this is a very well made mutli tool, I can't say I am exactly in favor of spring loaded pliers.  With that being said, do you think there is a way to remove the springs  without damaging this tool or do you think that would render this tool unusable?</p>
<p dir="auto">With perhaps few exceptions, brand new this item is roughly $100, so I am very skeptical of modifying a tool that there is no access to replacement parts let alone a warranty service.</p>
]]></description><link>https://multitool.ninja/post/2046278</link><guid isPermaLink="true">https://multitool.ninja/post/2046278</guid><dc:creator><![CDATA[CarbideCruzer]]></dc:creator><pubDate>Tue, 19 Nov 2019 02:17:45 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Mon, 18 Nov 2019 21:33:59 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Sam Lim <a href="/post/1979419">said</a>:<br />
Great pics and comparison Gman! I didn't realise that there's a weapons version. Tools are very similar to those on the efect.</p>
</blockquote>
<p dir="auto">Sam,</p>
<p dir="auto">I know it's been a while, but sorry I missed you reply!</p>
<p dir="auto">Thank you for the kind words!</p>
<p dir="auto">Indeed the Weapons MP1 has similarities to the eFect stuff. <img src="/assets/uploads/smileys/agreesign.gif" alt=":iagree:" title="I agree" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2046160</link><guid isPermaLink="true">https://multitool.ninja/post/2046160</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Mon, 18 Nov 2019 21:33:59 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Mon, 18 Nov 2019 04:06:17 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/clown" aria-label="Profile: clown">@<bdi>clown</bdi></a> <a href="/post/1824078">said</a>:<br />
It's funny you say that.  I had the same issue with an OHT too! Lol.  Was so fed up after I finally got LM to send me a good one I ended up selling it.  Which is probably what I'll end up doing with this one.  So if anyone wants to try out an MP1 and can accept a tiny bit of wiggle shoot me a PM. I'll give you a decent price  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Did you ever off-load the MP1 or do you still have it?</p>
]]></description><link>https://multitool.ninja/post/2045800</link><guid isPermaLink="true">https://multitool.ninja/post/2045800</guid><dc:creator><![CDATA[King_Gorilla]]></dc:creator><pubDate>Mon, 18 Nov 2019 04:06:17 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Fri, 26 Jul 2019 04:56:56 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gerleatherberman" aria-label="Profile: gerleatherberman">@<bdi>gerleatherberman</bdi></a> <a href="/post/1979399">said</a>:<br />
Found three varieties so far for the MP1. The MP1 Weapons Maintenance Pro(top), Original MP1(middle), and the Maintenance Pro(bottom).<br />
The Original MP1 with G10 handles feels higher quality than the molded plastic handles of the Pro and Weapons versions. But, that said, the Maintenance Pro and AR Weapons versions have the same build quality/fit &amp; finish as the original MP1.</p>
<p dir="auto"><img src="https://i.imgur.com/QyfpWGG.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.imgur.com/dP0Rfva.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">All three share the same pliers head. Finishes vary slightly, but not notably.<br />
<img src="https://i.imgur.com/V0Lf2PP.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Left to right:<br />
Maintenance Pro, Original, Weapons Maintenance.</p>
<p dir="auto"><img src="https://i.imgur.com/69SGff2.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Pro has driver/cross-cut file, a large hook, and lanyard loop. Original has two flat drivers, and Weapons has carbon scraper.<br />
<img src="https://i.imgur.com/pdcmZi6.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.imgur.com/4jn9K0R.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Pro has a gut hook at the tip of the SE blade and has a more aggressive grind pattern than the OG and Weapons.<br />
<img src="https://i.imgur.com/R1EBkgq.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Pro and OG have the chisel scraper thingies, while the Weapons has a "pin punch".<br />
<img src="https://i.imgur.com/yNePWKo.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Pro and OG have the pry-tool/bottle opener, while the Weapons has the thread mount(with angle pick from factory) for weapons maintenance bits(like pick, brush, etc)<br />
<img src="https://i.imgur.com/lagHNEp.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">Great pics and comparison Gman! I didn't realise that there's a weapons version. Tools are very similar to those on the efect.</p>
]]></description><link>https://multitool.ninja/post/1979419</link><guid isPermaLink="true">https://multitool.ninja/post/1979419</guid><dc:creator><![CDATA[Sam Lim]]></dc:creator><pubDate>Fri, 26 Jul 2019 04:56:56 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Fri, 26 Jul 2019 04:13:11 GMT]]></title><description><![CDATA[<p dir="auto">Found three varieties so far for the MP1. The MP1 Weapons Maintenance Pro(top), Original MP1(middle), and the Maintenance Pro(bottom).<br />
The Original MP1 with G10 handles feels higher quality than the molded plastic handles of the Pro and Weapons versions. But, that said, the Maintenance Pro and AR Weapons versions have the same build quality/fit &amp; finish as the original MP1.</p>
<p dir="auto"><img src="https://i.imgur.com/QyfpWGG.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.imgur.com/dP0Rfva.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">All three share the same pliers head. Finishes vary slightly, but not notably.<br />
<img src="https://i.imgur.com/V0Lf2PP.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Left to right:<br />
Maintenance Pro, Original, Weapons Maintenance.</p>
<p dir="auto"><img src="https://i.imgur.com/69SGff2.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Pro has driver/cross-cut file, a large hook, and lanyard loop. Original has two flat drivers, and Weapons has carbon scraper.<br />
<img src="https://i.imgur.com/pdcmZi6.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.imgur.com/4jn9K0R.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Pro has a gut hook at the tip of the SE blade and has a more aggressive grind pattern than the OG and Weapons.<br />
<img src="https://i.imgur.com/R1EBkgq.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Pro and OG have the chisel scraper thingies, while the Weapons has a "pin punch".<br />
<img src="https://i.imgur.com/yNePWKo.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Pro and OG have the pry-tool/bottle opener, while the Weapons has the thread mount(with angle pick from factory) for weapons maintenance bits(like pick, brush, etc)<br />
<img src="https://i.imgur.com/lagHNEp.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1979399</link><guid isPermaLink="true">https://multitool.ninja/post/1979399</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Fri, 26 Jul 2019 04:13:11 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Mon, 10 Dec 2018 17:15:04 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/loopcutter" aria-label="Profile: LoopCutter">@<bdi>LoopCutter</bdi></a> <a href="/post/1824798">said</a>:<br />
@ Clown - Did you start this thread in October 2017, or this year, (2018)?</p>
<p dir="auto">The date and time stamp indicates to me this thread is over a year old, yet the dates are concurrent from Oct 30, thru today Dec 8, 18?</p>
<p dir="auto">Confused.</p>
<p dir="auto">Yet interesting review, and disappointd results from Gerber and LM for warranty/quality issues.</p>
</blockquote>
<p dir="auto">Yup, started this last fall (2017) when I got my MP1.  Looks like I shelved it after a month or so of use.  Thread got resurrected by someone looking for input which reminded me to send mine in for warranty.</p>
]]></description><link>https://multitool.ninja/post/1825364</link><guid isPermaLink="true">https://multitool.ninja/post/1825364</guid><dc:creator><![CDATA[clown]]></dc:creator><pubDate>Mon, 10 Dec 2018 17:15:04 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Sun, 09 Dec 2018 20:57:16 GMT]]></title><description><![CDATA[<p dir="auto">@ Clown - Did you start this thread in October 2017, or this year, (2018)?</p>
<p dir="auto">The date and time stamp indicates to me this thread is over a year old, yet the dates are concurrent from Oct 30, thru today Dec 8, 18?</p>
<p dir="auto">Confused.</p>
<p dir="auto">Yet interesting review, and disappointd results from Gerber and LM for warranty/quality issues.</p>
]]></description><link>https://multitool.ninja/post/1824798</link><guid isPermaLink="true">https://multitool.ninja/post/1824798</guid><dc:creator><![CDATA[LoopCutter]]></dc:creator><pubDate>Sun, 09 Dec 2018 20:57:16 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Sun, 09 Dec 2018 20:19:03 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gerleatherberman" aria-label="Profile: gerleatherberman">@<bdi>gerleatherberman</bdi></a> <a href="/post/1824740">said</a>:<br />
I think loose pivots may be an inherent issue. Mine doesn't have much play, but it has a tiny bit. I know it would get worse if I used them.  :ahhh</p>
<p dir="auto">Those jaws should have never been spring loaded. They would be twice as strong without the spring cavity.</p>
</blockquote>
<p dir="auto">I agree.  That's why I don't really expect much else from Gerber.  If they would offer to trade for a different, comparably priced tool, I'd probably go for that but I don't see that happeneing.</p>
]]></description><link>https://multitool.ninja/post/1824755</link><guid isPermaLink="true">https://multitool.ninja/post/1824755</guid><dc:creator><![CDATA[clown]]></dc:creator><pubDate>Sun, 09 Dec 2018 20:19:03 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Sun, 09 Dec 2018 20:09:52 GMT]]></title><description><![CDATA[<p dir="auto">I think loose pivots may be an inherent issue. Mine doesn't have much play, but it has a tiny bit. I know it would get worse if I used them.  :ahhh</p>
<p dir="auto">Those jaws should have never been spring loaded. They would be twice as strong without the spring cavity.</p>
]]></description><link>https://multitool.ninja/post/1824740</link><guid isPermaLink="true">https://multitool.ninja/post/1824740</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Sun, 09 Dec 2018 20:09:52 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Sun, 09 Dec 2018 19:49:17 GMT]]></title><description><![CDATA[<p dir="auto">I did end up shooting an email back to Gerber letting them know I was less than pleased.  Not really in the hopes of them doing anything more but more just to tell them.</p>
]]></description><link>https://multitool.ninja/post/1824727</link><guid isPermaLink="true">https://multitool.ninja/post/1824727</guid><dc:creator><![CDATA[clown]]></dc:creator><pubDate>Sun, 09 Dec 2018 19:49:17 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Sat, 08 Dec 2018 22:12:58 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gerleatherberman" aria-label="Profile: gerleatherberman">@<bdi>gerleatherberman</bdi></a> <a href="/post/1823873">said</a>:<br />
I know the frustration. Last time for me was an OHT with highly misaligned pliers. New tool, pliers were almost as bad as the ones I sent in. <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
<p dir="auto">MT makers,<br />
If I'm pissed enough to send a tool back for jacked up pliers, please check the one you are sending me to make sure it doesn't have the same problem. <img src="/assets/uploads/smileys/rant.gif" alt=":rant:" title="rant!" class="forum-smiley emoji" /><br />
/rant.</p>
<p dir="auto">Looks like time for a little peening. &gt;:D<br />
Worst case: they are too tight and need working in.  :)</p>
</blockquote>
<p dir="auto">It's funny you say that.  I had the same issue with an OHT too! Lol.  Was so fed up after I finally got LM to send me a good one I ended up selling it.  Which is probably what I'll end up doing with this one.  So if anyone wants to try out an MP1 and can accept a tiny bit of wiggle shoot me a PM. I'll give you a decent price  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1824078</link><guid isPermaLink="true">https://multitool.ninja/post/1824078</guid><dc:creator><![CDATA[clown]]></dc:creator><pubDate>Sat, 08 Dec 2018 22:12:58 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Sat, 08 Dec 2018 18:15:08 GMT]]></title><description><![CDATA[<p dir="auto">I know the frustration. Last time for me was an OHT with highly misaligned pliers. New tool, pliers were almost as bad as the ones I sent in. <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
<p dir="auto">MT makers,<br />
If I'm pissed enough to send a tool back for jacked up pliers, please check the one you are sending me to make sure it doesn't have the same problem. <img src="/assets/uploads/smileys/rant.gif" alt=":rant:" title="rant!" class="forum-smiley emoji" /><br />
/rant.</p>
<p dir="auto">Looks like time for a little peening. &gt;:D<br />
Worst case: they are too tight and need working in.  :)</p>
]]></description><link>https://multitool.ninja/post/1823873</link><guid isPermaLink="true">https://multitool.ninja/post/1823873</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Sat, 08 Dec 2018 18:15:08 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Sat, 08 Dec 2018 18:07:15 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/clown" aria-label="Profile: clown">@<bdi>clown</bdi></a> <a href="/post/1823854">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gerleatherberman" aria-label="Profile: gerleatherberman">@<bdi>gerleatherberman</bdi></a> <a href="/post/1823743">said</a>:</p>
<blockquote>
<p dir="auto">Same basic frame, same pliers, and similar toolset; but MRO. I wouldn't expect it to be of any higher inherent quality and/or strength.</p>
</blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/clown" aria-label="Profile: clown">@<bdi>clown</bdi></a> said:</p>
<blockquote>
<blockquote>
<p dir="auto">Nailed it!</p>
<p dir="auto">UPDATE: Got an email from Gerber on the 5th saying my warranty had been processed and replacement should be arriving in 7-10 days.  Pretty quick turn around.</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/woohoo.gif" alt=":woohoo:" title="Woohoo" class="forum-smiley emoji" /><br />
I sure hope the replacement has zero play in the pliers.  <img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">So, what apears to be a brand new in the box with sheath and all MP1 arrived on my door step this morning.  Sure enough this one has plier play right outta the box.  Needless to say I'm a bit pi$$ed about it.</p>
<p dir="auto">Now, in all fairness, the play is minimal and likely wont affect the tools usefulness.  But to return a tool for a specific problem and to get one back with the EXACT same problem is result of laziness and apathy, pure and simple.  They must have just grabbed one off a shelf and threw it in a box and shipped it to me without even checking it.  Thanks for the new MP1, Gerber.  <img src="/assets/uploads/smileys/icon_banghead.gif" alt=":bnghd:" title="bang head" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I too experience the same exact problem.. Diesel have a bit of machining problem on their cutter where they will leave a small gap between the cutter, making cutting soft cables impossible. I return a new one and they sent me back a nib with the same exact issue!!  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1823866</link><guid isPermaLink="true">https://multitool.ninja/post/1823866</guid><dc:creator><![CDATA[Sam Lim]]></dc:creator><pubDate>Sat, 08 Dec 2018 18:07:15 GMT</pubDate></item><item><title><![CDATA[Reply to The Gerber MP1 Thread on Sat, 08 Dec 2018 17:50:55 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gerleatherberman" aria-label="Profile: gerleatherberman">@<bdi>gerleatherberman</bdi></a> <a href="/post/1823743">said</a>:<br />
Same basic frame, same pliers, and similar toolset; but MRO. I wouldn't expect it to be of any higher inherent quality and/or strength.</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/clown" aria-label="Profile: clown">@<bdi>clown</bdi></a> said:</p>
<blockquote>
<p dir="auto">Nailed it!</p>
<p dir="auto">UPDATE: Got an email from Gerber on the 5th saying my warranty had been processed and replacement should be arriving in 7-10 days.  Pretty quick turn around.</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/woohoo.gif" alt=":woohoo:" title="Woohoo" class="forum-smiley emoji" /><br />
I sure hope the replacement has zero play in the pliers.  <img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">So, what apears to be a brand new in the box with sheath and all MP1 arrived on my door step this morning.  Sure enough this one has plier play right outta the box.  Needless to say I'm a bit pi$$ed about it.</p>
<p dir="auto">Now, in all fairness, the play is minimal and likely wont affect the tools usefulness.  But to return a tool for a specific problem and to get one back with the EXACT same problem is result of laziness and apathy, pure and simple.  They must have just grabbed one off a shelf and threw it in a box and shipped it to me without even checking it.  Thanks for the new MP1, Gerber.  <img src="/assets/uploads/smileys/icon_banghead.gif" alt=":bnghd:" title="bang head" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1823854</link><guid isPermaLink="true">https://multitool.ninja/post/1823854</guid><dc:creator><![CDATA[clown]]></dc:creator><pubDate>Sat, 08 Dec 2018 17:50:55 GMT</pubDate></item></channel></rss>