Spyderco Byrd Wrench
-
It is a decent size - slightly larger than a LM New Wave.
-
Here's some detail of the blade locking mechanism.
-
The Byrd logo is prominently featured along with the Byrd finger hole. I really like it.
-
It has a bead-blasted finish that is very attractive but easily scratched. Here's the adjustable wrench - note that the jaws do not exactly match at the tip.
-
It has a magnetic hex bit holder on one end.
-
The backside has a rasp with medium teeth - different than the Spyderwrench which had a diamond-coated file. You can see the spring holder here.
-
Here's a closeup of the slip-joint plier mechanism.
-
Closeup of the pliers - notice that the lower jaw is much wider.
-
The rasp also acts as a barrier to the bits falling out. It comes with two Phillips & two slotted.
-
Side views.
-
Another closeup of the slip-joint mechanism.
-
Here's the pliers in the smaller slip-joint position & then slipping between the two positions.
-
When you open the tool & rotate it 180 degrees it has a locking mechanism to hold it in the open position.
-
Side views in 180 degree position.
-
Releasing the 180 degree locking mechanism.
-
When closed the rasp works as a lock pin to hold the tools together tightly. Note the wear already from the pin sliding near the lock divot.
-
The rasp is fairly aggressive & is flat on the side that rests against the bits in the handle. Note that the backside which rests in the spring was not finished well.
-
Here's the hole it rests in & the divot as well as the spring it rests in on the other end.
-
Removing bits is a little difficult. They snap into the hex cutout cleanly & are held very tightly - probably a neodymium magnet.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login