<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Crescent Toolzall Electrician Pro]]></title><description><![CDATA[<p dir="auto">Well the first review wasn't that bad so I thought I would try another.  Any input is greatly appreciated. Some of the pics turned out a little better (different background). So here goes.</p>
<p dir="auto">Where to begin? Except for the Leatherman Squirt E4 I believe that this may be the only tool I know of with a wire stripping tool head.<br />
<strong>The tool itself</strong><br />
<img src="http://i41.photobucket.com/albums/e276/poncho6556/Picture222.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">This tool is a Bear and Son Cutlery Bear Jaws Electrician that has been rebranded by Crescent to a Toolzall Electrician Pro.</p>
<p dir="auto">This is a 4 inch tool with a wire stipping head. The tools in it are as follow it has a serrated/plain blade combo, 2 straight screwdrivers, a phillips head screwdriver, a file, a saw, a can/bottle opener, a ruler and a lanyard ring (if you count that?) and all the tools lock and are outside opening which is a very good thing.  The handles are also very comfortable to use when using the wire stripping head.  Good solid tool with solid design.</p>
<p dir="auto"><strong>The Plier head</strong><br />
<img src="http://i41.photobucket.com/albums/e276/poncho6556/Picture224.jpg" alt="" class="img-markdown  img-fluid" /> <img src="http://i41.photobucket.com/albums/e276/poncho6556/Picture226.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Let's start by talking about the wire stripping head. The tool specifically says to only cut copper with it. It has a wire cutter as with any standard plier based multi.  It can strip wire from 10 gauge down to 20 gauge or 2.6 mm to 0.80 mm wire.  Two hole that it says are for bending wire and on the tip has a small tip that can be used as pliers.</p>
<p dir="auto"><strong>The blade</strong><br />
<img src="http://i41.photobucket.com/albums/e276/poncho6556/Picture225.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The blade that comes with the EP is a combo serrated/plain edge knife blade. Personally I don't care for this type of blade.  It seems to be the only blade that they put on any of there tools that only have 1 blade in them.  It can handle most cutting tasks and I guess that is what they are going for(the most versatility). The problem is it is only a mediocre blade for both types of cutting.  But as I said it is a serviceable tool.</p>
<p dir="auto"><strong>The screwdrivers</strong><br />
<img src="http://i41.photobucket.com/albums/e276/poncho6556/Picture227.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The EP has 2 straight drivers and 1 phillips head driver.  The 2 straight drivers are nothing special they get the job done as most drivers of this type do, but the phillips driver is very well built and has a very good tip on the end. I like the phillips on this tool it seems to be a very good quality driver.</p>
<p dir="auto"><strong>The file</strong><br />
<img src="http://i41.photobucket.com/albums/e276/poncho6556/Picture230.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Now to the file. It is a three sided file with smooth on 1 side and course on the other side. Since it is a Crescent brand tool one would think that it should have a Nicholson file on it since they are both owned by the same company. This is not the case though. The file is fine don't get me wrong it can be used for most filing applications, but for me though I like a little more filing surface it goes to the tip which is a plus, but doesn't go very far down the body itself.</p>
<p dir="auto"><strong>The saw</strong><br />
<img src="http://i41.photobucket.com/albums/e276/poncho6556/Picture229.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Well back on a good note. The saw is a tool that shines in this multi.  It is a very aggressive cutting saw (it has fewer teeth than typical Leatherman/Vic saws which means more aggressive) that cuts on both a push and pull stroke.  Very effective cutting tool.</p>
<p dir="auto"><strong>The can/bottle opener</strong><br />
<img src="http://i41.photobucket.com/albums/e276/poncho6556/Picture010-1.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The can/bottle opener is pretty much a standard design. It seems as though it would be capable of opening can and bottles pretty much the same as a Leatherman or Vic SAK.</p>
<p dir="auto"><strong>The ruler</strong><br />
<img src="http://i41.photobucket.com/albums/e276/poncho6556/Picture008-1.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The ruler has both standard and metric measurement's each are on there respective sides and seems to be engraved very well.</p>
<p dir="auto"><strong>The lanyard ring</strong><br />
<img src="http://i41.photobucket.com/albums/e276/poncho6556/Picture232.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I don't know if you count it or not but it's there it is a fold out type lanyard ring that takes up a space in my opinion.  I would have preferred to have seen another tool in it's place perhaps an awl. Some people like them so they put them in I guess.</p>
<p dir="auto"><strong>Locking Tabs</strong><br />
<img src="http://i41.photobucket.com/albums/e276/poncho6556/Picture234.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">All the tools lock in this model, the odd thing is how they came up to unlock them.  You can always unlock them the same way as you do the Super Tool but they have these little flaps that stick out on each side that you push in when you have a tool out and want to unlock it.  It works effectively but when the tool is closed they stick out a bit.  Just seems like an odd way to unlock tools.</p>
<p dir="auto"><strong>Pros</strong></p>
<p dir="auto">I like the tool overall it has several useful tools.  The plier head is something not normally seen on a multi and they put it in there with very little problem.  It is very robust, smooth opening, plus all tools are outside opening and it seems built like a tank.  In my opinion it is a great tool.</p>
<p dir="auto"><strong>Cons</strong></p>
<p dir="auto">The knife blade seems only semi useful (of course this is only my opinion) and the unlock tabs get in the way a bit.  The file is also lacking a bit of filing surface. Plus it also suffers from tool clumping</p>
<p dir="auto">That's my two cents worth thanks for reading. I will take advice so please if you see something wrong tell me.  The pics are a little better this time at least I think.</p>
]]></description><link>https://multitool.ninja/topic/7783/crescent-toolzall-electrician-pro</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 15:48:18 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/7783.rss" rel="self" type="application/rss+xml"/><pubDate>Tue, 25 Nov 2008 03:31:35 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Thu, 04 Dec 2008 15:33:09 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@american lockpicker <a href="/post/145819">said</a>:<br />
Wheres it made? The last Klein knife I seen was a copy of a Buck 110 and it was Japanese.</p>
</blockquote>
<p dir="auto">I'm not 100% positive, but the tang stamp on the hi-res photo of the knife on their website is marked "Klein Tools, Chicago USA"<br />
<img src="http://www.service.kleintools.com/Marketing/Catalog_Imagery/1550-2_ICON.JPG" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/145859</link><guid isPermaLink="true">https://multitool.ninja/post/145859</guid><dc:creator><![CDATA[gafftapegreenia]]></dc:creator><pubDate>Thu, 04 Dec 2008 15:33:09 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Thu, 04 Dec 2008 07:02:12 GMT]]></title><description><![CDATA[<p dir="auto">If you want a knife with an electrician blade the Alox Electrician Plus that I have has a very similar blade to that plus you get a saw, awl and some other goodies that have a lifetime warranty :D</p>
]]></description><link>https://multitool.ninja/post/145822</link><guid isPermaLink="true">https://multitool.ninja/post/145822</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Thu, 04 Dec 2008 07:02:12 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Thu, 04 Dec 2008 06:35:14 GMT]]></title><description><![CDATA[<p dir="auto">Wheres it made? The last Klein knife I seen was a copy of a Buck 110 and it was Japanese.</p>
]]></description><link>https://multitool.ninja/post/145819</link><guid isPermaLink="true">https://multitool.ninja/post/145819</guid><dc:creator><![CDATA[american lockpicker]]></dc:creator><pubDate>Thu, 04 Dec 2008 06:35:14 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Thu, 04 Dec 2008 06:30:14 GMT]]></title><description><![CDATA[<p dir="auto">Klein makes one that might be worth considering. It's on my wish list.</p>
]]></description><link>https://multitool.ninja/post/145817</link><guid isPermaLink="true">https://multitool.ninja/post/145817</guid><dc:creator><![CDATA[gafftapegreenia]]></dc:creator><pubDate>Thu, 04 Dec 2008 06:30:14 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Thu, 04 Dec 2008 06:14:09 GMT]]></title><description><![CDATA[<p dir="auto">I didn't know it wasn't being produced anymore. I think after Christmas I'll get one I have an Irish Schrade one right now but the quality sucks.</p>
]]></description><link>https://multitool.ninja/post/145816</link><guid isPermaLink="true">https://multitool.ninja/post/145816</guid><dc:creator><![CDATA[american lockpicker]]></dc:creator><pubDate>Thu, 04 Dec 2008 06:14:09 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Wed, 03 Dec 2008 04:11:29 GMT]]></title><description><![CDATA[<p dir="auto">Actually, from what I've read the knife was actually made by Camillus, or at least one run was. Either way the Case electrician's knife is not currently in production.</p>
<p dir="auto">The point here is I would like such a blade on an electrical oriented multi.</p>
]]></description><link>https://multitool.ninja/post/145475</link><guid isPermaLink="true">https://multitool.ninja/post/145475</guid><dc:creator><![CDATA[gafftapegreenia]]></dc:creator><pubDate>Wed, 03 Dec 2008 04:11:29 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Wed, 03 Dec 2008 02:43:57 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gafftapegreenia" aria-label="Profile: gafftapegreenia">@<bdi>gafftapegreenia</bdi></a> <a href="/post/145438">said</a>:<br />
Actually, since it already has a saw, I would prefer a PLAIN edge sheepsfoot blade. I'm thinking along the lines of the old, two-bladed electricians knives and the Vic Electrician. Those blades are great wire strippers.</p>
</blockquote>
<p dir="auto">Case makes a nice electricians knife and its American made.</p>
]]></description><link>https://multitool.ninja/post/145464</link><guid isPermaLink="true">https://multitool.ninja/post/145464</guid><dc:creator><![CDATA[american lockpicker]]></dc:creator><pubDate>Wed, 03 Dec 2008 02:43:57 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Wed, 03 Dec 2008 02:35:53 GMT]]></title><description><![CDATA[<p dir="auto">Hey I also did a review on the LM Super Tool if you like it :) Here's a link ;)</p>
<p dir="auto">/topic/7748</p>
]]></description><link>https://multitool.ninja/post/145461</link><guid isPermaLink="true">https://multitool.ninja/post/145461</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Wed, 03 Dec 2008 02:35:53 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Wed, 03 Dec 2008 02:20:52 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/parnass" aria-label="Profile: parnass">@<bdi>parnass</bdi></a> <a href="/post/145444">said</a>:<br />
Thanks for writing and posting the review, Poncho65.</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> Thanks for reading it parnass :D</p>
]]></description><link>https://multitool.ninja/post/145453</link><guid isPermaLink="true">https://multitool.ninja/post/145453</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Wed, 03 Dec 2008 02:20:52 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Wed, 03 Dec 2008 00:55:12 GMT]]></title><description><![CDATA[<p dir="auto">Thanks for writing and posting the review, Poncho65.</p>
]]></description><link>https://multitool.ninja/post/145444</link><guid isPermaLink="true">https://multitool.ninja/post/145444</guid><dc:creator><![CDATA[parnass]]></dc:creator><pubDate>Wed, 03 Dec 2008 00:55:12 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Wed, 03 Dec 2008 00:28:14 GMT]]></title><description><![CDATA[<p dir="auto">Actually, since it already has a saw, I would prefer a PLAIN edge sheepsfoot blade. I'm thinking along the lines of the old, two-bladed electricians knives and the Vic Electrician. Those blades are great wire strippers.</p>
]]></description><link>https://multitool.ninja/post/145438</link><guid isPermaLink="true">https://multitool.ninja/post/145438</guid><dc:creator><![CDATA[gafftapegreenia]]></dc:creator><pubDate>Wed, 03 Dec 2008 00:28:14 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Tue, 02 Dec 2008 12:30:11 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/anthony" aria-label="Profile: Corrugated">@<bdi>Corrugated</bdi></a> <a href="/post/145232">said</a>:<br />
And back on topic kinda, why a serrated sheepsfoot for electrical work?  I'm thinking for slicing heavy sheathing around a wire..?</p>
</blockquote>
<p dir="auto">Yep, that's the idea. Most guys use a utility knife, which IMO is the best tool for the job- small blade with a straight sharp point.</p>
]]></description><link>https://multitool.ninja/post/145296</link><guid isPermaLink="true">https://multitool.ninja/post/145296</guid><dc:creator><![CDATA[NeitherExtreme]]></dc:creator><pubDate>Tue, 02 Dec 2008 12:30:11 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Tue, 02 Dec 2008 04:37:35 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@american lockpicker <a href="/post/145230">said</a>:<br />
Does anyone on here have a Crunch I don't think I have ever heard anyone post about using one?</p>
</blockquote>
<p dir="auto">There was a Crunch Craze a while back where either folks were saying how great they were, and other folks were willing to give their left arm for one :D</p>
<p dir="auto">I've got one and EDC it sometimes, it's a great tool and still fetches a high price on ebay..</p>
<p dir="auto">And back on topic kinda, why a serrated sheepsfoot for electrical work?  I'm thinking for slicing heavy sheathing around a wire..?</p>
]]></description><link>https://multitool.ninja/post/145232</link><guid isPermaLink="true">https://multitool.ninja/post/145232</guid><dc:creator><![CDATA[Anthony]]></dc:creator><pubDate>Tue, 02 Dec 2008 04:37:35 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Tue, 02 Dec 2008 04:26:58 GMT]]></title><description><![CDATA[<p dir="auto">Does anyone on here have a Crunch I don't think I have ever heard anyone post about using one?</p>
]]></description><link>https://multitool.ninja/post/145230</link><guid isPermaLink="true">https://multitool.ninja/post/145230</guid><dc:creator><![CDATA[american lockpicker]]></dc:creator><pubDate>Tue, 02 Dec 2008 04:26:58 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Tue, 02 Dec 2008 04:25:12 GMT]]></title><description><![CDATA[<p dir="auto">Don't believe a crimper could be added but the rest of the tools do swap out with LM (old school LM that is) I put a PSTII diamond file on my Maintenance Pro (the shears version) and it swapped out pretty good.  One might take the serrated sheep foot blade of a LM Crunch and put it in there (but who would want to take a Crunch apart :ahhh ) <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">Plus I don't have a Crunch they may have a totally different end on them :-\</p>
]]></description><link>https://multitool.ninja/post/145229</link><guid isPermaLink="true">https://multitool.ninja/post/145229</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Tue, 02 Dec 2008 04:25:12 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Tue, 02 Dec 2008 00:13:22 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nutznboltz" aria-label="Profile: Nutznboltz">@<bdi>Nutznboltz</bdi></a> <a href="/post/145159">said</a>:<br />
I think a serrated sheepsfoot blade would've been more useful for electrical work and not sure why there's a saw, a crimper would've been nice.</p>
</blockquote>
<p dir="auto">I agree 100% about the sheepsfoot blade and crimper. A sheepsfoot blade seems like a no-brainer for anyone who's done electrical work. Saws can be useful for drywall and such.</p>
]]></description><link>https://multitool.ninja/post/145175</link><guid isPermaLink="true">https://multitool.ninja/post/145175</guid><dc:creator><![CDATA[NeitherExtreme]]></dc:creator><pubDate>Tue, 02 Dec 2008 00:13:22 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Mon, 01 Dec 2008 23:12:56 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/poncho65" aria-label="Profile: Poncho65">@<bdi>Poncho65</bdi></a> <a href="/post/144457">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nutznboltz" aria-label="Profile: Nutznboltz">@<bdi>Nutznboltz</bdi></a> <a href="/post/143507">said</a>:</p>
<blockquote>
<p dir="auto">Nice tool, I have the exact same one.  Re-wired my garage with this and it was a solid performer.<br />
I didn't like how the release tabs protruded from the closed tool so I filed them down at the point where they contact the lock and now they sit flush with the handles.<br />
Apparently Cresent made another version of this which included a robertson (square drive) screwdriver.  I tried locating one but couldn't find any.</p>
<p dir="auto">great review.</p>
</blockquote>
<p dir="auto">Was it as adequate of a wire stripper as a dedicated pair? if you don't mind me asking :) also did you happen to use the wire bender holes on the head as they say to on the back of the packaging?</p>
</blockquote>
<p dir="auto">For general electrical work - wire stripping/ wire bending it is excellent.  the electrician head is as good as any proffesional models I've used.  I did not use the holes for bending wire, I prefered using the small needle nose pliers on the tip of the head.  For bending or looping the wire for the terminal screws it works much easier, though I'm sure the holes would work just as well.  I like this tool alot although I think a serrated sheepsfoot blade would've been more useful for electrical work and not sure why there's a saw, a crimper would've been nice.</p>
]]></description><link>https://multitool.ninja/post/145159</link><guid isPermaLink="true">https://multitool.ninja/post/145159</guid><dc:creator><![CDATA[Nutznboltz]]></dc:creator><pubDate>Mon, 01 Dec 2008 23:12:56 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Sun, 30 Nov 2008 01:01:12 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nutznboltz" aria-label="Profile: Nutznboltz">@<bdi>Nutznboltz</bdi></a> <a href="/post/143507">said</a>:<br />
Nice tool, I have the exact same one.  Re-wired my garage with this and it was a solid performer.<br />
I didn't like how the release tabs protruded from the closed tool so I filed them down at the point where they contact the lock and now they sit flush with the handles.<br />
Apparently Cresent made another version of this which included a robertson (square drive) screwdriver.  I tried locating one but couldn't find any.</p>
<p dir="auto">great review.</p>
</blockquote>
<p dir="auto">Was it as adequate of a wire stripper as a dedicated pair? if you don't mind me asking :) also did you happen to use the wire bender holes on the head as they say to on the back of the packaging?</p>
]]></description><link>https://multitool.ninja/post/144457</link><guid isPermaLink="true">https://multitool.ninja/post/144457</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Sun, 30 Nov 2008 01:01:12 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Fri, 28 Nov 2008 04:42:45 GMT]]></title><description><![CDATA[<p dir="auto">Thanks guys - glad to be onboard.</p>
]]></description><link>https://multitool.ninja/post/143720</link><guid isPermaLink="true">https://multitool.ninja/post/143720</guid><dc:creator><![CDATA[Nutznboltz]]></dc:creator><pubDate>Fri, 28 Nov 2008 04:42:45 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Fri, 28 Nov 2008 03:44:38 GMT]]></title><description><![CDATA[<p dir="auto">Welcome.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/143696</link><guid isPermaLink="true">https://multitool.ninja/post/143696</guid><dc:creator><![CDATA[donvito]]></dc:creator><pubDate>Fri, 28 Nov 2008 03:44:38 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Fri, 28 Nov 2008 01:50:44 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Micky d <a href="/post/143510">said</a>:<br />
Welcome to the forum mate :)</p>
</blockquote>
<p dir="auto">What he said :D Welcome <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/143673</link><guid isPermaLink="true">https://multitool.ninja/post/143673</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Fri, 28 Nov 2008 01:50:44 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Thu, 27 Nov 2008 20:55:24 GMT]]></title><description><![CDATA[<p dir="auto">Welcome to the forum mate :)</p>
]]></description><link>https://multitool.ninja/post/143510</link><guid isPermaLink="true">https://multitool.ninja/post/143510</guid><dc:creator><![CDATA[Mike, Lord of the Spammers!]]></dc:creator><pubDate>Thu, 27 Nov 2008 20:55:24 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Thu, 27 Nov 2008 20:52:53 GMT]]></title><description><![CDATA[<p dir="auto">Nice tool, I have the exact same one.  Re-wired my garage with this and it was a solid performer.<br />
I didn't like how the release tabs protruded from the closed tool so I filed them down at the point where they contact the lock and now they sit flush with the handles.<br />
Apparently Cresent made another version of this which included a robertson (square drive) screwdriver.  I tried locating one but couldn't find any.</p>
<p dir="auto">great review.</p>
]]></description><link>https://multitool.ninja/post/143507</link><guid isPermaLink="true">https://multitool.ninja/post/143507</guid><dc:creator><![CDATA[Nutznboltz]]></dc:creator><pubDate>Thu, 27 Nov 2008 20:52:53 GMT</pubDate></item><item><title><![CDATA[Reply to Crescent Toolzall Electrician Pro on Thu, 27 Nov 2008 17:49:04 GMT]]></title><description><![CDATA[<p dir="auto">I have the earlier version of that tool the PST type one. Also does your wire strippers have a lot of play? Mine have a lot compared to my Radio Shack Leatherman.</p>
]]></description><link>https://multitool.ninja/post/143464</link><guid isPermaLink="true">https://multitool.ninja/post/143464</guid><dc:creator><![CDATA[american lockpicker]]></dc:creator><pubDate>Thu, 27 Nov 2008 17:49:04 GMT</pubDate></item></channel></rss>