<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Can Opener Comparison]]></title><description><![CDATA[<p dir="auto">Ah, the can opener. The device for extracting food that has somehow become encased in metal. Loved and hated; essential and useless.<br />
You may not encounter canned goods that often, or it may be a ring-pull can, or a pre-cut one with the key provided.<br />
Nevertheless, there are still cans out there that require an opener, hence its inclusion, to this day, in multi-tools.</p>
<p dir="auto"><img src="https://i.imgur.com/iKHrKrv.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Having gone through a few cans recently, I decided to try out all my different can openers included in my multi-tools, and maybe use an arbitrary point system to arrange them in an order that might make some sense.<br />
Lynn has gone through <a href="/topic/36798">scissors</a>, if you'd like to take a look.</p>
<p dir="auto"><img src="https://i.imgur.com/E8cOQe6.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Some can openers cannot even open cans, despite having "can" in their very name, and having supposedly gone through testing before they hit the market.<br />
For those who can find their way around a can rim, there are some qualities I am looking for.</p>
<p dir="auto"><strong>Features of interest</strong><br />
-Ease of initial punching through the can top.<br />
-Ergonomics are important. I want the tool not to hurt me in the process.</p>
<ul>
<li>I do not want it to get stuck in the can and require time and effort to get it out. Locking ones have an advantage, though I will not deduct points solely for the lack of a locking mechanism.</li>
<li>I want it to cut cleanly. Ratio of cutting to bending the can top will not be taken into account. I am after a clean cut, with low risk of sharp edges cutting me later.</li>
<li>It would be nice if it did not slip off the rim of the can. I want to rock it back and forth, in a consistent cut.</li>
</ul>
<p dir="auto">That makes five categories eligible for points. Contestants will get one point for passing, two points for passing with distinction, and no points for failure to meet expectations.</p>
<p dir="auto"><strong>Features not considered for points</strong><br />
-Proper placement. If the can opener cannot even hook onto the can rim, it is not a can opener. I want it as far left in the handle as possible, since I am right-handed. A functional can opener will be in an adequate position to open cans, for it to be functional at all. Instead of awarding a point to all functional can openers, we'll lump this with comfort or something.<br />
-Additional features (wire-stripper, flatheads) are not considered for this. I just want some stew, vegetables, or fruit out of a tin.<br />
-Ease of access. It may require a handle to be unfolded, to get to the can opener. Saving three seconds is not important.<br />
-Speed. Any decent can opener will open a can in a reasonable and comparable amount of time. I will not be on the brink of dying from hunger when I start, so the difference will not be taken into account.</p>
<p dir="auto"><strong>Benchmark</strong><br />
The benchmark will be the Leatherman Core. Excellent in all required fields, it is my go-to can opener, and I have no complaints whatsoever with it. Great ergonomics, great edge angle and piercing point, easy, clean cut, no sharp edges left behind, locking, and no slipping off the rim. It scores 2 points in every feature, for a total of a perfect 10.<br />
<img src="https://i.imgur.com/RDT1Zby.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>Contestants</strong><br />
In total, sixteen can openers were pitted against the Core.<br />
Leatherman Charge AL<br />
Leatherman Juice CS4 (old)<br />
Leatherman Mini-Tool<br />
Victorinox SwissChamp<br />
Victorinox Deluxe Tinker<br />
Victorinox Spirit<br />
Gerber MP400<br />
Ganzo G302-B<br />
Roxon Storm (default and modded)<br />
Wenger Highlander<br />
Buck BuckTool 360<br />
Schrade USA Tough Tool<br />
Bear &amp; Son Bear Jaws (locking variant)<br />
Craftright multi-tool<br />
SOG Pocket Power Plier<br />
Coast LED Pocket Pliers</p>
<p dir="auto"><img src="https://i.imgur.com/SzvIvIU.jpg?2" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Some tools are representing others in their series, which share the same can opener, or simply other models altogether, though with the identical can opener. Ergonomics vary between different multi-tools with the same can opener, but it is still a very similar experience.</p>
]]></description><link>https://multitool.ninja/topic/78010/can-opener-comparison</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 00:17:42 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/78010.rss" rel="self" type="application/rss+xml"/><pubDate>Thu, 12 Jul 2018 17:28:33 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Can Opener Comparison on Sun, 02 Aug 2026 13:53:37 GMT]]></title><description><![CDATA[<p dir="auto">For just an opener, I'd agree that the P-38 is most efficient . That said, I use the spoon part of my knock-off FRED at least a few times a year, so it can be worth it if you have the space.</p>
]]></description><link>https://multitool.ninja/post/2583345</link><guid isPermaLink="true">https://multitool.ninja/post/2583345</guid><dc:creator><![CDATA[BPRoberts]]></dc:creator><pubDate>Sun, 02 Aug 2026 13:53:37 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Fri, 07 Aug 2026 13:12:17 GMT]]></title><description><![CDATA[<p dir="auto">Field Ration Eating Device (F.R.E.D)</p>
<p dir="auto"><a href="https://en.wikipedia.org/wiki/Field_ration_eating_device" rel="nofollow ugc">https://en.wikipedia.org/wiki/Field_ration_eating_device</a></p>
<p dir="auto">The F.R.E.D. is the Australian version of the P-38 can opener. The blade piece and cutting edge are nearly identical to the P-38, as was performance.</p>
<p dir="auto"><img src="https://i.imgur.com/zTcYaGZ.jpeg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Despite being larger than the P-51, the FRED performs much more closely to the P-38. The increased length of the spoon end would theoretically provide some additional leverage, but at the same time, the P-51 seems to be the perfect length for this. The FRED's edge length is also a little shorter than the P-51, so you will make slightly shorter cuts. Also, the last time I saw a hinge this oversized was in Schindler's List. The P-38 and P-51 have small, unobtrusive hinges.</p>
<p dir="auto">Initial punching through was extremely easy.<br />
Comfort-wise, not good, not bad. My thumb kept pushing against the bottle opener tooth, so I had to adjust my grip a few times.<br />
It never jammed and never slipped off the can rim.<br />
Cutting and tracing around the lid was easy. The edge is at a perfect angle to keep advancing with each cut. The tool weighs almost nothing so fatigue would occur only with an improper grip. The last cut, to completely remove the lid from the can, was also easy. Some can openers struggle to cut off the lid at the end, but the FRED had no trouble. The FRED left behind a somewhat jagged edge, very similar to what the P-38 did.</p>
<p dir="auto">As with the P-38, I did notice some metallic dust when I was done. This is not ideal. The P-51 left no dust behind. More testing will be done, but in short, this is a P-38 with a bottle-opener and an ice-cream spoon on it. The P-51 is smaller, more comfortable, will get the can opened in fewer cuts, and it does not leave any metal dust behind. If you are looking for a compact can opener to tuck into a wallet, the P-58 is the way to go.</p>
<p dir="auto"><img src="https://i.imgur.com/mzlbdpJ.jpeg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">2 points for punching through.<br />
2 for comfort.<br />
2 for not jamming.<br />
1 for cutting.<br />
2 for not slipping.</p>
<p dir="auto">Total: 9</p>
]]></description><link>https://multitool.ninja/post/2583203</link><guid isPermaLink="true">https://multitool.ninja/post/2583203</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Fri, 07 Aug 2026 13:12:17 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Thu, 11 Jun 2026 11:01:45 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/reamerpunch" aria-label="Profile: ReamerPunch">@<bdi>ReamerPunch</bdi></a> <a href="/post/2575082">said</a>:<br />
GrandHarvest 26-SW</p>
</blockquote>
<p dir="auto">Since I posted the review for that can opener, they changed the item listing pictures.<br />
Before, you could see the can opener clearly not placed correctly on the can.<br />
Now, you can barely see the can and the can opener tip. Still not placed correctly, though.</p>
<p dir="auto"><img src="https://i.imgur.com/sU74EFY.jpeg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2575933</link><guid isPermaLink="true">https://multitool.ninja/post/2575933</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Thu, 11 Jun 2026 11:01:45 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Wed, 03 Jun 2026 10:28:49 GMT]]></title><description><![CDATA[<p dir="auto">Top: Grand Harvest and Bucktool, both tapered and sharpened on the opposite sides of a Leatherman Claw. No wonder they both suck.<br />
Bottom: Leatherman Core and Roxon Flex with claw. Both are sharpened and tapered on the opposite side of Grand Harvest and Buck, and performance is excellent.</p>
<p dir="auto"><img src="https://i.imgur.com/ji1Rois.jpeg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">A claw does not need both bevels to be the same as a Leatherman to make it a good can opener. Wenger is tapered on opposite side of Leatherman claw, but sharpened on the same side.</p>
]]></description><link>https://multitool.ninja/post/2575084</link><guid isPermaLink="true">https://multitool.ninja/post/2575084</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Wed, 03 Jun 2026 10:28:49 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Wed, 03 Jun 2026 10:12:54 GMT]]></title><description><![CDATA[<p dir="auto">GrandHarvest 26-SW</p>
<p dir="auto"><img src="https://i.imgur.com/bULVZ2Y.jpeg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Oh, boy. This is bad. Surprisingly bad, for how good it looked like it would be.</p>
<p dir="auto">0 points for punching through.<br />
0 for comfort.<br />
0 for not jamming.<br />
0 for cutting.<br />
0 for not slipping.</p>
<p dir="auto">Total: 0</p>
<p dir="auto"><img src="https://i.imgur.com/1x5PlHl.jpeg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">This can opener is tapered and sharpened on the opposite sides of the average claw, like the Leatherman or the Roxon modular claw.<br />
Having it be tapered and sharpened on the side that it is, the can opener is very difficult to use, as it wants to follow the orientation of the edge, like a chisel-ground blade. But instead of sinking to the left (away from the rim) as it cuts into the lid, the tip sinks to the right, making the tip scrape against the rim and wall. This, in turn, makes the can opener create metal filings, and it throws off the direction of the cut, making it extremely difficult to follow-up on that cut and advance around the rim.</p>
<p dir="auto"><img src="https://i.imgur.com/tOOMnW3.jpeg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The initial punching through the rim was hard, which is odd. Even the worst can openers so far had a decent first cut. The lid unrolled where the first cut was attempted, making it impossible to continue cutting from there. A second initial cut had to be made. The edge is very well sharpened, so the can opener has no trouble cutting through the lid. The thing, is, it cuts arguably too well. It is so aggressive, that it cuts easily, making it very easy to cut in the wrong direction and throw off the cut orientation.<br />
Comfort is bad. The blade spine dug into my fingers. The entire process was slow, and cumbersome. The can opener slipped and jammed now and then.</p>
<p dir="auto">It is quite disheartening to see this claw look so good but perform so abysmally. If it was ground and sharpened on the opposite sides than it is, to match a Leatherman claw, it would surely be much better. I will give this another chance, maybe make shorter cuts, and place the tip a little ways away from the rim, to hopefully prevent it from scrape against the rim and wall, and make it cut and trace properly.</p>
]]></description><link>https://multitool.ninja/post/2575082</link><guid isPermaLink="true">https://multitool.ninja/post/2575082</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Wed, 03 Jun 2026 10:12:54 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Fri, 08 May 2026 19:47:55 GMT]]></title><description><![CDATA[<p dir="auto">Roxon Flex - claw</p>
<p dir="auto">The first opener Roxon released for the Flex set of modular tools was the quarter circle, but recently they also released a claw.</p>
<p dir="auto"><img src="https://i.imgur.com/FcucqcG.jpeg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">This was a very similar experience to using the Flex with the quarter circle. Of course, the can opener can be placed in any slot of the Flex, as it is modular.<br />
The Flex is very comfortable to hold, with all its rounded edges. No hotspots whatsoever.<br />
Initial piercing was very easy. The claw did not get stuck or slip off the can at any point.<br />
There was no shrapnel left in the can, which is very important. Comfort, speed, getting stuck, these are all important,but what good are they if the food is unsafe to eat once you open the can?<br />
Cutting was easy, much like with a Leatherman claw. There was no need to be mindful of aligning every consecutive cut. Tracing around the lid was effortless.</p>
<p dir="auto"><img src="https://i.imgur.com/5Sm9WwL.jpeg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">It is very interesting that Roxon has two excellent can openers for the Flex set of implements. If you are used to one and prefer it over the other, you can just have that one installed, and if you want to mix things up or try the other style, you can install that one. And they're one-handed as well. Nice.</p>
<p dir="auto"><img src="https://i.imgur.com/YtJa6sv.jpeg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">2 points for punching through.<br />
2 for comfort.<br />
2 for not jamming.<br />
2 for cutting.<br />
2 for not slipping.</p>
<p dir="auto">Total: 10</p>
]]></description><link>https://multitool.ninja/post/2570333</link><guid isPermaLink="true">https://multitool.ninja/post/2570333</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Fri, 08 May 2026 19:47:55 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Fri, 25 Oct 2024 02:45:44 GMT]]></title><description><![CDATA[<p dir="auto">Good info here.  Nice to see Rebar and PST as consistent winners as I have both.  The 91mm Vics sort of go without say.</p>
]]></description><link>https://multitool.ninja/post/2501773</link><guid isPermaLink="true">https://multitool.ninja/post/2501773</guid><dc:creator><![CDATA[ThundahBeagle]]></dc:creator><pubDate>Fri, 25 Oct 2024 02:45:44 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Mon, 21 Oct 2024 19:57:24 GMT]]></title><description><![CDATA[<p dir="auto">SOG PowerPint</p>
<p dir="auto"><img src="https://i.imgur.com/qLjTv3k.jpeg" alt="" class="img-markdown  img-fluid" /><br />
Initial punch through was not bad.<br />
The first three quarters of the can were going ok. I could trace along the rim adequately. The edge is short, and the bevel not that acute. With a Victorinox quarter circle, the edge is cutting along the rim in one continuous, obvious cut. The Pint was an interrupted, one break at a time sort of thing. It never felt smooth between cuts. Every cut felt like an isolated, single step, with the same resistance and force required as the original punching through.<br />
At the exact 3/4 of the rim, the lid was being pushed into the can. The edge could not advance any longer, and just slid sideways along the lid (top right picture, where the opener is pointing). And I even tried going backwards from the end, to join the beginning of the cut to the end, and I could not even pierce the lid anymore.<br />
For comparison, the Flex continued the cut, although with some difficulty.</p>
<p dir="auto">The Rebar started backwards from where the pint started and went through the mangled, bent lid with no issue.<br />
The pint never jammed or slipped off the lid. Ergonomics are not that good with the Pint. I had to exert a lot of force for every single cut. The tool is a little too small to hold comfortably.<br />
To sum up, the Pint may be enough to open a can. It can pierce, it can cut, and it did not leave any shrapnel in the food. If you are planning to open multiple cans maybe take a Rebar or PST or something.</p>
<p dir="auto"><img src="https://i.imgur.com/MRh4Pmy.jpeg" alt="" class="img-markdown  img-fluid" /><br />
1 points for punching through.<br />
0 for comfort.<br />
2 for not jamming.<br />
0 for cutting.<br />
2 for not slipping.</p>
<p dir="auto">Total: 5</p>
]]></description><link>https://multitool.ninja/post/2501267</link><guid isPermaLink="true">https://multitool.ninja/post/2501267</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Mon, 21 Oct 2024 19:57:24 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Thu, 03 Oct 2024 12:40:21 GMT]]></title><description><![CDATA[<p dir="auto">Oh yeah, Leatherman has a quarter-circle opener now. Hmm...</p>
]]></description><link>https://multitool.ninja/post/2499024</link><guid isPermaLink="true">https://multitool.ninja/post/2499024</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Thu, 03 Oct 2024 12:40:21 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Fri, 27 Sep 2024 02:07:49 GMT]]></title><description><![CDATA[<p dir="auto">Found the Leatherman Garage #5 requires a motion of inserting the tab to squishing to the side wall on the cut. Works better.</p>
<p dir="auto">Bought some Victorinox Can Openers and am going to cut the tabs down to fit in the Large Bit Driver for a more proper and useful Can Opener. Am not too crazy about the idea of modifying the Garage #5 just yet.</p>
]]></description><link>https://multitool.ninja/post/2498367</link><guid isPermaLink="true">https://multitool.ninja/post/2498367</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Fri, 27 Sep 2024 02:07:49 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Thu, 26 Sep 2024 21:04:50 GMT]]></title><description><![CDATA[<p dir="auto"><strong>Roxon Flex</strong></p>
<p dir="auto">This is a quarter circle, properly sharpened and at the perfect length to properly engage the can rim.<br />
The tool is modular which means you can place the can opener in any position in the handle, but this does not really matter, thanks to the can opener length.</p>
<p dir="auto">Initial cut was very easy. The tool is extremely comfortable, thanks to all its rounded edges and tools flush with the frame.<br />
The opener did not get stuck between cuts, nor did it slip off the rim. There was no shrapnel in the food at the end, which is nice.<br />
Cutting was excellent and pretty consistent. I found myself mindful of aligning the can opener cutting edge right up to the rim, to get an easy cut,<br />
And trace easily around the rim.</p>
<p dir="auto"><img src="https://i.imgur.com/eJbgJLW.jpeg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">2 points for punching through.<br />
2 for comfort.<br />
2 for not jamming.<br />
2 for cutting.<br />
2 for not slipping.</p>
<p dir="auto">Total: 10</p>
]]></description><link>https://multitool.ninja/post/2498352</link><guid isPermaLink="true">https://multitool.ninja/post/2498352</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Thu, 26 Sep 2024 21:04:50 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Tue, 20 Jul 2021 22:15:55 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/reamerpunch" aria-label="Profile: ReamerPunch">@<bdi>ReamerPunch</bdi></a> <a href="/post/2261461">said</a>:<br />
I started this thread three years ago. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /><br />
And only now did I realize I had not done a list of all the tools I tested. So, here it is. <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f604.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--smile" style="height:1.4em;width:auto;vertical-align:middle" title=":D" alt="😄" /></p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2264353</link><guid isPermaLink="true">https://multitool.ninja/post/2264353</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Tue, 20 Jul 2021 22:15:55 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Mon, 19 Jul 2021 14:38:29 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/mcstitchy" aria-label="Profile: McStitchy">@<bdi>McStitchy</bdi></a> <a href="/post/2255883">said</a>:<br />
Fun indeed, thanks for sharing it  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /><br />
The swivel-around-the-middle ones seem cool!</p>
<p dir="auto">Makes me want to search eBay for vintage can openers now  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">+1</p>
<p dir="auto">It awlso keeps the lid and makes it easier to remove it without risking cutting yourself.</p>
<p dir="auto"><img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2263873</link><guid isPermaLink="true">https://multitool.ninja/post/2263873</guid><dc:creator><![CDATA[pfrsantos]]></dc:creator><pubDate>Mon, 19 Jul 2021 14:38:29 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Sat, 10 Jul 2021 09:33:30 GMT]]></title><description><![CDATA[<p dir="auto">I started this thread three years ago. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /><br />
And only now did I realize I had not done a list of all the tools I tested. So, here it is. <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f604.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--smile" style="height:1.4em;width:auto;vertical-align:middle" title=":D" alt="😄" /></p>
]]></description><link>https://multitool.ninja/post/2261461</link><guid isPermaLink="true">https://multitool.ninja/post/2261461</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Sat, 10 Jul 2021 09:33:30 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Wed, 15 Jul 2026 04:43:45 GMT]]></title><description><![CDATA[<p dir="auto"><strong>Can Openers tested so far:</strong></p>
<p dir="auto"><a href="/post/1728891">Bear &amp; Son Bear Jaws</a><br />
<a href="/post/2050305">Bibury 21 in 1</a></p>
<p dir="auto"><strong>Buck</strong><br />
<a href="/post/1728888">Bucktool (original attempt)</a><br />
<a href="/post/1732423">BuckTool (left-handed - anticlockwise)</a><br />
<a href="/post/1756991">BuckTool (right-handed - anticlockwise)</a><br />
<a href="/post/1757027">BuckTool (left-handed - anticlockwise - second attempt)</a><br />
<a href="/post/1759761">BuckTool (right-handed - clockwise - whole can)</a></p>
<p dir="auto"><a href="/post/1728893">Coast Pocket PaperWeight</a><br />
<a href="/post/1753379">Coast Pocket PaperWeight (second attempt)</a><br />
<a href="/post/1728891">Craftright (Generic Suspension clone)</a><br />
<a href="/post/1728885">Ganzo G302-B</a><br />
<a href="/post/2053564">Grand Harvest K2</a><br />
<a href="/post/2056351">Grand Harvest K2 (left-handed)</a><br />
<a href="/post/2161020">Grand Harvest K6</a><br />
<a href="/post/2575082">Grand Harvest 26-SW</a></p>
<p dir="auto"><strong>Gerber</strong><br />
<a href="/post/2180092">Flik</a><br />
<a href="/post/1728885">MP400</a><br />
<a href="/post/1736668">MP400 (second attempt)</a><br />
<a href="/post/2074629">Multi-Plier</a></p>
<p dir="auto"><a href="/post/2162011">K-7375</a></p>
<p dir="auto"><strong>Leatherman</strong><br />
<a href="/post/1728880">Charge AL</a><br />
<a href="/post/1728893">Juice CS4</a><br />
<a href="/post/1816538">Juice CS4 (second attempt)</a><br />
<a href="/post/1728893">MiniTool</a><br />
<a href="/post/1731584">PST</a><br />
<a href="/post/1730404">Rebar</a><br />
<a href="/post/1734348">Sideclip</a><br />
<a href="/post/1733510">Signal</a><br />
(/post/1731584)<br />
<a href="/post/1734348">Surge</a><br />
<a href="/post/1762907">Wave Plus</a><br />
<a href="/post/1768345">Wave Plus (different grip)</a><br />
<a href="/post/1730404">Wingman</a></p>
<p dir="auto"><a href="/post/2032530">NexTool Flagship Pro</a><br />
<a href="/post/2144638">NexTool Mini Flagship</a><br />
<a href="/post/2158648">Ozark Trail Multiforce</a><br />
<a href="/post/2259271">P-38</a><br />
<a href="/post/2259272">P-51</a></p>
<p dir="auto"><strong>Roxon</strong><br />
<a href="/post/2170188">Flash S803</a><br />
<a href="/post/2570333">Flex (claw)</a><br />
<a href="/post/2498352">Flex (quartercircle)</a><br />
<a href="/post/2146063">Phantom S802</a><br />
<a href="/post/1728880">Storm S801 (default)</a><br />
<a href="/post/1728880">Storm S801 (modded)</a><br />
<a href="/post/2037286">Storm S801S</a></p>
<p dir="auto"><a href="/post/1728888">Schrade USA ToughTool</a><br />
<a href="/post/1761548">Schrade USA ToughTool (second attempt)</a><br />
<a href="/post/1731589">Sheffield 10 in 1</a><br />
<a href="/post/1728893">SOG Pocket Power Plier</a><br />
<a href="/post/1731589">SOG Powerlock</a><br />
<a href="/post/2501267">SOG PowerPint</a></p>
<p dir="auto"><strong>Victorinox</strong><br />
<a href="/post/1731589">Bantam</a><br />
<a href="/post/1732426">Cadet</a><br />
<a href="/post/1728880">Deluxe Tinker</a><br />
<a href="/post/1736652">Deluxe Tinker (second attempt)</a><br />
<a href="/post/1732426">Farmer</a><br />
<a href="/post/1744398">Farmer (second attempt)</a><br />
<a href="/post/1733519">Fireman (liner-lock version)</a><br />
<a href="/post/1744394">Fireman (liner-lock version - second attempt)</a><br />
<a href="/post/1734349">Hercules (slide-lick version)</a><br />
<a href="/post/1733519">OHO Trekker (liner-lock version)</a><br />
<a href="/post/1744394">OHO Trekker (liner-lock version - second attempt)</a><br />
<a href="/post/1734349">RangerGrip 79</a><br />
<a href="/post/1730404">Safari Hunter</a><br />
<a href="/post/1728891">Spirit</a><br />
<a href="/post/1736668">Spirit (second attempt)</a><br />
<a href="/post/1744398">Sportsman</a><br />
<a href="/post/1728885">SwissChamp</a><br />
<a href="/post/1736652">SwissChamp (second attempt)</a></p>
<p dir="auto"><strong>Wenger</strong><br />
<a href="/post/1728888">Highlander</a><br />
<a href="/post/1732423">Highlander (second attempt)</a><br />
<a href="/post/1730409">Ranger 06 - Mountaineer </a><br />
<a href="/post/1733510">Ranger 06 - Mountaineer (second attempt)</a><br />
<a href="/post/1731584">RangerGrip 60</a></p>
<p dir="auto"><a href="/post/1730409">Workpro 10 in 1</a></p>
]]></description><link>https://multitool.ninja/post/2261460</link><guid isPermaLink="true">https://multitool.ninja/post/2261460</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Wed, 15 Jul 2026 04:43:45 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Fri, 02 Jul 2021 16:52:59 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/reamerpunch" aria-label="Profile: ReamerPunch">@<bdi>ReamerPunch</bdi></a> <a href="/post/2259308">said</a>:<br />
"which positions both at the perfect position."</p>
<p dir="auto">I should become a columnist or something. <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">You do a great job. I avoid long commentary because I would make and miss many more verbal blunders.</p>
]]></description><link>https://multitool.ninja/post/2259418</link><guid isPermaLink="true">https://multitool.ninja/post/2259418</guid><dc:creator><![CDATA[Adam5]]></dc:creator><pubDate>Fri, 02 Jul 2021 16:52:59 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Fri, 02 Jul 2021 16:30:02 GMT]]></title><description><![CDATA[<p dir="auto">Another great video on pocket knife can openers.<br />
<a href="https://www.youtube.com/watch?v=qZzebR4AGzY" rel="nofollow ugc">https://www.youtube.com/watch?v=qZzebR4AGzY</a></p>
]]></description><link>https://multitool.ninja/post/2259416</link><guid isPermaLink="true">https://multitool.ninja/post/2259416</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Fri, 02 Jul 2021 16:30:02 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Fri, 02 Jul 2021 14:21:34 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nix" aria-label="Profile: Nix">@<bdi>Nix</bdi></a> <a href="/post/2259346">said</a>:<br />
<img src="/assets/uploads/smileys/agreesign.gif" alt=":iagree:" title="I agree" class="forum-smiley emoji" />  Nice work, RP!</p>
</blockquote>
<p dir="auto">Thanks for the can openers! <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2259368</link><guid isPermaLink="true">https://multitool.ninja/post/2259368</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Fri, 02 Jul 2021 14:21:34 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Fri, 02 Jul 2021 12:33:22 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/mcstitchy" aria-label="Profile: McStitchy">@<bdi>McStitchy</bdi></a> <a href="/post/2259278">said</a>:<br />
I think this thread would be incomplete without them.</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/agreesign.gif" alt=":iagree:" title="I agree" class="forum-smiley emoji" />  Nice work, RP!</p>
]]></description><link>https://multitool.ninja/post/2259346</link><guid isPermaLink="true">https://multitool.ninja/post/2259346</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Fri, 02 Jul 2021 12:33:22 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Fri, 02 Jul 2021 10:33:24 GMT]]></title><description><![CDATA[<p dir="auto">Yeah....ok... I'll get some  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f604.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--smile" style="height:1.4em;width:auto;vertical-align:middle" title=":D" alt="😄" /><br />
Will try to source them locally first.</p>
]]></description><link>https://multitool.ninja/post/2259314</link><guid isPermaLink="true">https://multitool.ninja/post/2259314</guid><dc:creator><![CDATA[McStitchy]]></dc:creator><pubDate>Fri, 02 Jul 2021 10:33:24 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Fri, 02 Jul 2021 10:17:04 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/mcstitchy" aria-label="Profile: McStitchy">@<bdi>McStitchy</bdi></a> <a href="/post/2259278">said</a>:<br />
I was looking forward for you testing them RP  <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /> I think this thread would be incomplete without thwm.</p>
<p dir="auto">Excellent results for such a "simplistic" design  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I love the design. How can something this small be designed so well for its purpose, and perform so well? Does your multi-tool not have a can opener? Slip a P-51 in the sheath and you're set. <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2259310</link><guid isPermaLink="true">https://multitool.ninja/post/2259310</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Fri, 02 Jul 2021 10:17:04 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Fri, 02 Jul 2021 10:05:12 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/reamerpunch" aria-label="Profile: ReamerPunch">@<bdi>ReamerPunch</bdi></a> <a href="/post/2259271">said</a>:<br />
which positions both at the perfect position.</p>
</blockquote>
<p dir="auto">I should become a columnist or something. <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2259308</link><guid isPermaLink="true">https://multitool.ninja/post/2259308</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Fri, 02 Jul 2021 10:05:12 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Fri, 02 Jul 2021 06:46:35 GMT]]></title><description><![CDATA[<p dir="auto">I was looking forward for you testing them RP  <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /> I think this thread would be incomplete without thwm.</p>
<p dir="auto">Excellent results for such a "simplistic" design  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2259278</link><guid isPermaLink="true">https://multitool.ninja/post/2259278</guid><dc:creator><![CDATA[McStitchy]]></dc:creator><pubDate>Fri, 02 Jul 2021 06:46:35 GMT</pubDate></item><item><title><![CDATA[Reply to Can Opener Comparison on Fri, 02 Jul 2021 05:51:04 GMT]]></title><description><![CDATA[<p dir="auto">P-51</p>
<p dir="auto"><img src="https://i.imgur.com/mAXCjiN.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The big brother of the P-38, longer, thicker, heavier. Using this was a very similar experience to the P-38.<br />
Piercing was extremely easy. The shapes and angles are the same, and this also engages the can perfectly. No slipping, no jamming, and still sitting in place when you let go.</p>
<p dir="auto"><img src="https://i.imgur.com/Ca6QNax.jpg" alt="" class="img-markdown  img-fluid" /><br />
This was a little more comfortable. It is longer, and I got a better grip, and thanks to the blade being slightly longer, I got longer individual cuts. The difference in leverage is very noticeable and much more than anticipated. After only a couple of cuts, the action felt intuitive and I was able to cut the rid faster than any other can opener I have tested. Speed was not taken into account when using can openers for this thread, but the P-51 would be the winner. While extremely fast, the cut was consistent, easy, it never slipped or got jammed, or advanced off kilter. Most importantly, there were no metal shavings of any sort with this. It left behind a clean edge, less jagged than that of the P-38.</p>
<p dir="auto">It may be heavier and larger than the P-38, but the difference in performance was very noticeable. It is still small enough for all sorts of kits, and certainly a fantastic companion to any multi-tools that lack a can opener or have a mediocre or unusable one.<br />
I can not wait to open a can with this again. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
<p dir="auto">2 points for punching through.<br />
2 for comfort.<br />
2 for not jamming.<br />
2 for cutting.<br />
2 for not slipping.</p>
<p dir="auto">Total: 10</p>
]]></description><link>https://multitool.ninja/post/2259272</link><guid isPermaLink="true">https://multitool.ninja/post/2259272</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Fri, 02 Jul 2021 05:51:04 GMT</pubDate></item></channel></rss>