<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[91mm SAK mod 'Mountain Tinker']]></title><description><![CDATA[<p dir="auto">Hi, all.</p>
<p dir="auto">Backspring "<strong>Corkscrew vs Phillips</strong>" is an endless debate for all 91mm SAK enthusiasts, how about having both at the same time? :D</p>
<p dir="auto"><strong>Mountain Tinker</strong><br />
<img src="https://i.imgur.com/651SPGi.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">This is the very first mod I made after my initial post "<a href="/topic/81506">Gathering thoughts/tools/materials for first mod</a>" and I'd like to share with you what I've learnt as a newbie.  My special thanks to D_T and Vidar, for your patience and sharing of all things machining/modding, this mod is dedicated to you two! <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" />   And also a big thank you for hiraethus, for sourcing the brass rods, it won't be possible without all of you! <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
<p dir="auto"><strong>Executive Summary</strong>: To replace the Victorinox 91mm Mountaineer's backside awl/hook with a 91mm Tinker backside Phillips driver.</p>
<p dir="auto"><strong>Materials needed</strong>: 1 SAK 91mm Mountaineer, 1 91mm Tinker, few 0.3mm-0.4mm thick 2.5mm(inner hole diameter) spacer.</p>
<p dir="auto"><img src="https://i.imgur.com/iFe0vyW.jpg" alt="" class="img-markdown  img-fluid" /><br />
I used a used 91mm SAK Mountaineer as my base for this mod, which is one of my all time favorites for EDC.  First off, I used steel wool to clean up the old metal file before the mod.</p>
<p dir="auto">Getting the scale off is easy.  I soaked the entire SAK into a glass of boiling(really) hot water for 3 min(not in the pot on fire/stove, where the bottom will be more than 100C, but in a glass), lift it up by the lanyard ring, then quickly insert a very small flathead into the toothpick to lift up the scale and proceed to peel the entire scale off with a small SAK blade as fast as I can.  The trick here is don't hesitate and act fast, or else the scale may cool down and it might be wrapped.  I placed heavy box on top of the scales once off, to keep them straight during the cool down.(Thanks to Jaya for the details, good points!)</p>
<p dir="auto"><img src="https://i.imgur.com/t8N75he.jpg" alt="" class="img-markdown  img-fluid" /><br />
If there is anything I learnt in this mod, is that having all the right tools is half the battle won.  You don't need everything, but some essential tools and patience are must for a good perfect mod.(I will list out what I think are essential/nice to have to a newbie in the end)</p>
<p dir="auto"><img src="https://i.imgur.com/f25LEok.jpg" alt="" class="img-markdown  img-fluid" /><br />
I center-punch each of the rivets with a manual punch.  I tried auto center punch, maybe what I get is a crappy one or I'm no good at it, the slack inside the punch/little skidding just when you are pressing down on the auto punch will make the dent completely off center.  The manual punch, on the other hand, is rather accurate and reliable.  This process is important, because you may damage the rivet bushing otherwise, and you will need that if you are going to put scales back on. :o</p>
<p dir="auto"><img src="https://i.imgur.com/VsoxnuU.jpg" alt="" class="img-markdown  img-fluid" /><br />
A drill press is absolutely awesome, so far I had practiced peening and disassembly a few times, and the drill press makes the whole process very consistent and prevent any damage to the rivet bushing.  I've used 2.5mm and 2mm cobalt drill bits for drilling out the rivets on 91mm SAK.</p>
<p dir="auto"><img src="https://i.imgur.com/jxAIy7w.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://i.imgur.com/nVzO340.jpg" alt="" class="img-markdown  img-fluid" /><br />
Once I made the initial hole at the rivet, I proceed to using dremel to thin out whatever left of the rivet inside the bushing.  Then I carefully lift off the bushing with a flush cut pliers.  (Thanks to Jaya for reminding me, another way is to drill enough of the material out, then use the punch to punch it thru)</p>
<p dir="auto"><img src="https://i.imgur.com/eNcQvN8.jpg" alt="" class="img-markdown  img-fluid" /><br />
Next I used a 1.5mm and 2mm punch to punch out the rivet/pivot.  This is where a wood jig comes in very handy.  The jig is the first thing I build even before dissembling the first SAK.  The four holes on the wood doesn't have to be perfect, but need to be large enough to house the rivets and bushing and keep the SAK flat for drilling/punching.  So as I punch out the pivots, the bushing/pivot/rivet will fall thru into the jig underneath.  Notice the tape around the SAK, this really helps prevent the tools explode out when the pivots are being punched out.</p>
<p dir="auto"><img src="https://i.imgur.com/fTVtJG2.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://i.imgur.com/yFfgAJr.jpg" alt="" class="img-markdown  img-fluid" /><br />
91mm Mountaineer "exploded view".  It is up to you how you'd like to punch out pivots, I recommend layer by layer, so you get a chance to resemble the layer and take photograph as you go.<br />
Now is a good time to make measurements of all the tool layers and take notes.</p>
<p dir="auto"><img src="https://i.imgur.com/lrjYHib.jpg" alt="" class="img-markdown  img-fluid" /><br />
Onto the main feature of this post, there are probably a few ways to fit in a back spring phillips simultaneously with corkscrew.  AimlessWanderer's Mega84 dual blade layers or Syph's thinned out phillips are both good in this <a href="/topic/61654">post</a>, also there are more discussion in this thread <a href="/post/1176653">here</a>.</p>
<p dir="auto">My way is try to replace the Awl/Hook on a 91mm with the back spring phillips.  I first fit in the backside phillips driver instead of the awl into the "openers" layer(no mod required on the phillips).  The reason of replacing the awl, instead of the hook, is because the strong similarity of their tangs.  However, the backspring phillips is thicker, so I put in <strong>0.3mm spacers</strong> onto other three pivots to fill the gap and avoid side play.</p>
<p dir="auto">Could the phillips replace the hook in the scissors layer?  Maybe, but there is a fair chance it can't stand straight since there is not enough material to push against the scissors backspring. <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="https://i.imgur.com/BX9iUu3.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://i.imgur.com/B5xapQr.jpg" alt="" class="img-markdown  img-fluid" /><br />
<strong>One of the two things needed modding is the openers liner</strong>.  Here I use a dremel and 'stock removal' method to cut an opening to fit in the phillips.  Notice, this opening is NOT the same opening as the blade/corkscrew liner.  The backspring of the scissors is slanted, so beware how much you cut or it might not be as 'pretty'.</p>
<p dir="auto"><img src="https://i.imgur.com/od7QvzJ.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://i.imgur.com/iZWEGjj.jpg" alt="" class="img-markdown  img-fluid" /><br />
This is the patient part, use dremel/file/sandpaper to give just the space necessary for the phillips to rest at the back.</p>
<p dir="auto"><img src="https://i.imgur.com/unMAI6G.jpg" alt="" class="img-markdown  img-fluid" /><br />
<strong>The second part needs modding is the hook.</strong>  Just cut it off to give space to the phillips, its a no brainer.  But it needs to be there otherwise there is no support to the scissors backspring.</p>
<p dir="auto"><img src="https://i.imgur.com/WPOH2tz.jpg" alt="" class="img-markdown  img-fluid" /><br />
After putting on other layers, finally put on the bushings.  Do be very careful, there are four pivots in a 91mm SAK, only 3 needs bushing(2 2.5mm ones, and the floating pin 2.25mm).  And do be careful, the two 2.5mm pivots needs the bigger rivet bushing, and the remaining 2.25mm pivot needs the smaller rivet bushing.  I left only 0.5-0.7mm material on each side of the bushings, and it peens perfectly.</p>
<p dir="auto"><img src="https://i.imgur.com/4fBCKpj.jpg" alt="" class="img-markdown  img-fluid" /><br />
Giving the mod translucent scale, here I use sponge vise cover or leather to protect scales from marring.</p>
<p dir="auto"><img src="https://i.imgur.com/UFaEEB5.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://i.imgur.com/3RY7VAw.jpg" alt="" class="img-markdown  img-fluid" /><br />
Different close up and photo for reference, notice the 0.3mm spacers at the openers layer to avoid side play.</p>
<p dir="auto"><img src="https://i.imgur.com/qebRjxn.jpg" alt="" class="img-markdown  img-fluid" /><br />
One last look at the back side, in comparison to the awl/hook.  The phillips won't be completely flat against the chassis, but the slight slanted angle is just perfect for fitting my finger in to lift it up.  In fact, it's less noticeable than the corkscrew.</p>
<p dir="auto"><strong>What I think is essential tools for making this mod</strong>:<br />
Drill<br />
2 and 2.5mm drill bits<br />
Center Punch<br />
Jig(debatable, but it just make life so so much easier, can't imagine without it)<br />
Tape<br />
File<br />
Saw(to mod the liner)<br />
Sand paper</p>
<p dir="auto"><strong>Nice to have tools</strong>:<br />
Drill press<br />
Dremel + diamond cutoff disk(for quick liner/hook modding)<br />
Dental pick(or something similar to pull the springs back to install the layers)</p>
<p dir="auto"><img src="https://i.imgur.com/c8VS9GH.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>Thank you for reading!</strong>  I will be making more mods based on the SAK 91mm Mountaineer in the near future, please stay tuned!  <img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/topic/82166/91mm-sak-mod-mountain-tinker</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 16:30:12 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/82166.rss" rel="self" type="application/rss+xml"/><pubDate>Sat, 13 Jul 2019 14:45:50 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Sun, 18 Apr 2021 01:48:25 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /> :D</p>
]]></description><link>https://multitool.ninja/post/2233690</link><guid isPermaLink="true">https://multitool.ninja/post/2233690</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Sun, 18 Apr 2021 01:48:25 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Sun, 18 Apr 2021 00:45:10 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
<p dir="auto">Great pictures of the whole process.</p>
]]></description><link>https://multitool.ninja/post/2233684</link><guid isPermaLink="true">https://multitool.ninja/post/2233684</guid><dc:creator><![CDATA[King_Gorilla]]></dc:creator><pubDate>Sun, 18 Apr 2021 00:45:10 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Sat, 17 Apr 2021 04:16:05 GMT]]></title><description><![CDATA[<p dir="auto">Nice work. Clear, helpful, and inspiring.</p>
]]></description><link>https://multitool.ninja/post/2233457</link><guid isPermaLink="true">https://multitool.ninja/post/2233457</guid><dc:creator><![CDATA[xfrench]]></dc:creator><pubDate>Sat, 17 Apr 2021 04:16:05 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Tue, 27 Aug 2019 19:59:46 GMT]]></title><description><![CDATA[<p dir="auto">Glad it helped  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2000093</link><guid isPermaLink="true">https://multitool.ninja/post/2000093</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Tue, 27 Aug 2019 19:59:46 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Tue, 27 Aug 2019 15:03:11 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/aimlesswanderer" aria-label="Profile: AimlessWanderer">@<bdi>AimlessWanderer</bdi></a> <a href="/post/1999479">said</a>:<br />
I did something similar quite a while ago, with my Mega84, and it's great having both corkscrew and driver on the back.</p>
<p dir="auto">Nice work  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Aw, I remembered seeing that while researching, thanks to you and many others whom have generously contributed, enabling more folks to join this fun hobby! <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1999916</link><guid isPermaLink="true">https://multitool.ninja/post/1999916</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Tue, 27 Aug 2019 15:03:11 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Mon, 26 Aug 2019 21:21:54 GMT]]></title><description><![CDATA[<p dir="auto">I did something similar quite a while ago, with my Mega84, and it's great having both corkscrew and driver on the back.</p>
<p dir="auto">Nice work  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/448647_IMG_20170507_113652_edit_800_600.jpg" alt="IMG_20170507_113652_edit_800_600.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1999479</link><guid isPermaLink="true">https://multitool.ninja/post/1999479</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Mon, 26 Aug 2019 21:21:54 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Mon, 26 Aug 2019 18:44:43 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/rapidray" aria-label="Profile: Rapidray">@<bdi>Rapidray</bdi></a> <a href="/post/1998402">said</a>:<br />
This is a great mod. The ideal of having both the corkscrew and the Phillips on the back side is great! Surprised Victorinox had not already done it! Great name for it by the way!  <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Thank you for the kind words! <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1999389</link><guid isPermaLink="true">https://multitool.ninja/post/1999389</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Mon, 26 Aug 2019 18:44:43 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Sun, 25 Aug 2019 12:35:31 GMT]]></title><description><![CDATA[<p dir="auto">This is a great mod. The ideal of having both the corkscrew and the Phillips on the back side is great! Surprised Victorinox had not already done it! Great name for it by the way!  <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1998402</link><guid isPermaLink="true">https://multitool.ninja/post/1998402</guid><dc:creator><![CDATA[Rapidray]]></dc:creator><pubDate>Sun, 25 Aug 2019 12:35:31 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Tue, 06 Aug 2019 02:39:43 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/stevec" aria-label="Profile: SteveC">@<bdi>SteveC</bdi></a> <a href="/post/1987381">said</a>:<br />
Nice work comis !    <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Thanks, Steve! <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1987737</link><guid isPermaLink="true">https://multitool.ninja/post/1987737</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Tue, 06 Aug 2019 02:39:43 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Mon, 05 Aug 2019 14:22:09 GMT]]></title><description><![CDATA[<p dir="auto">Nice work comis !    <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1987381</link><guid isPermaLink="true">https://multitool.ninja/post/1987381</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Mon, 05 Aug 2019 14:22:09 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Mon, 05 Aug 2019 14:10:10 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ddogu" aria-label="Profile: ddogu">@<bdi>ddogu</bdi></a> <a href="/post/1986983">said</a>:<br />
Beautiful! And thank you for sharing the details  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Thanks for reading!  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sirvicalot" aria-label="Profile: SirVicaLot">@<bdi>SirVicaLot</bdi></a> <a href="/post/1987148">said</a>:<br />
I know my skills with a hand drill. Unfortunately I could not hold it straight if my life depended on it. I would just damage the bushing  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /> I have a broken SAK laying around, maybe I do a test run on that to see how it would work  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1987365</link><guid isPermaLink="true">https://multitool.ninja/post/1987365</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Mon, 05 Aug 2019 14:10:10 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Sun, 04 Aug 2019 22:51:09 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/comis" aria-label="Profile: comis">@<bdi>comis</bdi></a> <a href="/post/1985400">said</a>:<br />
Actually, a drill press will be really nice to have to do a clean job, but I do agree with most folks that you don't actually need one to do a 91mm mod.  A dremel or hand drill will actually be suffice. :D</p>
</blockquote>
<p dir="auto">I know my skills with a hand drill. Unfortunately I could not hold it straight if my life depended on it. I would just damage the bushing  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /> I have a broken SAK laying around, maybe I do a test run on that to see how it would work  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1987148</link><guid isPermaLink="true">https://multitool.ninja/post/1987148</guid><dc:creator><![CDATA[SirVicaLot]]></dc:creator><pubDate>Sun, 04 Aug 2019 22:51:09 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Sun, 04 Aug 2019 17:26:40 GMT]]></title><description><![CDATA[<p dir="auto">Beautiful! And thank you for sharing the details  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1986983</link><guid isPermaLink="true">https://multitool.ninja/post/1986983</guid><dc:creator><![CDATA[ddogu]]></dc:creator><pubDate>Sun, 04 Aug 2019 17:26:40 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Sun, 04 Aug 2019 12:17:03 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/magentus" aria-label="Profile: magentus">@<bdi>magentus</bdi></a> <a href="/post/1986722">said</a>:<br />
<img src="/assets/uploads/smileys/clapping.gif" alt=":clap:" title="Clapping" class="forum-smiley emoji" /> Lovely mod! Great pics too.  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Thanks, Mag!  Just giving back a little to the community, I learnt a lot from all of you! <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /> :D</p>
]]></description><link>https://multitool.ninja/post/1986781</link><guid isPermaLink="true">https://multitool.ninja/post/1986781</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Sun, 04 Aug 2019 12:17:03 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Sun, 04 Aug 2019 09:58:00 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/clapping.gif" alt=":clap:" title="Clapping" class="forum-smiley emoji" /> Lovely mod! Great pics too.  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1986722</link><guid isPermaLink="true">https://multitool.ninja/post/1986722</guid><dc:creator><![CDATA[magentus]]></dc:creator><pubDate>Sun, 04 Aug 2019 09:58:00 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Fri, 02 Aug 2019 04:45:31 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sirvicalot" aria-label="Profile: SirVicaLot">@<bdi>SirVicaLot</bdi></a> <a href="/post/1985389">said</a>:<br />
Nice write-up comis!  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> This will come in handy should I ever have access to a drill press.</p>
</blockquote>
<p dir="auto">Actually, a drill press will be really nice to have to do a clean job, but I do agree with most folks that you don't actually need one to do a 91mm mod.  A dremel or hand drill will actually be suffice. :D</p>
]]></description><link>https://multitool.ninja/post/1985400</link><guid isPermaLink="true">https://multitool.ninja/post/1985400</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Fri, 02 Aug 2019 04:45:31 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Fri, 02 Aug 2019 03:27:39 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/mike" aria-label="Profile: Mike">@<bdi>Mike</bdi></a> 56 <a href="/post/1985207">said</a>:<br />
comis, I liked your mod so much I modded one for myself. I did not add the file to mine so I guess mine is a Climber/Super Tinker.<br />
Thank you for the great mod!</p>
<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20190801/f34fe5027d51cafdaa96f3250541f3fb.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Sent from my iPhone using Tapatalk</p>
</blockquote>
<p dir="auto">That's awesome!  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> :D</p>
]]></description><link>https://multitool.ninja/post/1985399</link><guid isPermaLink="true">https://multitool.ninja/post/1985399</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Fri, 02 Aug 2019 03:27:39 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Fri, 02 Aug 2019 02:17:22 GMT]]></title><description><![CDATA[<p dir="auto">Nice write-up comis!  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> This will come in handy should I ever have access to a drill press.</p>
]]></description><link>https://multitool.ninja/post/1985389</link><guid isPermaLink="true">https://multitool.ninja/post/1985389</guid><dc:creator><![CDATA[SirVicaLot]]></dc:creator><pubDate>Fri, 02 Aug 2019 02:17:22 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Thu, 01 Aug 2019 20:28:38 GMT]]></title><description><![CDATA[<p dir="auto">comis, I liked your mod so much I modded one for myself. I did not add the file to mine so I guess mine is a Climber/Super Tinker.<br />
Thank you for the great mod!</p>
<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20190801/f34fe5027d51cafdaa96f3250541f3fb.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Sent from my iPhone using Tapatalk</p>
]]></description><link>https://multitool.ninja/post/1985207</link><guid isPermaLink="true">https://multitool.ninja/post/1985207</guid><dc:creator><![CDATA[Mike 56]]></dc:creator><pubDate>Thu, 01 Aug 2019 20:28:38 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Mon, 15 Jul 2019 01:55:17 GMT]]></title><description><![CDATA[<p dir="auto">I just realized I've forgotten to put in hammer as essential tools! <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
<p dir="auto">I used a few hammers to peen and punch out the pivots.</p>
<p dir="auto">The heavier 500g/17oz hammer is only used to punch out the pivot with a center punch, layer by layer, and I carefully monitored the shape of the pivot as I was punching them out.  Any deformation of the pivot may marr the liner holes or get stuck and warp the liner, so I would try to file away any debris/deformation before punching them.</p>
<p dir="auto">I got a 3.5oz(100g) and 5oz(150g) hammer, and I used them changeably for peening the 91mm.  I practiced a few times on beater 91 and 93mm before attempting this mod, just to get a feel on how to peen.  I know some folks here have some mad peening skill, but my newbie two cents worth are:</p>
<ol>
<li>
<p dir="auto">For smooth, flat installation of 91mm scales, we will probably need the rivet be completely flat and smooth on top of the bushing(pls see your bushings and take pictures before taking them apart).  But no worries, 91mm peening is much, much easier than 93mm peening.</p>
</li>
<li>
<p dir="auto">Ball peen hammer will 'move' the material, sort of expand the surface material, and give the appearance of 'dome' shape of the rivet.  We don't really need that in 91mm per se since we need the rivet to be totally smooth within the bushing, but I do use ball peen anyway to 'fill up' the top of the bushings.</p>
</li>
<li>
<p dir="auto">Flatter the ball peen/hammer face, smoother the hit on the rivet, and vice versa.  If you use a small ball peen hammer with a really round ball peen, that obviously will leave a very visible 'dent' on the face of the rivet(part of the reason why ball peen will 'expand' the material).  So for 91mm, you could basically get away with even using a flat face hammer.</p>
</li>
<li>
<p dir="auto">With my 93mm peening practice, I know there is this balance/sweet spot we want to get to--On one hand, I would want to use flatter ball peen/flat face hammer to smooth the appearance, but that won't give the dome shape and flat face may hurt the aluminum scale easier.  On the other hand, there is a tendency to try to use a really small round ball peen to avoid hitting the scale, but that would expend the surface quickly, and the edge of the dome may become too thin, and as you hammer the pivot down into the rivet, and eventually get so thin that it may even start to 'crack' at the edge as it touches the scale.</p>
</li>
</ol>
<p dir="auto">That's probably one of the reason why 93mm peening is difficult, how much length left for the optimal shape/function, what technique, etc.  I am still too new and not successfully enough to make any real contribution here, but that's another story for another time.  If anyone whom have done it in the past, please do feel free to chime in!  <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
<ol start="5">
<li>I know some modder like to use a punch at the end of the process to ensure the material fit up the rivet bushing nicely.  That is subjective, but if you felt there is not enough material inside the bushing to form a effective rivet, then I guess this is a good way to help.</li>
</ol>
<p dir="auto">Thanks for reading again! <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1970598</link><guid isPermaLink="true">https://multitool.ninja/post/1970598</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Mon, 15 Jul 2019 01:55:17 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Mon, 15 Jul 2019 01:03:56 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/jph-777" aria-label="Profile: jph_777">@<bdi>jph_777</bdi></a> <a href="/post/1970260">said</a>:<br />
Very nice tutorial, Comis.  Thanks for your contributions!  This is a very cool mod. <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Thanks, jph!  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1970582</link><guid isPermaLink="true">https://multitool.ninja/post/1970582</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Mon, 15 Jul 2019 01:03:56 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Sun, 14 Jul 2019 16:22:52 GMT]]></title><description><![CDATA[<p dir="auto">Very nice tutorial, Comis.  Thanks for your contributions!  This is a very cool mod. <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1970260</link><guid isPermaLink="true">https://multitool.ninja/post/1970260</guid><dc:creator><![CDATA[jph_777]]></dc:creator><pubDate>Sun, 14 Jul 2019 16:22:52 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Sun, 14 Jul 2019 05:18:15 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/pomsbz" aria-label="Profile: pomsbz">@<bdi>pomsbz</bdi></a> <a href="/post/1969611">said</a>:<br />
Very nice indeed and very professional!</p>
</blockquote>
<p dir="auto">Thank you!  I am probably no where near the pro level of stuff, but I'd take my time and enjoy every steps of the way! :D</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/finixnover" aria-label="Profile: FInixNOver">@<bdi>FInixNOver</bdi></a> <a href="/post/1969723">said</a>:<br />
Nice work! It looks great!!<br />
<img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">Sent from my Redmi Note 5</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1969916</link><guid isPermaLink="true">https://multitool.ninja/post/1969916</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Sun, 14 Jul 2019 05:18:15 GMT</pubDate></item><item><title><![CDATA[Reply to 91mm SAK mod 'Mountain Tinker' on Sun, 14 Jul 2019 05:15:59 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/jaya-man" aria-label="Profile: jaya_man">@<bdi>jaya_man</bdi></a> <a href="/post/1969478">said</a>:<br />
My pleasure comis... just keeping the MTO spirit alive... All the things I learned about modding SAKs I got here in MTO... only appropriate to pass it along to others as well...</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> I'd read some of your posts in the past, and thank you for sharing too!  It is essentially what makes MTO great.</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sos24" aria-label="Profile: Sos24">@<bdi>Sos24</bdi></a> <a href="/post/1969553">said</a>:<br />
Thanks for sharing your experience.</p>
</blockquote>
<p dir="auto">Thanks for reading! <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1969915</link><guid isPermaLink="true">https://multitool.ninja/post/1969915</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Sun, 14 Jul 2019 05:15:59 GMT</pubDate></item></channel></rss>