<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Becker Knives]]></title><description><![CDATA[<p dir="auto">I am a huge fan. These are tank-tough knives made for hard outdoors use...and believe me, I have used mine hard.</p>
<p dir="auto">I posted this previously on the Becker forum:</p>
<p dir="auto">Using these knives extensively in the outdoors, I have made some great discoveries. Some are obvious, others I gladly learned through my own use of these wonderful knives.</p>
<ol>
<li>
<p dir="auto">I don't need the latest super steel - in fact, for chopping, batoning and other hard uses, 1095 is EXACTLY what I need.</p>
</li>
<li>
<p dir="auto">Carbon steel works just fine - My rust worries were mostly unfounded...the more I used my knife, the more the patina seemed to protect it. Add to that the oils from food prep and maintenance, and it does just fine.</p>
</li>
<li>
<p dir="auto">Field maintenance...especially sharpening, is going to be a necessary "evil" - I found out that damaged edges might happen (see number 4) and having a blade you can actually resharpen fairly easily is important.</p>
</li>
<li>
<p dir="auto">With Beckers, I find myself confident enough to do things I might not with another knife. Although I never recommend outright abuse, I decided pushing it in a non-life threatening scenario was better than finding out the hard way that your equipment is not up to task. I have used my BK9 to chop, baton, pry and even dig. I accidentally chopped into a rock once but was surprised what little edge damage there was. I was able to get it back into shape fairly easy where many blades would have chipped, seen a lot more edge damage, or would have been difficult to sharpen.</p>
</li>
<li>
<p dir="auto">I do not need a Rockwell hardness akin to diamonds, adamantium or Mjolnir to get the job done - There are other factors besides just how hard the steel is that determines how useful a knife is to me. Yeah, I don't want some pot steel softy in the field...Becker knives work perfectly for me.</p>
</li>
<li>
<p dir="auto">Edge geometry - I have owned knives that I thought would be perfect, only to find the thickness behind the edge was just not practical for delicate tasks...nor do you want an edge that is too thin. I have used my BK9 to chop, but I have also carved spoons and forks (I actually used them too...in fact my cousin still uses one of the forks I carved when he does competitive BBQ). I also use it for field dressing and final meat prep, food prep and hundreds of other tasks. Many laugh at first when I start using a 9" blade for these tasks, but always seem pleasantly surprised at how well it gets the job done.</p>
</li>
</ol>
<p dir="auto">My modded BK9<br />
<img src="https://i.imgur.com/KDEJO1Q.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://i.imgur.com/5ZGzPex.jpg?3" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Modded BK9 and BK10<br />
<img src="https://i.imgur.com/PJkgAj3.jpg?3" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Modded BK16<br />
<img src="https://i.imgur.com/1vDW2We.jpg?2" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">My "Tweeners"<br />
<img src="https://i.imgur.com/oacfbWN.jpg?1" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">BK7<br />
<img src="https://i.imgur.com/ZrQMqej.jpg?1" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Modded BK11<br />
<img src="https://i.imgur.com/4LFyH0j.jpg?2" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Modded BK14<br />
<img src="https://i.imgur.com/vIu4iH3.jpg?2" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">BK14 with homemade sheath<br />
<img src="https://i.imgur.com/EWDicpw.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I have quite a few more I need to photograph,,,I will post more images soon. Please share your thoughts and pictures!</p>
]]></description><link>https://multitool.ninja/topic/83294/becker-knives</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 15:35:17 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/83294.rss" rel="self" type="application/rss+xml"/><pubDate>Mon, 18 Nov 2019 03:39:20 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Becker Knives on Wed, 29 Apr 2020 03:00:53 GMT]]></title><description><![CDATA[<p dir="auto">Ok. I’m going to start by saying that this could be a great number of things other than the fault of the knife. It could be inner bias because of the condition I received it in. It could be the fact that it does not have a very good edge yet. It could be the fact that my technique might be wrong. In a week when all of this is corrected I could completely change my tune.</p>
<p dir="auto">I like the BK4 better. The BK21 didn’t chop all that well in thick stuff (transferred too much shock to the handle, didn’t cut deep enough for it’s forward weight.) It didn’t cut through thin stuff like the BK4 does. Going after vines was like hitting them with a stick. The BK4 is impressive to chop with, even when dulled. This is not. When I ordered it my desire was for a BK4 with longer reach. That’s not what this is so far.</p>
<p dir="auto">Again, I could be completely off and when I do work on the edge and get better technique everything could change.</p>
<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20200429/0e948f31cc1c8b4df04223804af652a7.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://uploads.tapatalk-cdn.com/20200429/d84f70ffac7e1ab7cd72036561d880cf.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2119025</link><guid isPermaLink="true">https://multitool.ninja/post/2119025</guid><dc:creator><![CDATA[G-Dizzle]]></dc:creator><pubDate>Wed, 29 Apr 2020 03:00:53 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Tue, 28 Apr 2020 15:17:18 GMT]]></title><description><![CDATA[<p dir="auto">I actually never mind having to work on any knife edge.  I like to dial in the edge to suit my usage and the steels potential.  I've only left a very few edges alone.  My Izula I got from a member was amazing to name one.</p>
]]></description><link>https://multitool.ninja/post/2118776</link><guid isPermaLink="true">https://multitool.ninja/post/2118776</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Tue, 28 Apr 2020 15:17:18 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Tue, 28 Apr 2020 14:07:43 GMT]]></title><description><![CDATA[<p dir="auto">I will have to do some work on the edge as well..</p>
]]></description><link>https://multitool.ninja/post/2118740</link><guid isPermaLink="true">https://multitool.ninja/post/2118740</guid><dc:creator><![CDATA[G-Dizzle]]></dc:creator><pubDate>Tue, 28 Apr 2020 14:07:43 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Tue, 28 Apr 2020 04:27:40 GMT]]></title><description><![CDATA[<p dir="auto">Thats not cool.  Understood you plan to use it and it will get scratched up BUT from you usage.  Back it goes even tho I am not the biggest fan of returning stuff.  If it was bought full price I want to be to one who puts the first dings on it.  If they want to give you a deep discount then.......   <img src="/assets/uploads/smileys/shrugging.gif" alt=":dunno:" title="I dunno" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2118652</link><guid isPermaLink="true">https://multitool.ninja/post/2118652</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Tue, 28 Apr 2020 04:27:40 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Mon, 27 Apr 2020 20:52:10 GMT]]></title><description><![CDATA[<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20200427/07fcef91bc56ac6f71e45ecb30389703.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2118556</link><guid isPermaLink="true">https://multitool.ninja/post/2118556</guid><dc:creator><![CDATA[G-Dizzle]]></dc:creator><pubDate>Mon, 27 Apr 2020 20:52:10 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Mon, 27 Apr 2020 20:46:46 GMT]]></title><description><![CDATA[<p dir="auto">My BK21 arrived today. I have to say, this is the first time that I’ve been unhappy with the finish on my Becker knives....</p>
<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20200427/004037a788b4f1089e60d1d58180e2b0.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20200427/c1f362bbc9c87ced3534c138929b889d.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">It arrived in sheath rather than a protective sleeve like Beckers normally do and I guess the buttons and nylon wore the finish off in transit? I got it to use hard, so I don’t know yet if I’ll send it back, but I am disappointed..</p>
]]></description><link>https://multitool.ninja/post/2118554</link><guid isPermaLink="true">https://multitool.ninja/post/2118554</guid><dc:creator><![CDATA[G-Dizzle]]></dc:creator><pubDate>Mon, 27 Apr 2020 20:46:46 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Thu, 23 Apr 2020 17:02:45 GMT]]></title><description><![CDATA[<p dir="auto">Lots of material does have to be removed as the repair would need to go to the bottom of the chip.  What I've done when I dont want to take off so much material is just repair to my satisfaction.  I can live with some chips so long as they</p>
<p dir="auto">I've also attacked the chips less "aggressive".  I use a guided system ( Lansky ) and use a steep setting.  You still take material off as its unavoidable but not worrying about getting to the bottom of the chips and you kill two birds.  You bevel and remove chip as you go.  Same process works with stones.</p>
]]></description><link>https://multitool.ninja/post/2116705</link><guid isPermaLink="true">https://multitool.ninja/post/2116705</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Thu, 23 Apr 2020 17:02:45 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Thu, 23 Apr 2020 16:35:04 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/aloha" aria-label="Profile: Aloha">@<bdi>Aloha</bdi></a> <a href="/post/2116249">said</a>:<br />
I can see them.  What I've done on machetes is file the actual edge ( 90 degree to stone or file ) to the lowest chip, then reprofile changing the bevels to suit me.</p>
<p dir="auto"><strong>Spoiler:</strong><br />
<a href="https://youtu.be/jCxT1GK1pd4" rel="nofollow ugc">https://youtu.be/jCxT1GK1pd4</a></p>
</blockquote>
<p dir="auto">Thanks for the tip! Do you think the same would work for this chip on my BK20? It is pretty deep so I haven’t tried to repair it yet. Happened when a tiny rock got stuck in the surface of the stump I was working in. I dont want to change the shape of the blade too much</p>
<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20200423/244e71f80103b99edc2700360626fa13.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2116674</link><guid isPermaLink="true">https://multitool.ninja/post/2116674</guid><dc:creator><![CDATA[G-Dizzle]]></dc:creator><pubDate>Thu, 23 Apr 2020 16:35:04 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Wed, 22 Apr 2020 17:33:24 GMT]]></title><description><![CDATA[<p dir="auto">I can see them.  What I've done on machetes is file the actual edge ( 90 degree to stone or file ) to the lowest chip, then reprofile changing the bevels to suit me.</p>
<blockquote>
<p dir="auto"><strong>Spoiler:</strong><br />
<a href="https://youtu.be/jCxT1GK1pd4" rel="nofollow ugc">https://youtu.be/jCxT1GK1pd4</a></p>
</blockquote>
]]></description><link>https://multitool.ninja/post/2116249</link><guid isPermaLink="true">https://multitool.ninja/post/2116249</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Wed, 22 Apr 2020 17:33:24 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Wed, 22 Apr 2020 06:14:16 GMT]]></title><description><![CDATA[<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20200422/f1f8d6155777de334715e3e416a16d13.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Finally got around to giving the BK4 a good edge again. Still some chips in the tip but it is tons better than it was. Will work on those another day.</p>
]]></description><link>https://multitool.ninja/post/2115959</link><guid isPermaLink="true">https://multitool.ninja/post/2115959</guid><dc:creator><![CDATA[G-Dizzle]]></dc:creator><pubDate>Wed, 22 Apr 2020 06:14:16 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Wed, 22 Apr 2020 04:20:34 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/woohoo.gif" alt=":woohoo:" title="Woohoo" class="forum-smiley emoji" /> Very nice.  The handles will eventually be the same after use.  You can also treat them.  Lovely knife.  <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2115948</link><guid isPermaLink="true">https://multitool.ninja/post/2115948</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Wed, 22 Apr 2020 04:20:34 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Wed, 22 Apr 2020 03:35:42 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/g-dizzle" aria-label="Profile: G-Dizzle">@<bdi>G-Dizzle</bdi></a> <a href="/post/2115719">said</a>:<br />
My BK62 Kephart got here the other day. Great feeling knife. Only thing that strikes me strangely is that the handle scales are very different in color. Oh well. It won’t affect performance at all.</p>
</blockquote>
<p dir="auto">I know I pretty much sound like a broken record, but I really do love this knife.  Btw, I think Kabar just released the new micarta handles for it, and also TKC will probably be releasing their own version as well.</p>
]]></description><link>https://multitool.ninja/post/2115938</link><guid isPermaLink="true">https://multitool.ninja/post/2115938</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Wed, 22 Apr 2020 03:35:42 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Tue, 21 Apr 2020 17:08:05 GMT]]></title><description><![CDATA[<p dir="auto">My BK62 Kephart got here the other day. Great feeling knife. Only thing that strikes me strangely is that the handle scales are very different in color. Oh well. It won’t affect performance at all.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/475449_9B56D79A-9BA5-4C5C-9F71-5D63DBD4B0CA.jpeg" alt="9B56D79A-9BA5-4C5C-9F71-5D63DBD4B0CA.jpeg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/475451_1C21F36F-8846-4405-B997-217B98C674F2.jpeg" alt="1C21F36F-8846-4405-B997-217B98C674F2.jpeg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2115719</link><guid isPermaLink="true">https://multitool.ninja/post/2115719</guid><dc:creator><![CDATA[G-Dizzle]]></dc:creator><pubDate>Tue, 21 Apr 2020 17:08:05 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Fri, 06 Mar 2020 14:06:58 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/comis" aria-label="Profile: comis">@<bdi>comis</bdi></a> <a href="/post/2096974">said</a>:<br />
<img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" />  Sorry, I must have missed this last time, thanks for checking!</p>
<p dir="auto">I will be getting one next time when I go knife shopping online.</p>
</blockquote>
<p dir="auto">It is pretty cool that the BK16 fits. Conversely though, the blade on the BK18 is too wide to fit in the nylon sheath.</p>
]]></description><link>https://multitool.ninja/post/2097047</link><guid isPermaLink="true">https://multitool.ninja/post/2097047</guid><dc:creator><![CDATA[spudley112]]></dc:creator><pubDate>Fri, 06 Mar 2020 14:06:58 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Fri, 06 Mar 2020 11:49:29 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/spudley112" aria-label="Profile: spudley112">@<bdi>spudley112</bdi></a> <a href="/post/2095615">said</a>:<br />
It sure does!</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" />  Sorry, I must have missed this last time, thanks for checking!</p>
<p dir="auto">I will be getting one next time when I go knife shopping online.</p>
]]></description><link>https://multitool.ninja/post/2096974</link><guid isPermaLink="true">https://multitool.ninja/post/2096974</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Fri, 06 Mar 2020 11:49:29 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Thu, 05 Mar 2020 17:18:55 GMT]]></title><description><![CDATA[<p dir="auto">Its looks great but I also like the original look as well.  No one will mistake that knife for anybodies but yours that for sure.</p>
]]></description><link>https://multitool.ninja/post/2096670</link><guid isPermaLink="true">https://multitool.ninja/post/2096670</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Thu, 05 Mar 2020 17:18:55 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Thu, 05 Mar 2020 16:16:44 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/agreesign.gif" alt=":iagree:" title="I agree" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2096623</link><guid isPermaLink="true">https://multitool.ninja/post/2096623</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Thu, 05 Mar 2020 16:16:44 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Thu, 05 Mar 2020 12:25:21 GMT]]></title><description><![CDATA[<p dir="auto">Great job!  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2096558</link><guid isPermaLink="true">https://multitool.ninja/post/2096558</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Thu, 05 Mar 2020 12:25:21 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Thu, 05 Mar 2020 00:17:38 GMT]]></title><description><![CDATA[<p dir="auto">Oooh, I like that!  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2096458</link><guid isPermaLink="true">https://multitool.ninja/post/2096458</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Thu, 05 Mar 2020 00:17:38 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Wed, 04 Mar 2020 23:10:38 GMT]]></title><description><![CDATA[<p dir="auto">Did a little work on it...<br />
Before<br />
<img src="https://i.imgur.com/lDhZnxz.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">After<br />
<img src="https://i.imgur.com/7XHXCSG.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://i.imgur.com/26nKScV.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://i.imgur.com/nGTszKB.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2096427</link><guid isPermaLink="true">https://multitool.ninja/post/2096427</guid><dc:creator><![CDATA[spudley112]]></dc:creator><pubDate>Wed, 04 Mar 2020 23:10:38 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Tue, 03 Mar 2020 01:44:56 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/comis" aria-label="Profile: comis">@<bdi>comis</bdi></a> <a href="/post/2095577">said</a>:<br />
I like the new coating, looks smooth! <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">One question--does the new sheath also work for BK16? <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">It sure does!</p>
]]></description><link>https://multitool.ninja/post/2095615</link><guid isPermaLink="true">https://multitool.ninja/post/2095615</guid><dc:creator><![CDATA[spudley112]]></dc:creator><pubDate>Tue, 03 Mar 2020 01:44:56 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Mon, 02 Mar 2020 23:28:45 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/spudley112" aria-label="Profile: spudley112">@<bdi>spudley112</bdi></a> <a href="/post/2095535">said</a>:<br />
Doing a little work on it to get it configured the way I want. Will post when it is a little more presentable.</p>
</blockquote>
<p dir="auto">I like the new coating, looks smooth! <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">One question--does the new sheath also work for BK16? <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2095577</link><guid isPermaLink="true">https://multitool.ninja/post/2095577</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Mon, 02 Mar 2020 23:28:45 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Mon, 02 Mar 2020 22:08:02 GMT]]></title><description><![CDATA[<p dir="auto">Doing a little work on it to get it configured the way I want. Will post when it is a little more presentable.</p>
]]></description><link>https://multitool.ninja/post/2095535</link><guid isPermaLink="true">https://multitool.ninja/post/2095535</guid><dc:creator><![CDATA[spudley112]]></dc:creator><pubDate>Mon, 02 Mar 2020 22:08:02 GMT</pubDate></item><item><title><![CDATA[Reply to Becker Knives on Mon, 02 Mar 2020 18:11:07 GMT]]></title><description><![CDATA[<p dir="auto">OH S%*@.  That looks every bit the business.   <img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2095460</link><guid isPermaLink="true">https://multitool.ninja/post/2095460</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Mon, 02 Mar 2020 18:11:07 GMT</pubDate></item></channel></rss>