<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Charge TTI vs Gerber Legend]]></title><description><![CDATA[<p dir="auto">So Ive been working at a steel plant for some years now. I started out with a Gerber Legend and after a few months, upgraded to the Charge, as the title implies. Surprisingly, it was not as much of an upgrade as I assumed it would be. Read on to find out why!</p>
<p dir="auto">Unlike most comparisons Ive read on here, these two tools rarely end up competing, as such. Any area in which one is superior ends up being a no-contest. Im having a hard time remembering which implements could even be compared properly. Maybe the flatheads.</p>
<p dir="auto">Anyway, here are the most striking differences:</p>
<p dir="auto">Locks</p>
<p dir="auto">All implements lock on both tools (or all implements that matter, anyway) but the unlocking mechanism on the Legend is just ridiculously bad. You have to use both hands and on top of that, the steel ridges dig painfully into your fingers as you pull them back. Its just... staggeringly uncomfortable. Feels like there were soft rubber caps there which fell off after prolonged use. Only there werent any rubber caps to begin with, no sir. The Charge has nice, comfortable locks which can be disengaged with one hand. Advantage - Leatherman.</p>
<p dir="auto">Pliers</p>
<p dir="auto">Gerber pliers are just better. Not only are they spring-loaded, theyre also more massive and feel a lot more solid. Not to mention the gripping area on the Charge is severely compromised by the wire crimper. It may not look like much in paper, but the difference in practice is very noticeable: Leatherman pliers constantly slip. Add to that...</p>
<p dir="auto">Wire-cutters</p>
<p dir="auto">Both sets have replaceable bits, but only the Gerber bit boasts three sides, making it potentially much longer-lasting in the field. Kind of a moot point, since I am yet to require replacing either. Still, Gerber wire cutters are a lot more aggressive and make short work of even heavy steel bands, where as the Leatherman struggles with even regular wire. A definite advantage to Gerber. Miss those pliers sorely...</p>
<p dir="auto">Bit driver</p>
<p dir="auto">Gerber kind of maybe has a bit set, but its not very impressive and frankly, is an afterthought. The Leatherman set of bit sets is comprehensive, to put it mildly. I was pleased to discover it has all the hex and star bits I need at my job, which saves me a ton of time over the course of the day. Never bothered with the bit extender, as the default Leatherman driver is flexible enough for my needs. An unexpected advantage to Leatherman in my eyes.</p>
<p dir="auto">Scissors</p>
<p dir="auto">I had known in advance scissors were the Charges weak point and indeed, they fall far short of what Im used to. Theyll cut... paper, I guess. If its not very thick. Theyll also cut a carton of milk in a pinch. For anything more robust, I have to go to the knife blade. Which is, incidentally, much easier, since the Charges scissors are not, in fact, outside-opening. Gerber scissors arent just beastly, arent just outside opening - theyre openable with one hand. Jeez but do I miss THAT feature... Advantage Gerber so much I think Im going to cry.</p>
<p dir="auto">Wood saw</p>
<p dir="auto">The Charge has one. I feel like its not as incredible as the one on Victorinox tools, but since I had to spend several months hunting for something to put into the Gerber to even CALL it a wood saw, this one is also rather one-sided. I suppose an escaping prisoner would prefer the diamond saw on the Legend, but us law abiding citizens will probably stick to what the Charge has to offer.</p>
<p dir="auto">File</p>
<p dir="auto">This one is probably closest, but since the Charge has a diamond file and the Legend only a regular one, its still a no-brainier.</p>
<p dir="auto">Maintenance</p>
<p dir="auto">One last category in which the two tools differ. The Legend requires constant oiling, lest it becomes covered with rust. No such problems with the Charge, even though I would not expect such a massive difference. I guess they use different kinds of steel. Ive had to sharpen both blades already, with the Charge having a much longer lasting edge, obviously. Plus, it has an entire separate serrated blade you can keep fresh for emergencies.</p>
<p dir="auto">Overall, its not hard to see why the Charge is considered the better tool, but I have to admit I find myself missing numerous features of the Legend. Hope Leatherman addresses these shortcomings in the future, instead of churning out expensive toys...</p>
<p dir="auto">Anyway, thats my take. Not sure how it could help anyone, but I hope it did, anyway.</p>
]]></description><link>https://multitool.ninja/topic/86985/charge-tti-vs-gerber-legend</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 16:10:10 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/86985.rss" rel="self" type="application/rss+xml"/><pubDate>Sun, 21 Mar 2021 08:41:04 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Charge TTI vs Gerber Legend on Wed, 31 Mar 2021 14:55:50 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />. The Charge is a very nice tool.  My TTi is a go to for work.  The LM bits and bit extender offer expanded capability.  I do really wish there was a blade exchanger.</p>
]]></description><link>https://multitool.ninja/post/2228011</link><guid isPermaLink="true">https://multitool.ninja/post/2228011</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Wed, 31 Mar 2021 14:55:50 GMT</pubDate></item><item><title><![CDATA[Reply to Charge TTI vs Gerber Legend on Wed, 31 Mar 2021 04:52:14 GMT]]></title><description><![CDATA[<p dir="auto">Honestly, Im  kind of broke at the moment, so no hunting for the perfect MT for me :P</p>
<p dir="auto">The Surge would probably do, if not for my tiny girly hands... not an evolutionary advantage at a factory, let me tell you. The Charge is about good enough and much, much better than what anyone else around here carries. I think by the time I start shopping for a work MT again, the things will have Bluetooth and laser saws.</p>
]]></description><link>https://multitool.ninja/post/2227887</link><guid isPermaLink="true">https://multitool.ninja/post/2227887</guid><dc:creator><![CDATA[Radrler]]></dc:creator><pubDate>Wed, 31 Mar 2021 04:52:14 GMT</pubDate></item><item><title><![CDATA[Reply to Charge TTI vs Gerber Legend on Wed, 24 Mar 2021 14:59:54 GMT]]></title><description><![CDATA[<p dir="auto">Thanks for the comparison in your uses.  Its why some carry 2 multitools which likely is not the best option  <img src="/assets/uploads/smileys/shrugging.gif" alt=":dunno:" title="I dunno" class="forum-smiley emoji" />.  Sounds like a modified MT might be in your future?  A blunt nose Surge?</p>
]]></description><link>https://multitool.ninja/post/2225715</link><guid isPermaLink="true">https://multitool.ninja/post/2225715</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Wed, 24 Mar 2021 14:59:54 GMT</pubDate></item><item><title><![CDATA[Reply to Charge TTI vs Gerber Legend on Wed, 24 Mar 2021 09:52:06 GMT]]></title><description><![CDATA[<p dir="auto">Excellent review! Some nice comparisons there. I wonder if the perfect Mt is out there for you.</p>
<p dir="auto">Having laid bare the pros and cons of each model are you tempted to look for a happy medium or will you stick with the Charge?</p>
]]></description><link>https://multitool.ninja/post/2225636</link><guid isPermaLink="true">https://multitool.ninja/post/2225636</guid><dc:creator><![CDATA[magentus]]></dc:creator><pubDate>Wed, 24 Mar 2021 09:52:06 GMT</pubDate></item></channel></rss>