Different Swisstool plier heads , the truth
-
Thanks :D
To me, the plier head used is either going to be weak when loosening or weak when tightening. How many people have actually had their tools break because of the old design pliers?
-
To me, the plier head used is either going to be weak when loosening or weak when tightening. How many people have actually had their tools break because of the old design pliers?
I've never had a break, but I've seen at least two old Leatherman PST's with plier pivots that were sprung. The tips of the needlenose jaws no longer lined up as a result. It seems likely that this was caused by trying to loosen a stuck bolt with the pliers.
(But you are absolutely correct, if the jaws were opposite handed, the same thing could have happened while tightening a bolt. :-\
-
To me, the plier head used is either going to be weak when loosening or weak when tightening. How many people have actually had their tools break because of the old design pliers?
while I've heard about quite a few other brand tools plier heads breaking the only Swisstool pliers I have heard about was a guy on Bladeforums who had a relation who used a Swisstool to hold things while welding and while there were no photos to confirm the story I can easily believe it due to the heat involved with welding . The temper of the steel must have been changed and I think it wouldnt have made any difference what tool the guy had used the result would have been the same .Apart from that I have never known anyone to break the pliers on a Swisstool . Come to think of it I dont know anyone to have broken any tools on a swisstool , apart from me :D when I bent the screwdriver/caplifter using it as a prybar :D Yes I know theres a dedicated prybar on the tool but I didnt use it at the time ::) Still i bent it back straight and its just as normal as ever :D
Dunc
-
That doesn't surprise me. I would be more inclined to think that the weakest point on these tools would be where the plier heads are attached to the handles, and even then they'd be pretty tough.
-
Just took a couple of pics that I think you may find interesting
The oldest Swisstool is in the left on both pictures . In the first photo both pliers are FULLY open and the second pic FULLY closed . Seems to me the older plier head out performs the newer one in terms of opening and comfort when gripping something because the handles are closer together


Dunc
-
Interesting! I wonder if this is a result of thickening of the plier jaws at the base of the new model?
-
Is it just my eyes or does the new head's pivot pin look smaller in diameter?
-
I really appreciate this thread. The photo of all the Swisstool versions and the detail discussed here is helpful.
-
The posting with the picture has expired.
We do have a picture of the owner:

-
:D :D :D
I think it would take king kong to break a Swisstool :o :o
-
I agree, personally I suspect that Leatherman photo shopped the broken SwissTool in a futile effort to establish thier product superiority. I will say this I do miss the Longer Reach on the Leatherman sometimes.
Dtrain
-
I think it's cool that apparently a member of the founder's family is answering emails.
Chad
-
Welcome aboard ChadHahn !

-
-
Thanks for the welcome. I'm from Arizona.
I used what I found out in this post was a '95 Swisstool as my Multitool of choice on a cross-country motorcycle trip (at least from AZ to NE and back again) a few years ago. I never had to use the tool, probably because the bike was intimidated by the presence of the Swisstool. :sak:
Chad
-
An 82 Honda CB900C. Shaft driven with overdrive transmission and air suspension. Because of the sidebags it really started to shake around 100 MPH in western Kansas.
Three days from Tucson to Lincoln, NE. Boy was my butt sore!
I haven't driven it since that trip because I had a child and my wife doesn't think being a dad and having a motorcycle mix. Especially in a state and town with lots of half-blind and deaf snowbirds. :o
Chad
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login