And so it begins.... (My adventures into Alox!)
-
If you have 3D CAD drawings of the parts you should be able to get pretty accurate surface area values. Good luck with it, I'm interested to see what results you obtain

-
-
@TazzieRob said:
If you have 3D CAD drawings of the parts you should be able to get pretty accurate surface area values. Good luck with it, I'm interested to see what results you obtain
I did some reading on anodize theory, its really facinating. The alum oxide grows perpendicular from the surface like little hairs from the surface. The spacing of those 'hairs' its what determines the hardness (not layer thickness as I had thought). Now.. the higher the current density the smaller the pore size (space between the hairs) and the harder it is to dye which is why hard anodize has less dye options as only some dyes are small enough to fit in the smaller pores!
Similarly if the current density is too low, the 'hairs' are too far apart and the dye wont be trapped, and color will leak back out even if sealed.
So! This is right up my alley for careful controlled experimentation and taking notes it will be like being back in the lab, but making cool parts too...
And now that I found blue masking lacquer, I can mask off the shields and then dye the scales any color! :D :D :D
-
If you have 3D CAD drawings of the parts you should be able to get pretty accurate surface area values. Good luck with it, I'm interested to see what results you obtain

I did some reading on anodize theory, its really facinating. The alum oxide grows perpendicular from the surface like little hairs from the surface. The spacing of those 'hairs' its what determines the hardness (not layer thickness as I had thought). Now.. the higher the current density the smaller the pore size (space between the hairs) and the harder it is to dye which is why hard anodize has less dye options as only some dyes are small enough to fit in the smaller pores!
Similarly if the current density is too low, the 'hairs' are too far apart and the dye wont be trapped, and color will leak back out even if sealed.
So! This is right up my alley for careful controlled experimentation and taking notes it will be like being back in the lab, but making cool parts too...
And now that I found blue masking lacquer, I can mask off the shields and then dye the scales any color! :D :D :D
Sounds awesome. The explanation of growing like hair gives me a goosebumps.
-
More 91mm grenade texture alox! :D Compact toolset with brass liner.







Cheers!
-
Nice mod Syph....the brass liner looks sharp...
-
Beautiful. Now all it needs is a mini screwdriver (in brass instead of plastic) 8)
-
-
Beautiful. Now all it needs is a mini screwdriver (in brass instead of plastic) 8)
That would be cool. I think that would be tricky to do by hand though. :D
I suspect you could make the brass screwed part, and solidly insert the screwdriver blade somehow (maybe a tight press fit would be sufficient, as the torque on the blade is very miniscule). But you'd have more of a problem tuning the fit of the whole screwdriver into the corkscrew.
Brass doesn't have the "give" that plastic offers, the fit would need to be especially precise, and maybe a tight cork or two would ruin the fit again :( :( -
Looks great Syph!
Sent from my XT901 using Tapatalk
-
Beautiful. Now all it needs is a mini screwdriver (in brass instead of plastic) 8)
That would be cool. I think that would be tricky to do by hand though. :D
I suspect you could make the brass screwed part, and solidly insert the screwdriver blade somehow (maybe a tight press fit would be sufficient, as the torque on the blade is very miniscule). But you'd have more of a problem tuning the fit of the whole screwdriver into the corkscrew.
Brass doesn't have the "give" that plastic offers, the fit would need to be especially precise, and maybe a tight cork or two would ruin the fit again :( :(I don't think a tight fit is necessary. A little play would be fine, it can't fall out anyways. I remember seeing a metal one posted here on MTo some time ago.
I'll ask a friend of mine who just upgraded his 3D printer to a very sophisticated model. Maybe he can print one in a cool material/color. -
Beautiful. Now all it needs is a mini screwdriver (in brass instead of plastic) 8)
That would be cool. I think that would be tricky to do by hand though. :D
I suspect you could make the brass screwed part, and solidly insert the screwdriver blade somehow (maybe a tight press fit would be sufficient, as the torque on the blade is very miniscule). But you'd have more of a problem tuning the fit of the whole screwdriver into the corkscrew.
Brass doesn't have the "give" that plastic offers, the fit would need to be especially precise, and maybe a tight cork or two would ruin the fit again :( :(I don't think a tight fit is necessary. A little play would be fine, it can't fall out anyways. I remember seeing a metal one posted here on MTo some time ago.
I'll ask a friend of mine who just upgraded his 3D printer to a very sophisticated model. Maybe he can print one in a cool material/color.That would be a good candidate cor printing.
As a challange to do by hand i would start with square bar stock and mark each side and use a jewelers saw to cut but sanding the inside part would take a long time.
-
I guess this one would be a yeoman tinker... hmm ya that sounds about right. Just for conversation sake of the 7 91mm alox/Ti customs only one had the corkscrew so far, but whenever there is a poll people choose the corkscrew about 9 to 1.








-
Unusual choice, two Phillips drivers

I feel so special now, with the only corkscrew-equipped SAK ;)
-
I realized this week that I don't have a single Vic SAK with a backlayered Phillips. :o And only two Wengers with that feature.
-
-
@enki_ck said:
I realized this week that I don't have a single Vic SAK with a backlayered Phillips. :o And only two Wengers with that feature.Its not that its my preference for use, but I like the feel of the SAK better without the corkscrew. To be honest I dont use either ever, but since it has to be there, I pick phillips.
-
@Syph007 said:
I guess this one would be a yeoman tinker... hmm ya that sounds about right.Sweet!!! Nice work Syph. Kirk13 on another thread coined this version the "Duke of Yeoman", but I like the "Yeoman Tinker" equally.
@enki_ck said:
I realized this week that I don't have a single Vic SAK with a backlayered Phillips. :o And only two Wengers with that feature.Funny you mentioned this. I have only seen the two Phillips implements (inline and backtool) on Wengers and not on a Vic. The Wenger Matterhorn is a good example of this.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
