SOG tool list
-
A chart of the various components SOG equips each tool with:
-
It's actually a bit handier to use that same chart on SOG's website HERE. By passing your cursor over the various model numbers (B60, S44, etc) a little picture of that tool will pop up in the window at the top.
-
We forgot about the ToolPlex.

...sort of looks like a SwissCard.
-
I think we can blame ToolLogic for starting the "credit card sized tools that break in half in your wallet" craze. While I do have a few SwissCards and others in my collection, I have never really seen them worthy of actual carry. I did have a SwissCard Quattro in my PDA case for a time, but the only thing I ever used on it was a toothpick.
Of course, they are still well worth mentioning!
Def
-
I actually liked carrying a Card sized multi while camping/backpacking. They're pretty light, and small sized... plus, some have a signal mirror on one side. :) I'd like to see one with a small thin pair of needlenose pliers in it.
-
Yeah they can be handy for that. I like to keep them in the tent for little things, and the scissors on the SwissCards are great. Beyond that though I am not a huge fan.
I did get one for my brother and he loves it. Or at least he did until he tried to get on an airplane with it! He forgot it was in his wallet. Fortunately he had enough time before his flight to go back and drop it in his car.
Def
-
I found the wallet card very handy.
-
@Defender said:
And the other part I was looking for... Nice to have them all in one place now!Def
Double tooth saw: 7.95
3" straight blade: 6.50
3" serrated blade: 6.50
1/2 serrated blade: 6.50
File (3-sided) #6092: 6.50
Large screwdriver: 6.50
Phillips Screwdriver: 6.50
Robertson Drive: 6.50
1/4" Drive: 6.50
1/4" Socket adapter: 5.95
Awl: 6.50
Can Opener/sm S.D.: 6.50
Bottle Opener/Med S.D.:6.50
Pl. handle Covers: 2.00
V-cutter: 9.95
Pl Scissor accessory: 7.95
Serrated Line Cutter: 7.95
Wrench Kit*: 7.95
Accessory 3-pack: 19.95
CC/CG double-sided file: 5.00
Thumbstuds: 5.00
Clips: 5.00
TiNi Clips: 7.00
T-5 and T-6 torx: 5.00
Hexnut male and Female: 2.00
Plier: 12.95*wrench kit isn't the ability to put a wrench on your powerlock instead it is two wrenches perfectly fit to remove and replace the bolts on your powerlock.
now i got to ask does any of y guys have 3" serrated locking blades,1/4 drivers and socket adapter u could sell to me,sorry this is rong topic,but at the same time i would like to know if theres any webshop that sells these easily overseas and accepts paypal,with out any email hassle :D
-
@Defender said:
I think we can blame ToolLogic for starting the "credit card sized tools that break in half in your wallet" craze. While I do have a few SwissCards and others in my collection, I have never really seen them worthy of actual carry. I did have a SwissCard Quattro in my PDA case for a time, but the only thing I ever used on it was a toothpick.Of course, they are still well worth mentioning!
Def
I carried a Swisscard Lite in my wallet until I lost it. :(
-
I got a wallet I can fit a real SAK or multitool into.
I don't get the card tools. Flimsy, and not really that compact for what they do.
You're supposed to put it in your wallet with your cards, but I have too many cards already. -
Is SOG the only one that sells individual tools for their multis?
-
@AndyTiedye said:
Is SOG the only one that sells individual tools for their multis?Yes that is the case unfortunately. :( Furthermore, SOG instructs and encourages people in their User's Manuals to swap out blades and customize their multitools for specific needs.
None of the other manufacturers do this. Leatherman and Gerber use special fasteners which discourage tampering, while Victorinox and others use permanent rivets. :-\
-
The Leatherman forum had threads on obtaining the security torx screwdrivers,
and SOSAK has extensive tutorials on removing the "permanent" rivets and modding SAKs in general.
Does seem more difficult than it needs to be in both cases.In both cases, the only source of parts is taking apart other tools.
Not too much of an issue for SAKs generally, because they're cheap,
but could get costly for multitools.I could see setting up a multi without any blades, and carrying all the blades on a SAK.
It is usually a bit awkward to use blades on a MT compared a SAK or other knife, because
the knife is optimized for using the blades, while the MT is usually optimized for the pliers.Such a set-up would also be handy for travel, if you could end up with an airplane-friendly MT
while keeping all the sharp stuff on a SAK in the checked baggage. -
@AndyTiedye said:
The Leatherman forum had threads on obtaining the security torx screwdrivers,
and SOSAK has extensive tutorials on removing the "permanent" rivets and modding SAKs in general.
Does seem more difficult than it needs to be in both cases.In both cases, the only source of parts is taking apart other tools.
Not too much of an issue for SAKs generally, because they're cheap,
but could get costly for multitools.I could see setting up a multi without any blades, and carrying all the blades on a SAK.
It is usually a bit awkward to use blades on a MT compared a SAK or other knife, because
the knife is optimized for using the blades, while the MT is usually optimized for the pliers.Such a set-up would also be handy for travel, if you could end up with an airplane-friendly MT
while keeping all the sharp stuff on a SAK in the checked baggage.All very good points.
Aftermarket blades and readily-modified tools are one of the things I really respect SOG for.

-
Why can't I order a 1/4" socket drive in satin black?
-
Any word when the new SOG's will be released
I'm looking for a PowerLock S67 or B67 ( eod version) - more blades than the "69" version according to the posted chart in this thread
TIA
-
eodtech: I see your picture below your post is that a SOG? and why do I not see them on the catalogs, discontinued?
-
@darkhawk said:
eodtech: I see your picture below your post is that a SOG? and why do I not see them on the catalogs, discontinued?That would be the highly elusive and most exquisite SOG ToolClip you refer to darkhawk. Link: https://wiki.multitool.org/tiki-index.php?page=ToolClip
A real sweetheart indeed, but discontinued for over 15 years now. :(
-
Is SOG the only one that sells individual tools for their multis?
Yes that is the case unfortunately. :( Furthermore, SOG instructs and encourages people in their User's Manuals to swap out blades and customize their multitools for specific needs.
None of the other manufacturers do this. Leatherman and Gerber use special fasteners which discourage tampering, while Victorinox and others use permanent rivets. :-\
I dropped a note to Bear & Son about purchasing a saw blade for my 155L and received a reply the next day that, yes, indeed I could do so.
-
Sog also rebranded a powerlock as a master mechanic. I didn't realize they did that with the pocket power plier until I read this thread. I got my master mechanic from tru value.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login