What did you use your Leatherman for today?
-
Using my Wave and bit driver/extender to open an old wifi router, get a piece of broken plastic antenna locker an then Wave's pliers to glue it back and hold in place
Dream. Wish. Leave nothing undone. Repeat.

-
@alexanderre said:
Using my Wave and bit driver/extender to open an old wifi router, get a piece of broken plastic antenna locker an then Wave's pliers to glue it back and hold in place
Dream. Wish. Leave nothing undone. Repeat.
So now it works and looks like new.
And the owner now has two wifi routers. Should have asked me to look into it earlier, that'd save her 20-30$ for sure, since it was my pleasure tinkering with it anyway :)
Dream. Wish. Leave nothing undone. Repeat.

-
I used my Rebar's serrated blade to cut several zip ties used to attach decorations on our church's float in the 4th of July parade.
Sent from my XT901 using Tapatalk
-
I used the blade on my C33T to cut apart tags from water guns for the mini water park that was set up at my church cookout on Sunday.
-
Fixed a screen.

Replaced a stoves receptacle for a burner.

http://ssvs.zenfolio.com/img/s9/v96/p1307281297-4.jpg

Fixed a sink stopper for a bathroom.

Cut chain on toilet flappers.

Fixed some broken blinds.




-
@Higgins617 said:
Used my Sidekick to cut up some mackerel for fishing earlier today, it involuntarily became a beater this week
. I had these things in my bag that you're supposed to toss into the fire to change color. And some of it got out of the package and onto my Sidekick which had previously been in like new shape. Well whatever was in the things was pretty damn corrosive and certainly left its mark 
Oh well, now the Sidekick is going to be my salt water fishing tool I guess. Kept it in my pocket while we fished out of the kayaks, and I of course ended up in the water multiple times. Nice to have something I can use in less than ideal conditions, not the ideal way for that to happen though.

Give it a Coca Cola bath for 24 hours then wash with warm soapy water and rinse very well. She will be good as new.
-
It's too hot out there to be serious, so let's just chill [emoji482]
Dream. Wish. Leave nothing undone. Repeat.

-
Mine came in handy rebuilding the patio benches.


-
Wow, so I was driving to the airport. I was about 30 feet from my parking spot and heard a clank and then the Jeep wouldn't move. Turns out the yoke to the rear axle broke and the end of the drive shaft was on the ground.
My plane was boarding in 30 minutes and I didn't have really any good options. So after staring in disbelief for a while, I decided I could put it in 4-wheel drive to get it into a parking spot and fix it when I got back.
The part where the LM comes in...I had to get the drive shaft off the ground. Took a metal hanger from my suitcase and used my ST300 to bend it and twist around the drive shaft and off the ground. I limped the Jeep into the parking spot and got on my plane.
-
@eddie1115 said:
Wow, so I was driving to the airport. I was about 30 feet from my parking spot and heard a clank and then the Jeep wouldn't move. Turns out the yoke to the rear axle broke and the end of the drive shaft was on the ground.My plane was boarding in 30 minutes and I didn't have really any good options. So after staring in disbelief for a while, I decided I could put it in 4-wheel drive to get it into a parking spot and fix it when I got back.
The part where the LM comes in...I had to get the drive shaft off the ground. Took a metal hanger from my suitcase and used my ST300 to bend it and twist around the drive shaft and off the ground. I limped the Jeep into the parking spot and got on my plane.
Nice recovery Ed.
You did not get any warning before it failed? Usually you will get a vibration.
-
Wow, so I was driving to the airport. I was about 30 feet from my parking spot and heard a clank and then the Jeep wouldn't move. Turns out the yoke to the rear axle broke and the end of the drive shaft was on the ground.
My plane was boarding in 30 minutes and I didn't have really any good options. So after staring in disbelief for a while, I decided I could put it in 4-wheel drive to get it into a parking spot and fix it when I got back.
The part where the LM comes in...I had to get the drive shaft off the ground. Took a metal hanger from my suitcase and used my ST300 to bend it and twist around the drive shaft and off the ground. I limped the Jeep into the parking spot and got on my plane.
Nice recovery Ed.
You did not get any warning before it failed? Usually you will get a vibration.
Thanks! And you're right, I noticed some bad vibrations getting off the highway. I was hoping I could get to the airport (and back) before something broke, but that was not the case...
The silver lining in all of this, when I got back, the company running the parking lot area said they could cover the tow back to my house, and I was greatly appreciative :)
-
Nothing so adventurous for me and my Rebar today, although it got me out of similar jams in the past. I used mine to fix my fridge today, which we woke up to not working after going to the grocery store last night. Isn't that the way it always works?!
-
Wow, so I was driving to the airport. I was about 30 feet from my parking spot and heard a clank and then the Jeep wouldn't move. Turns out the yoke to the rear axle broke and the end of the drive shaft was on the ground.
My plane was boarding in 30 minutes and I didn't have really any good options. So after staring in disbelief for a while, I decided I could put it in 4-wheel drive to get it into a parking spot and fix it when I got back.
The part where the LM comes in...I had to get the drive shaft off the ground. Took a metal hanger from my suitcase and used my ST300 to bend it and twist around the drive shaft and off the ground. I limped the Jeep into the parking spot and got on my plane.
Nice recovery Ed.
You did not get any warning before it failed? Usually you will get a vibration.
Thanks! And you're right, I noticed some bad vibrations getting off the highway. I was hoping I could get to the airport (and back) before something broke, but that was not the case...
The silver lining in all of this, when I got back, the company running the parking lot area said they could cover the tow back to my house, and I was greatly appreciative :)
I had an old Chevy truck I drove for over a year with a u joint vibration. It had a huge cross member brace under the driveshaft so other then a little damage to the bottom of the truck there was no worry about it hitting the ground. Finally gave up the goods but seeing how I bought the truck new in 92 and finally sold it before deployment last year I think I got my moneys worth.
-
Wow, so I was driving to the airport. I was about 30 feet from my parking spot and heard a clank and then the Jeep wouldn't move. Turns out the yoke to the rear axle broke and the end of the drive shaft was on the ground.
My plane was boarding in 30 minutes and I didn't have really any good options. So after staring in disbelief for a while, I decided I could put it in 4-wheel drive to get it into a parking spot and fix it when I got back.
The part where the LM comes in...I had to get the drive shaft off the ground. Took a metal hanger from my suitcase and used my ST300 to bend it and twist around the drive shaft and off the ground. I limped the Jeep into the parking spot and got on my plane.
Nice recovery Ed.
You did not get any warning before it failed? Usually you will get a vibration.
Thanks! And you're right, I noticed some bad vibrations getting off the highway. I was hoping I could get to the airport (and back) before something broke, but that was not the case...
The silver lining in all of this, when I got back, the company running the parking lot area said they could cover the tow back to my house, and I was greatly appreciative :)
I had an old Chevy truck I drove for over a year with a u joint vibration. It had a huge cross member brace under the driveshaft so other then a little damage to the bottom of the truck there was no worry about it hitting the ground. Finally gave up the goods but seeing how I bought the truck new in 92 and finally sold it before deployment last year I think I got my moneys worth.
Nice! I'd say so.
-
-

Is that a Nitecore whistle?
Just ordered one, are you happy with yours?
Love whistle , super light and compact

-
Used my OG Supertool to replace a three prong plug on a heavy duty extension cord for work.
-
Skeletool killed it today! Must be itching to prove itself on its first day back!
I work in the back of Homegoods, a store that sells, well, home goods (from furniture to kitchen to shower curtains to garden things), and the first use was opening boxes (when the mgr. wasn't about sshh). The second, was the woman next to me needed a screwdriver for something (we unbox and occasionally assemble things) needed a Philips, whip out the skeletool (Philips already affixed of course), boom. Even elicited a "wow this really works well!" And third, I was able to tighten one of the screws up on my motorcycle helmet on the ride home.
Lovely day to be a Leatherman :DEdit: A paragraph this size typed on a phone will have errors. It's a fact. :)
-
I fixed our rubbish bin with my Charge and modded a nerf gun with my OHT.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
