The Mega84
-
Thanks mate
That makes more sense now. I'll do the test build tomorrow and see how sensible everything looks. I'd rather not go to that extent on the tangs if I can help it, and I need to see if I can make it work (for me) a different / easier way. I don't have the time or facilities for anything too elaborate. Grinding a little off here or there is one thing, but reforming and redrilling entire tangs is not what I had in mind :D -
All knives are now apart, and the micrometer and vernier calipers have come out to play. Due to the assorted ages of the knives, the main blades vary from 2.0mm to 2.4mm. This actually does me a favour though, as the tang on the 93mm awl is thicker than a standard 84mm nail file, small blade, or combo tool.
Awl plus segmented spacer = 2.8mm, so I need the thicker spring. However, the thicker spring only measures 2.3mm. I also need to use selective assembly on the liners too. They have differing offsets where they have been stamped, giving different effective thickesses at different points, and I also need to carefully choose another layer for modification. Due to the configuration of the knife, I need three liners with the corkscrew/phillips cutout, but out of these five donors I only have two (from the Salesman and Sportsman).
Once I've matched everything up as good as possible, modified the liners and tangs as necessary, I still need to make a couple more decisions; firstly whether any additional washers are needed to get smooth function but also let the scales sit flat, and secondly whether to use any of the stock scales or something different

-
Cutting up the b/s awl to make a tapered backspring support with no vice a cordless drill and a few handtools is f-f-f-frustrating to say the least

-
YOU SMURFING AWKWARD SMURFING THING!!!!!

-
If at first you don't succeed.... swear louder
If you still don't succeed..... have a little break before trying again
If you still don't succeed..... cheat!
It's only there to tension the backspring, anneal it >:D
(if that doesn't work, the 4.1/2" angle grinder is coming out
) -
BTW, Al, are you still posting from your phone or is you camera broken.


-
Pics? Why would you want to se a grown man cry? That's just evil
:P :D
To be honest I have been posting from my phone, and just brought the camera upstairs to see if I got any decent pics

-
@50ft-trad said:
To be honest I have been posting from my phone, and just brought the camera upstairs to see if I got any decent pics
.... and no I didn't

Looks like I didn't stop for pics all that often :-[
Here's a few of the tools I've been using, and one of the donors waiting for slaughter though ...
-
Chaos .......
-
Now that's better. :D
-
At this moment in time it's still at the "dead spider" stage. Just gradually working through what works and what doesn't, before planning the refinements and moving it on a step or two
-
A very appropriate mug. ;)
-
It was a gift from a friend that I've known since we were 5. He probably knows me better than anyone :D
-
Yes, I think I'm pretty happy with that!
Still needs a little bit of tweaking and adjusting, but conceptually at least, it does seem to work. Awl sits low enough to be safe, Phillips tucks away nicely, but can still be accessed, and whilst access to the cap lifter and nail file is a little fiddly, it can be done.
I need to accept a little bit of compromise on a first ever build with bloody awkward layout I suppose :D
-
It's not got the rights segmental spacers on the awl and nail file yet, and the liners down the centre of the Phillips need opening up a little so you can access the driver easier from the end. Other than that, it seems pretty functional which is the main thing.
I think with this being my first build, and somewhat of a mismatch of parts, I might be safer peening it up with the bushes I've salvaged, popping on some nylon scales, and giving it some carry time. That way any problems have got chance to identify themselves before I start thinking about making scales for it
-
It doesn't feel to unwieldy a pocket knife either. It's quite a weighty affair, but with that amount of function it's unavoidable really.
My main aims were to build an scissor laden 84mm with both phillips and corkscrew, and both serrated and plain blades, but without losing the awl. The saw was a bit of a "why not" rather than "must have", and the nail file seemed logical with already having full size plain and serrated blades.
-
Very clever with the Phillips

-
I say use the small blade instead of the nail file
It works better for some tasks. But does a 91mm one fit the 84s frame? I kind of hate the 84mm small blade.The wood saw adds heft, I'm not sure a metal file wouldn't be preferable. I know this means more modding and perhaps getting a file too but for this size that would be my pick.
I thought you didn't like nylon scales?
anyway...Oh, and inline awl
That one's lovely, yeah! -
@firiki said:
I say use the small blade instead of the nail file
It works better for some tasks. But does a 91mm one fit the 84s frame? I kind of hate the 84mm small blade.The wood saw adds heft, I'm not sure a metal file wouldn't be preferable. I know this means more modding and perhaps getting a file too but for this size that would be my pick.
I thought you didn't like nylon scales?
anyway...Oh, and inline awl
That one's lovely, yeah!It's MUCH harder trying to find an 84mm file than any other tool in the 84mm range, and one thing I never got hold of. It was available a couple of times, but at a price I wasn't prepared to pay, particularly not for just breaking it down for parts. I could have cheated and used a Wenger file, but I reckon I can make do with the nail file.
As to the small blade, I don't like having two plain blades on the same knife if I can help it. That's one of the reasons I liked the Traveller over the Climber. The pruner blade that's left over from the Rancher I stole the awl from, will be destined to go in a CT41 with a serrated blade from a Weekender. Two distinctly different blades again, and which takes inspiration from the Original Outdoorsman which is another favourite of mine. I'd imagine a 91mm small blade would be different to an 84, so that would take work too. Besides, I have to have two full blade layers to get the Phillips and Corkscrew in, so adding a third blade instead of a different function just seems a bit of a waste

Nylon scales? I like the ones on the Voyager, and don't mind the ones on the 84s. They are a bit more durable than the celidor, and they do have better grip when wet, but I do still prefer the feel of celidor on the whole. I much prefer the nylon to the feel of alox too ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login