The Mega84
-
That's not going to work grinding that off 
Bacon sandwich and cup of tea required while I think this through....

-
Bacon butty completed, Mega84 built up and clamped, and Phillips sits at an acceptable height with no spring modification (spring sits sufficiently off centre on the driver).
Commence operation "whack it with a hammer" :D
-
@50ft-trad said:
I really can't believe how well that works. They've actually slightly "over peened" and don't quite seat in the bushings, so I'm just tickling them up with a file. It actually gives a nice domed and burnished finish.Alox modders take note!
Ha, I had that idea and tried to peen an alox mod together... the drill got away from me and just ended up damaging the scales. I gave up on peening alox after that try. :D
As for pre peening I dont bother any more just put the rods through, cut to lenght and pen both ends.
-
Mega84 v1 is complete and operational





-
Very nice Al

-
It's not 100% perfect, and there is a tiny bit of daylight between the springs/liners, though it is fully functional.

-
@50ft-trad said:
I really can't believe how well that works. They've actually slightly "over peened" and don't quite seat in the bushings, so I'm just tickling them up with a file. It actually gives a nice domed and burnished finish.
Alox modders take note!
Ha, I had that idea and tried to peen an alox mod together... the drill got away from me and just ended up damaging the scales. I gave up on peening alox after that try. :D
As for pre peening I dont bother any more just put the rods through, cut to lenght and pen both ends.
Using the hammer drill for pre peening did make it a lot easier, although I just finished off with a hammer so I had more control

-
Great work

-
I carried it for half an hour before I realised I forgot something :ahhh :ahhh
Mini-driver for the corkscrew :D Now sorted
;)A quick count up of the features:
Full sized plain blade
Full sized serrated blade
Scissors
Wood saw
Corkscrew
Nail file
Inline awl
Phillips driver
Large flat blade driver
Small flat blade driver
Eyeglasses precision driver
Can opener.... untested
Cap lifter
Wire bender
Toothpick
Tweezers -

I think thats gotta be the most tools on an 84mm mod Ive ever seen. Excellent job!
-
I so envy you folks that have the skill to mod these SAKs. As SAKs are one of my favorite things, I like them even more for the fact they can be customized with so many different parts/implements as I like to call them. I've pondered over what would make my perfect SAK and it changes almost daily. Currently, I am quite content with the Swisschamp, but would actually like to add a pruner blade and electrician blade to it, along with possibly some other implements.
I think the SAK I really want is the XLT (correct me if I'm wrong), the one the adds the pruner, elec. blade, and cyber tool. ???
Anyhow, whenever I see a mod like this it gets the gears turning in my head and if I could afford the overhead, I might even get into modding myself! ::)
-
@50ft-trad said:

I think thats gotta be the most tools on an 84mm mod Ive ever seen. Excellent job!
Thank you

Coming from a professional modder, that means a lot

Its hard to think of what else you'd be able to add. Pliers would be kind of impossible to add on an 84, so the only other thing you could go for would probably be a metal file/saw. It would work on the wood saw backspring, but youd have to shorten it to fit.
I stopped working on 84s as it was much more difficult than any other size to work on. I still get alot of requests though for cadets with scissors, so someday I'll get back to working on that size.
-
@sawman said:
I so envy you folks that have the skill to mod these SAKs. As SAKs are one of my favorite things, I like them even more for the fact they can be customized with so many different parts/implements as I like to call them. I've pondered over what would make my perfect SAK and it changes almost daily. Currently, I am quite content with the Swisschamp, but would actually like to add a pruner blade and electrician blade to it, along with possibly some other implements.I think the SAK I really want is the XLT (correct me if I'm wrong), the one the adds the pruner, elec. blade, and cyber tool. ???
Anyhow, whenever I see a mod like this it gets the gears turning in my head and if I could afford the overhead, I might even get into modding myself! ::)
So far as this goes, I certainly wouldn't call myself skilled. I just winged it :D and it was all done at my kitchen table (apart from the peening - table wasn't up to it, so I used the concrete step outside the back door) without any special tooling. The right size nail could be used for a punch. A large hammer as an anvil.
As to the XLT wishes, my next Vic mod will be a Cyber-Outdoorsman. Take a CT41, ditch the pliers, and switch the large and small blades for large serrated and pruner. However, I've not completely abandoned the idea of also breaking up a Voyager Lite, including the Phillips and torch layer, switching the hooks over for the nail file on the back, and of course having the alarm clock scales.
In the meantime I have one more mod to look at. A simple (hopefully) Wenger upgrade :)
-
@50ft-trad said:

I think thats gotta be the most tools on an 84mm mod Ive ever seen. Excellent job!
Thank you

Coming from a professional modder, that means a lot

Its hard to think of what else you'd be able to add. Pliers would be kind of impossible to add on an 84, so the only other thing you could go for would probably be a metal file/saw. It would work on the wood saw backspring, but youd have to shorten it to fit.
I stopped working on 84s as it was much more difficult than any other size to work on. I still get alot of requests though for cadets with scissors, so someday I'll get back to working on that size.
Yeah, I think the best thing for pliers on an 84 would be to start from scratch, and conjure up something like they have on the Rangers with the triple backspring. Not a job for at the kitchen table though :D It would have been nice to have the metal saw in there too, but that might have been one tool too many. At the minute it's a very good size and weight, and isn't too unwieldy or obtrusive.
I was actually walking around earlier and thought to myself you can't actually tell it's in the pocket.... then I realised it wasn't even in my pocket

-
@50ft-trad said:
@50ft-trad said:

I think thats gotta be the most tools on an 84mm mod Ive ever seen. Excellent job!
Thank you

Coming from a professional modder, that means a lot

Its hard to think of what else you'd be able to add. Pliers would be kind of impossible to add on an 84, so the only other thing you could go for would probably be a metal file/saw. It would work on the wood saw backspring, but youd have to shorten it to fit.
I stopped working on 84s as it was much more difficult than any other size to work on. I still get alot of requests though for cadets with scissors, so someday I'll get back to working on that size.
Yeah, I think the best thing for pliers on an 84 would be to start from scratch, and conjure up something like they have on the Rangers with the triple backspring. Not a job for at the kitchen table though :D It would have been nice to have the metal saw in there too, but that might have been one tool too many. At the minute it's a very good size and weight, and isn't too unwieldy or obtrusive.
I was actually walking around earlier and thought to myself you can't actually tell it's in the pocket.... then I realised it wasn't even in my pocket



-
@50ft-trad said:
I carried it for half an hour before I realised I forgot something :ahhh :ahhhMini-driver for the corkscrew :D Now sorted
;)A quick count up of the features:
Full sized plain blade
Full sized serrated blade
Scissors
Wood saw
Corkscrew
Nail file
Inline awl
Phillips driver
Large flat blade driver
Small flat blade driver
Eyeglasses precision driver
Can opener.... untested
Cap lifter
Wire bender
Toothpick
TweezersI forgot can key :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
