Off-Brand Challenge - ETHEREALICER - Böker City Tool / SWIZA D04
-
Day 1 - Intro
My Boker City Tool had an easy Day 1. Used the blade to open a package, that's all.
However, I disliked the glass breaker so I grabbed a set of pliers hoping I could screw the glass breaker loose. Sadly, I did hurt the glass breaker pretty bad, showing that it is made of really soft metal
Addendum: I noticed on the picture that the core might be different material. Will have to investigate further.

-
I wonder how they attached it then? Maybe try heat in case they used some loctite.
-
Day 2 - NADA
Didn't get a chance to take pictures during the day and I didn't perform anything spectacular anyway.
So I decided to use the scissors to cut a pack of chips (crisps for your UK folks :D). I was shocked at how miserable the scissors performed. I made a full stroke and it barely cut the pack (picture 2).
This is a great disappointment.
Full stroke cut, it is mostly sandwiched between the blades.
I couldn't believe it, so this is the image after TWO cuts.
After quite a struggle I managed to cut through. This was way more effort than it should have been


-
So I took Zoidbergs advice and heated the glass breaker. First it came out a bit then it snapped off...
I could not discern any thread so I think its just a stud glued in. Trying to pull out the rest but despite re-heating I did not manage.I barely touched the outside of the scales and it shows strong abuse.

-
Disappointing performance with the scissors, Beat. Have you tried crinking them, or is it a grind issue?
-
@50ft-trad said:
Disappointing performance with the scissors, Beat. Have you tried crinking them, or is it a grind issue?Yes, very much. The scissors appear to be sharp and I will leave them as they came for now. I will test them more during the course of the month...
-
@Etherealicer said:
...took Zoidbergs advice...Danger! :ahhh Danger!
-
@50ft-trad said:
Disappointing performance with the scissors, Beat. Have you tried crinking them, or is it a grind issue?
Yes, very much. The scissors appear to be sharp and I will leave them as they came for now. I will test them more during the course of the month...
Just needs a few taps with a hammer mate ;) Here's one of the old Sheffield boys at work :)
-
Day 3 - String Theory
On paper I did some bondage
... for recycling of course.
So, cord cutting it was.First up were the Scissors
As you can see, the first cut did hardly any damage to the cord. Had to hold it really tight and still took me 4 cuts to get through.
I also tested to cut the cord using the scissors as a knife and that worked well, so it does not lack in sharpness.
The scissors are good at cutting paper from thin (newspaper, unsupported) to thick (cardboard), so at least some good news.Blade, serrated-blade, awl
The two blades unsurprisingly did very well at this. The awl is also sharpenough to cut cord quite easily, so more good news.


-
@50ft-trad said:
@50ft-trad said:
Disappointing performance with the scissors, Beat. Have you tried crinking them, or is it a grind issue?
Yes, very much. The scissors appear to be sharp and I will leave them as they came for now. I will test them more during the course of the month...
Just needs a few taps with a hammer mate ;) Here's one of the old Sheffield boys at work :)
People who meditate to whale songs are odd... this is what you should meditate to!
I think I will have a go at this later today, maybe tomorrow. It's not like I can ruin the scissors, they come that way from the factory

-
...took Zoidbergs advice...
Danger! :ahhh Danger!
Looking at the result, I can only agree with you :P
-
More Day 3: Redeption
Figured out that the scissors are good for cable-ties and clam-shell package. Overall, I cannot give the scissors a good, because they don't cut cord and soft materials. But they ain't bad.
Also used the blade on some food at a street-food festival.

-
Day 4: The shortest way to a men's heart is though the chest... this blade knows that and has captured my love
Decided, to make pumpkin soup today, so out came the City tool. It got a little help from the T-3000 (remember, Schwarzenegger was only a T-800).
Blade did excellent at cutting the top off.
The T-3000 did brilliant at scraping, but had to use a spoon for cleaning out.


-
Of course a good soup needs some onions and sausage :D.
I have to say, the blade did extremely well at cutting. I might have to admit that I like it a lot. Sadly, that stupid key-ring is extremely pointy and exactly where my pinky finger rest (the shadow tells the tale very well).
What to do with the pumpkin... make a jack-o-lantern of course
What is the best part after a hard day at work? A shower of course. Restrained it to make sure it wouldn't bounce and get damaged unnecessarily.



-
Boring few days, but I promise some interesting tests...
If I had to describe the tool in smileys it wood look like this:
Blade:

Scissors:

Small screwdriver / Finger maimer:

Large Flat: NA
Lanyard Ring:

Glass Breaker:

Scales: NA
Pocket-Clip:

-
Did You test the cock screw?

-
-
Did You test the cock screw?

Yes, the mini-screwdriver from Victorinox does not fit...
Also, I'm so used to pioneers that I tend to forget the backside tools. All I really can say ATM is that the awl seems to be pretty good, of course the position is very limiting.
-
Day IIX: Yesterday, all my troubles seemed so far away...
Got to pack 3 and unpack one package. Still not a fan of the scissors, they had huge trouble with the padded envelopes. This weekend I will hopefully test the scissors on a tin can, lets see if it can match the mighty Classic scissors.


-
Day 1001 part A: ORANJE
Have to spray a box orange to pack some goodies from the Netherlands. The large flat was too big, so I used the TERROR-claw. It is at an awkward angle and not very suitable for prying, but then there was no real challenge here.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login