Swiza SAKs?
-
@Mextreme said:
I do the exact opposite. I find it difficult to get a blade under a strapped zip tie in a safe way, It´s easy to cut what is beeing strapped and since they are from high tensile plastic, quite an amount of force is necessary which is difficult to control so I use nippers if I have them, but scissors are second choice.
On the soft material you mention like thin paper/plastic, padded envelopes ,plasticized bags , I find a sharp blade way faster than scissors.I used to mainly use the heavy duty scissors on a 130mm Wenger for zip ties, but eventually converted to just using a 111mm sak blade. There are a few angles that can work even when the blade can not get underneath it. It often more dangerous and you look a bit crazed, but it is fun and effective.
-
I do the exact opposite. I find it difficult to get a blade under a strapped zip tie in a safe way, It´s easy to cut what is beeing strapped and since they are from high tensile plastic, quite an amount of force is necessary which is difficult to control so I use nippers if I have them, but scissors are second choice.
On the soft material you mention like thin paper/plastic, padded envelopes ,plasticized bags , I find a sharp blade way faster than scissors.I used to mainly use the heavy duty scissors on a 130mm Wenger for zip ties, but eventually converted to just using a 111mm sak blade. There are a few angles that can work even when the blade can not get underneath it. It often more dangerous and you look a bit crazed, but it is fun and effective.
If the zip tie is rather small you can bite of the whole square part, where the zip locks, with multitool pliers but on 6mm (1/4") and wider it doesn´t work. I actually can´t see a safe way to cut zip ties other than the minimal 2-3mm (1/8") in a somewhat safe way with a blade.
I cut a lot of 5-10 mm zip ties and the best are nippers, especially the ACT TL-ACT-MG-1400 that has a special notch that protects cables but sharp thin point scissors with good geometry of the shears are fine. -
See the inner workings here
-
Can we confirm the overall length of the Swiza? Is it more comparable with the 91mm, 93mm or 111mm length?
-
-
Can we confirm the overall length of the Swiza? Is it more comparable with the 91mm, 93mm or 111mm length?
Its a bit an odd shape to measure but its longest dimension (diagonally) is about 96mm. Corner to corner on one side is about 90mm (measured from the middle of the corner).
How is that awl working. Can it drill holes in wood and plastic?
-
Can we confirm the overall length of the Swiza? Is it more comparable with the 91mm, 93mm or 111mm length?
Its a bit an odd shape to measure but its longest dimension (diagonally) is about 96mm. Corner to corner on one side is about 90mm (measured from the middle of the corner).
How is that awl working. Can it drill holes in wood and plastic?
Have patience with all things but first with yourself
- Saint Frances de Sales
:D
I will eventually get to that in my OBC thread
-
Thanks for reviewing these E!

-
No hook?!

NEXT!
-
So its a plastic scaled pioneer with some backtools... what is the selling feature.
Seems pointless to me.
-
So its a plastic scaled pioneer with some backtools... what is the selling feature.
Tweezers?

Except I prefer no T&T. And I like a lanyard ring, so the Swiza is a big fail for me.
Actually, the tweezers are IMHO better than the ones from Vic/Wenger.
Also, as a usually well informed source just told me, there will be one with a wood saw soonish...
-
So its a plastic scaled pioneer with some backtools... what is the selling feature.
Tweezers?

Except I prefer no T&T. And I like a lanyard ring, so the Swiza is a big fail for me.
Actually, the tweezers are IMHO better than the ones from Vic/Wenger.
Also, as a usually well informed source just told me, there will be one with a wood saw soonish...
I wonder if it will be with openers and a saw, or just knife, saw, awl and back tool.
The last one would make an interesting tool. (On paper atleast)Sent from a device made from star dust using tapatalk
-
So its a plastic scaled pioneer with some backtools... what is the selling feature.
Tweezers?

Except I prefer no T&T. And I like a lanyard ring, so the Swiza is a big fail for me.
Actually, the tweezers are IMHO better than the ones from Vic/Wenger.
Also, as a usually well informed source just told me, there will be one with a wood saw soonish...
Plastic farmer eh. :D
-
So its a plastic scaled pioneer with some backtools... what is the selling feature.
Tweezers?

Except I prefer no T&T. And I like a lanyard ring, so the Swiza is a big fail for me.
Actually, the tweezers are IMHO better than the ones from Vic/Wenger.
Also, as a usually well informed source just told me, there will be one with a wood saw soonish...
I think that kindof makes Syph's point. I don't think it will transition well from its soft-scale, albeit scissorless, urban carry to the tougher outdoors. But at least it has improved tweezers to remove the splinters

Don't think my Evo18 is going to lose any sleep.
-
@Syph007 said:
So its a plastic scaled pioneer with some backtools... what is the selling feature.Seems pointless to me.
Locking blade I think will draw some buyers and the deceptively ergonomic design.
As Etherealicer pointed out the tools are quite protruding and the ergonomics is just a mirage.
The lock button built in the scale is quite low key and attractive but I have no idea if it´s any good. -
This is really interesting. Although I can't see the company lasting long.
-
So its a plastic scaled pioneer with some backtools... what is the selling feature.
Seems pointless to me.
Locking blade I think will draw some buyers and the deceptively ergonomic design.
As Etherealicer pointed out the tools are quite protruding and the ergonomics is just a mirage.
The lock button built in the scale is quite low key and attractive but I have no idea if it´s any good.Maybe that's the niche they are trying to fill then, lock blade? Its a detractor though as far as potential market as many countries dont allow lockblade carry.
Its not one hand open though, so should be legal in Germany and similar countries.
-
I consulted with my 80s hero...

:D
Ok ok if they last 125 years I promise I will buy one.

-
So its a plastic scaled pioneer with some backtools... what is the selling feature.
Seems pointless to me.
Locking blade I think will draw some buyers and the deceptively ergonomic design.
As Etherealicer pointed out the tools are quite protruding and the ergonomics is just a mirage.
The lock button built in the scale is quite low key and attractive but I have no idea if it´s any good.Maybe that's the niche they are trying to fill then, lock blade? Its a detractor though as far as potential market as many countries dont allow lockblade carry.
Its not one hand open though, so should be legal in Germany and similar countries.
No, but you can OHO the can-opener :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
