THE SHAVING THREAD!!!!!!
-
@Gareth said:
I've had a similar experience with a shavette. I'm sure it can be done better with a bit of practice though. Might have to give it another try. Good to hear you're still in one piece Al. :DCheers mate :D it did work, and was a reasonable smooth shave on the front and neck (needs practice under the jaw though), it just felt a bit abrasive. I'll try switching the blade next time, and possibly giving it a bit of a strop.
-
@temo said:
Yes I think it was a safe choise to stop filming and start using both hands and focus only for shaving :) Have done some times after video and no bigger accidents so okay if you pay attention. Though start was scary, specially first times.I'm certainly not ready to try filming it at the same time :ahhh :ahhh
:D
-
@50ft-trad said:
I've had a similar experience with a shavette. I'm sure it can be done better with a bit of practice though. Might have to give it another try. Good to hear you're still in one piece Al. :D
Cheers mate :D it did work, and was a reasonable smooth shave on the front and neck (needs practice under the jaw though), it just felt a bit abrasive. I'll try switching the blade next time, and possibly giving it a bit of a strop.
Ive read that the shavette is a totally different shave compared to a true straight razor, but once you get the technique down, straights are a breeze... so I've heard :D
-
Yeah, apparently straights can be easier because of the weight. However, shavettes don't penetrate as deep if you get it wrong as there's less blade exposed :ahhh
I'm still getting over the fact I actually tried it and got away with it

As i've just ordered some scales materials in for a few projects, I might have a look and see if any would be suitable for my straight. The existing scales are perfectly fine, but boring :P I'll have to examine them when they come in, and see what materials would look best on which project
-
I'm going to shave tonight with a straight razor for the first time. I got the Utopia stainless steel razor with 100 disposable Derby Razor's. Wish me luck. [emoji30]
-
Good luck mate!

Don't forget to count your ears afterwards :D
-
Thanks guys.. Any tips for a newbie?
-
Light to no pressure and good lather! It pays to practice creating lather even if you are not shaving so you can get the consistent, protective lather that is needed.
Also take it slow and I sugguest no XTG (across the grain) til you get some shaves in. With a straight, start out by just doing you checks and easier areas til you get a feel for it and the razor. Typically the neck and chin/jaw line take a bit of practice with both DE and straights!
-
Thanks man! I'll give it a try tonight
-
What is DE?
-
I'm using a safety razor (or DE=double edge) on my head, and am a newbie as well. I'm learning that its not what you have as much as it is technique. I found some pretty good videos on y.t. Check out how actual barbers do it :D they gotta do it for a living, so what they do works
-
Yeah, sorry! DE is double edge or Safety razoro as JBW1 stated.
if you are going to start with that the easiest way to find the correct angle is to hold it 90 to your face with the top cap on your face, then slowly drop it down til you feel the blade touching your face and that should be the angle for you to use when shaving.
With straights you can do a similar thing but hold it like parallel to your face, then start tilting it outwards til you feel the edge touching your face and again, you have found the angle.
Again as JBW1 stated, there are lots of videos out there that are well known shavers that give tutorials for everything from finding angle, creating lather (but don't get hung up on super suddy's crap cause that is over rated as it just has to be a good protective lather that helps glide the razor without irritating the face. Too much pressure will also irritate the face.
If you don't have an "alum block" and/or a steptic pencil, I suggest getting them both. The alum block is used to calm down a raw/irritated face and to slow down/stop bleeding and the steptic pencil is also to stop bleeding but to me it works better if you have a bigger cut or one that just doesn't want to stop bleeding!
-
I survived!
-
No cuts or nicks, I found under my nose and around my lips the most scary. I did notice a general razor burn all over my face.

-
I believe you are correct
-
@JBW1 said:
I'm using a safety razor (or DE=double edge) on my head, and am a newbie as well. I'm learning that its not what you have as much as it is technique. I found some pretty good videos on y.t. Check out how actual barbers do it :D they gotta do it for a living, so what they do worksErr, a safety DE on the head,, this ought to be interesting.. I started shaving the dome with just a normal razor, but then switched to a headblade, stuck with it ever since. I also switched to a safety on the face and well, best I've ever had, but idk about the safety on the head? How's that working?
JR -
Agree that shavette is a bit different compared to straight razor. At least I do long moves with straight razor but with shavette need to be more careful. And use both hands (tighten the skin with other, shave with other). So straight razor slides better and edge is longer. With shavette I do small area at time usually with short strokes. With straight razor I have done a long strokes. Though I have not used shavette a lot. And still I have done more nicks with shavette, with straight razor almost none. Though nothing big with shavette but some you can feel and see.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login