SOG Switchplier 2.0 running review
-
SOG aren't exactly renowned for having the worlds best can opener ;)
From a carry perspective, my only issue is the lack of grip. The tool seems to have enough purchase in hand, but despite the reasonably strong clip, the tool doesn't have much traction when clipped to a pocket due to the smooth finish.
You seem to have based your views on the tool pretty much on one function so far. Is this because it's the only function you've used? Are you using a standard load out, and do you have any thoughts on the other features of the tool yet?
-
This was the first use of the can opener and I think the solution might be to move the tool itself closer to the side and to sharpen it. That might fix it.
So far this is the standard load out.
The screwdrivers have seen some minor use as did the pliers but nothing spectacular and no pictures. The Phillips did work well on screws that were in PVC and had some bonding agent on them (either Loctite or something similar). However the sample size is too small to form any sort of an opinion since the sizes of Phillips and the materials they are being screwed into or out of can vary a lot.
Cans on the other hand just have different sizes and I have found the larger ones to be easier to open than the smaller ones hence the lack of optimism.The pliers were used in a spectacular fashion to grab something hot and put it to the side. While they did the job I don't think that would qualify as having an overwhelming amount of experience with them.
I didn't have a lot of problems with the tool staying in the pocket.
-
In that case I look forward to future updates
:D
-
Had a chance to give a good running to the bottle opener because after a hard day's work some of us enjoy a cold brew. It took a bit of getting used to (read 1 beer) because I think it is more shallow than the Vic bottle opener. I'll take some comparison shots tomorrow to confirm this. All in all it worked very well.
My friend tried it too and was impressed by Switchplier's opening mechanism and even participated in my the tool pic snapping craziness as you can see
-
Yo! What gives? I was just getting into reading about your experiences and then the abrupt end of the thread. :D Any updates for us?
I got a SP2 around the same time you did, and have carried it a lot. I like it, too, but have really only used it in pretty much the same applications that you have described so far.
-
My job pretty much killed this. Can't really take pics.
However I can say what the tool itself has survived since September:
- Taking apart and putting together furniture
- Taking apart and putting together the copy machine
- Battling with a stapler
- Being used as pruning shears
- Pulling staples out of my hand
- Pulling splinters out of my hand
- Peeling and cutting fruit
- Cutting one of those mechanic's keyrings
- Rescuing a LM that got stuck cutting the aforementioned keyring (Wave head)
- Cutting calluses (although not filing them)
- Scaring a kid to go to the dentist (that spring opening is fun)
So far I would say that there are some detriments (can opener!!) but as an edc bag tool it has performed wonderfully.
Would I change anything about it, besides the can opener? My personal preference would be to exchange the blade for a dedicated fully serrated one with a sheepsfoot or wharncliffe shape since this is a working tool and the idea of using it as a dedicated knife is not something that I find appealing -
I mean exactly that
-
Thanks for this great review styx! And I'm really digging that sheep's foot blade
I actually don't have any of those in my spare parts bag. -
@styx said:
My job pretty much killed this. Can't really take pics.However I can say what the tool itself has survived since September:
- Taking apart and putting together furniture
- Taking apart and putting together the copy machine
- Battling with a stapler
- Being used as pruning shears
- Pulling staples out of my hand
- Pulling splinters out of my hand
- Peeling and cutting fruit
- Cutting one of those mechanic's keyrings
- Rescuing a LM that got stuck cutting the aforementioned keyring (Wave head)
- Cutting calluses (although not filing them)
- Scaring a kid to go to the dentist (that spring opening is fun)
So far I would say that there are some detriments (can opener!!) but as an edc bag tool it has performed wonderfully.
Would I change anything about it, besides the can opener? My personal preference would be to exchange the blade for a dedicated fully serrated one with a sheepsfoot or wharncliffe shape since this is a working tool and the idea of using it as a dedicated knife is not something that I find appealingOh man, bummer. Well, it sounds like you have put it to some tough tests. Glad to hear it has been as useful on bigger tasks (COPY MACHINE!?!?) as it has been for me on smaller ones.
Also, friendly reminder: don't staple hand

:D
-
well that's what happens when your IT department is full of lazy bums (they are supposed to take care of the copy machines)
I'd actually like to run the SP2 through even more home repair stuff and DIY projects since that's where I see it as most useful. In many ways it falls in some void between the medium sized tools like the Rebar and Spirit and the smaller Juice line in my eyes
-
@styx said:
well that's what happens when your IT department is full of lazy bums (they are supposed to take care of the copy machines)I'd actually like to run the SP2 through even more home repair stuff and DIY projects since that's where I see it as most useful. In many ways it falls in some void between the medium sized tools like the Rebar and Spirit and the smaller Juice line in my eyes
Agreed. I sort of look at it as being in the same category as Wingman or Sidekick. I took the awl and file out of mine and put scissors in their place. It's very similar in capability to my Wingman, but more comfortable, all locking tools, lighter, etc...
-
well that's what happens when your IT department is full of lazy bums (they are supposed to take care of the copy machines)
I'd actually like to run the SP2 through even more home repair stuff and DIY projects since that's where I see it as most useful. In many ways it falls in some void between the medium sized tools like the Rebar and Spirit and the smaller Juice line in my eyes
Agreed. I sort of look at it as being in the same category as Wingman or Sidekick. I took the awl and file out of mine and put scissors in their place. It's very similar in capability to my Wingman, but more comfortable, all locking tools, lighter, etc...
Double yes to both statements. The switch plier is very compact yet capable. I would expect it to beat the wave or powerlock but it is a great tool in its class. and it has a great fidget factor [emoji4]
-
Must resist the dark side....
-
Why?
-
Come join us
-
Bring chocolate
-
@HarleyXJGuy said:
Must resist the dark side....Join us!
Might as well cross over completely, you already have a Surge. And the dark side has cookies. -
Ooooo, I want one now too. Drop the can opener for the scissors if possible.
Sent from my XT1563 using Tapatalk
-
I think the scissors are a bit long to replace the can opener.
Having said that, this is the tool for both of your Harley and JP. Search your feelings, you know it to be true.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
