Livarno, Romisen, C8, Small Sun cheap HID torches
-
You do not have to tell me twice

-
rofl
-
rofl
-
OK, so after some time I got some lights to give as stocking fillers, though I may keep some for myself.
1st the Nitecore tube, for about $6. There are several proper reviews of them around the forum, by the way.
I got a black, a blue and a pink one.
Specifications:
Max Output
45 lumens
Max Beam Distance
24 m
Max Beam Intensity
150 cd
Max Run time
48 h 0 m / 2 dLED
High performance LED ???
Battery
Rechargeable Li-ion
Beam color
White light
Length
56.5 mm / 2.22 inHead Size
21 mm / 0.83 in
Weight
9.6 g / 0.34 oz
You have the option of 1Lm, 45 Lm and through a "secret" menu the option for various setting between these, something that does not seem too useful/clever.
The light will go from low to high, but, it will not stop at high and instead it will start from low again.
A 3rd, 10 Lm, fixed mode, would have been more useful, but less gadgety.There is an instant turbo mode, from off, if you keep the button pressed,which is just the 45Lm mode, faster/tactical.
It comes with two different sized key rings
It is small, not minuscule, but small.
Here is a comparison picture with a classic

and another one

and one with the definitive SAK

It is light but it does not feel flimsy
The packaging does not say much about charging, but it has the usual USB charging port most phones and tablets have nowadays, microusb, so charging it will be easy.
You connect it, a blue light comes on, and when it goes off it is charged.

The charging port is covered with a rubber cover.
Inside the light you see the battery, which remind me of LiPo batteries used in RC cars/toys, rather than of a LiIon battery.

The wires are also visible

The beam is floody and at small distances it has a weird shape

However, it is bright enough
Compared with the Ultrafire A3 (on high), which produces around 100Lm

on Low there is a difference

but on high not so much

Also compared with another, floody, light

A good buy, which has the backing of a proper company.
-
2nd, something cheaper, $0.70.
I am sure replacing the battery will cost more..It comes in carious colours, and you need to keep the switch pressed for it to give out light (shown here next to a proper SAK :P :D )

Compared with the nitecore above (low)

again (high)

Less bright, but decent. It seems to give out about 20Lm.
and compared with a "police" AA light

A classic keychain light, a lot more useful in reality than a fancy multi mode lumen monster

-
BLF Special edition, A6 XPL
Specifications
Product name: BLF A6 CREE XPL Non-anodized EDC LED Flashlight
Brand: BLF
Model: A6
Emitter Brand CREE
Emitter Type: XPL
Circuit Driver: A17DD-L FET+1 Driver
Light Tint: 3D (5000K), 1A (6500K), 5A(4000K)
Material: Non-anodized
Mode: Group 1:Moon-Low-Med1-Med2-High1-High2-Turbo(Short press<0.5s)
Group 2: Low,Med,High,Turbo (Short press<0.5s)
+
Moon-Turbo-Tactical Strobe-Battcheck-Bike Flasher (Medium press 0.5s-1.5s)Battery Configurations: 1 x 18650 battery (not included)
Switch Type: clicky
Switch Location: tail of the flashlight
Impact Resistant 1 meter
Max Output: 1600lumens (max) (use 18650 protected power battery)
Working Voltage: 2.8-4.35v
Lens: Toughened ultra-clear mineral glass
with anti-reflective coating
Reflector: Orange Peel Reflector
Carrying Clip included
Waterproof: IPX-8 waterproof 2 meters
Color: Silver
Weight: 80g without battery
Size: 120mm x 24mm(length x body diameter)A good looking torch

Special driver, limited edition with branding on the pill. XPL emitter.

Feels solid and is well finished.

compared with another 18650, small light


came with some accessories

Solid clip

OP reflector

Compared with the Olight S80 on full
The A6 is definitely brighter
It is also brighter than the SA22
Not as bright as the TR 3T6

Clever modes, reasonably easy to use
Battery level mode :)
Bright but not for long.
The light goes off max after less than a minute.
Even so, it gets hot quickly.
In summary, the main problem with it is that it gets hot quickly and switches to minimum.
I was replacing a socket at nigh in dark room, and after about 5 minutes (including the automatic stepdown) it got so hot it went to minimum, leaving me basically in the dark.
The light is definitely bright but it gets too hot very quickly even in cold weather and uses up power fastly. (Panasonic unprotected, 3400mAh)
It should work better as a bike light, with the wind providing additional cooling.
PWM is not noticeable and the battery check mode is a good addition.
-
Blackwater Kite, 140Lm, rechargeable (several brands/finishes available)
Two mode twistie


Size comparison



Taken apart




Compared with the Tank007 E09
Both on high

and both on low

The light volume is similar, but the E09 has a better throw
The anodising is OK but not as goo as that of Fenix, Olight etc. No missing anodising.
Charging

It charges via a standard micro USB wire. There is a red LED indicating charging, which turns to green when it is charged.
The included battery gets charged to 4.2V before the charging stops. A good, safe, voltage.
Because of its size it does not fit in my chargers, but can be charged using suitable wires, if needed.The battery capacity is low, as expected.
NOTE : to charge it for the first time you need to take off the bottom battery cover and remove a plastic insulator that is included, to protect the battery from turning on during transport
The charging USB socket seems good enough.
**
Is this a good replacement for an AAA light?**
Definitely the brightness is similar.
Smaller.
It stayed cool enough.
PWM was barely noticeable (much better than the E09)
The Capacity is much lower and I doubt you can get 30 minutes on high. The voltage drooped significantly after little use (my testing period).The question is whether it is easier to find AAA batteries or a micro USB charger. They are both common enough, but in a power cut the AAA option will win.
-
Thanks for the awesome and quick review !
on Monday I'm definitely going to our post office to check if something hasn't arrived but they failed to notify me. it's been over a month already.
-
Hm, so only the two modes, low and high?
I like the integrated charger option, one of the reasons I haven't yet pulled the trigger on similar lights. I have a Quantum D2 that uses these cells and have thought of buying a few of these to give away as gifts but the chargers I found were all too pricy for what they were.
-
The charger seems to work OK. I would have been happier using other chargers, but the cell is too small. I have to see if it fits in my low end liion chargers.
-
I know Ric from cnqualitygoods used to sell spacers for them to fit regular chargers. Can't remember what his new site is.

-
I thought he run two sites. Really, with over 20 micro USBs around the house, the cars etc. I do not see me bothering with a charger :D
-
Thanks for the review mate. I rather like the look of that.

-
And since mine hasn't arrived yet, I'm so freakin tempted to buy an Olight S15 Baton or whatever the name exactly was

-
ThruNite Ti CREE LED
I do not know if a titanium alloy torch can be considered budget, but I have left this thread all alone for too long.
I wondered into BLF, started looking at titanium lights, and ended up buying this, mainly for the impressive output, from such a small light.
The cost was around 30Euro, to my door.This is the premium version of the ThruNite AAA lights, but, what I liked was than instead of just giving it a Titanium body, whilst keeping the rest the same as with the other models of the series that cost a lot less, they changed the LED to an XP-L Cree, which gives out 162Lm, from a regular battery, as opposed to the 120ish of most other lights, from LiIons.

It comes in a simple box, with a spear rubber gasket, a pocket clip and a key ring attachment.
Specifications, from the manufacturer:
Small but powerful one AAA flashlight, max output up to 162 lumen.
Four output modes: firefly, low, high and a hidden strobe.
LED: Cree XP-L V4 LED with a lifespan of 20+years of run time.
Battery: 1 AAA battery (Working voltage: 0.9-3V)
Dimension: 70mm(length)14mm(head diameter)
Weight: 16 gram without battery.
OP Reflector give perfect flood.
Titanium alloy(TC4) body with polished finish.
Waterproof to IPX-8 standard.
Convenient twist switch for one hand operation.
Output and run time:
** - Firefly: 0.5 Lm(115h),
- Low: 12 Lm(6.3h),
- High: 162Lm(0.5h),
- Strobe:162Lm(1 hour)*The mode memory is unusual. Basically, if you do not switch the light on in 10 seconds, it always starts on low
It looks nice, polished, though the weaker LUMINTOP looks nicer, at least in photographs.
The finish was fine but the threads needed a bit of cleaning – now it works very smoothly.

The comparison is done with the Tank007 E09, on LiIons. The Thrunite is using an alkaline battery, as I expected the higher initial voltage to give it a brighter light.
They have similar size.
Even though the thrunite is not supposed to use LiIons, it has been tested with them, in other forums, and it works fine, getting very hot. The emitter is similar in output to an XML one, but smaller.
Both on high, the Thrunite is on the left.


By using it here and to illuminate various objects the thrunite produces the same intensity as the Tank007, but in a larger area- like using several Tank007s together to illuminate a larger area.
The thrunite has an OP reflector- the Tank007 has a polished, thrower style, one.
The beam is smooth and looks clean. It is supposed to be cool white.
Overall, it is an impressive light, both in quality and in output. It does dwarf the light of other AAA lights.
It will be nice to see the same driver and LED in aluminium lights, for 10, 15 euro. -
Archon V10s
Lower cost range of proper dive lights. Very good construction and finish. It is advertised as red but it was more purply
Around 25 Euro.
From the manufacturer:◆Bulb: CREE XM-L2 U2 (Max 860 lumens)
◆Output levels: high > low > SOS
◆Waterproof: 60 Meters underwater
Double O-rings, Battery level indication, nice squared threads, smooth operation, nice, hefty feel.
Only two modes, so no confusion (and SOS)
Easy to operate under water and produces a very nice uniform beam, good for seeing and videoing whilst diving
A definite improvement over the plastic (usually yellow) diving lights, for not much more - Save your money and buy this instead of the really cheap ones (hint- they will leak easily)
Will also make a prety decent regular light for use in the rain, mud, dusty environments
-
Archon W1A
A prety decent and clever Diving light
Clips to the strap of your mask and stays there securely. Around 15 Euro
From the manufacturer
◆Bulb: CREE XP-E R3 LED (max 75 lumens)
◆One output level: high only
◆With diving mask clip◆Waterproof: 100 Meters underwater
Very nice construction and finish.
Works very well, only one mode which simplifies things.Because it is a twisty you have to be careful not to twist it too much when switching off as this will affect the water resistance.
I suggest that you just leave it on throughout the dive and only switch it off after a wash with fresh water.
It could also be useful when there is a lot of rain/mud/dust
Takes only regular AAA batteries - No Lithium Ion batteries.
-
Thorfire BLF Q8
I like the BLF models and have bought a few of them in the past
This can be had for 37Euro including shipping.
Considering that it has 4 XPL emitters and a realistic 5000Lm output it can be considered as a low cost, good value light.This arrived in a good but plain cardboard box which contained a spare button and some spare gaskets.
It has the Can format which makes it short and stout. The 4 18650 batteries are in parallel.Because of this it can be run with any combination of 1 to 4 batteries but 4, button top, ones re needed for best performance. I used 4 protected Panasonics, as I wanted 4 same button top batteries (it works with flat tops too, but you re not sure if +ve poles re touching the conducting plate.
It uses a ramping system, where you start from low and as long as you keep the power button pressed it will slowly go to maximum (you can stop at any brightness) You can go from high to low the same way - plenty of reviews in BLF for this light. This is the latest generation model, with better QA/QC.
It has a tripod mount and small green light stays on in the button when it is off, so that you can find it.
Comparison beam shots with the Trustfire TR-3T6 3XML emitter model (on 2 18650, but it can take 3 with the extension tube) and the BLF A6 single XPL model . These are both very bright lights.
-
.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
