LM Signal mod
-
A flashlight!!!!
-
What I liked about this is the challenge, taking something and making it work for you. Yes I agree thier are much better "survival" tools out there and I have a bunch of them all ready, this is just something to pass the time and see what I can come up with.
-
The awl is odd and bull, must be reprofile, but the thread hole on it makes it difficult to do.
Pliers handles are wide, I am not sure if I should grind down the handle or pliers stop.
Screw driver is awkward to use, not sure how to address that. -
Maybe just replace the awl like from a rebar, have to look at one again. I have only used the screwdriver once but I had the handles open like a screw gun and only turned a quarter turn at a time, wasn't to bad. As far as grinding down the plier stop, mine close on the jaws so you would loose the serrations. I did bevel the tip of them to look like the skeletool, I don't like the looks of the flat tip.
-
It's been such a long time since I've visited MT.O, but the Signal caught my eye as a "super Skeletool" sort of thing.
After seeing this thread I had to get in on the scissor action :)
Thanks for the inspiration!

-
Welcome back!

What's new in the flashlight world? :)
-
What's new in the flashlight world? :)
I dunno! I've been pretty lousy on all the forums recently. 3 kids and a new house will do that to you :)
I gotta say, after taking off all the yellow bits and adding the scissors, the Signal is starting to show it's hidden abilities...
-
This dude stacked the blade and saw on top of each other. Not sure why they couldn't share the top pivot. What tool's spot is the saw taking on that bottom pivot...the awl? Any of you Signal modders have thoughts on this one?
-
Cool Mod !
-
G'Day,
A question to the Signal Modders:
Will a Wave scissors fit inside the tool in place of the Awl? It is difficult to judge from the stock pictures and I don't have one...yet
Cheers,
Pete
-
A question to the Signal Modders:
Will a Wave scissors fit inside the tool in place of the Awl? It is difficult to judge from the stock pictures and I don't have one...yet
Cheers,
Pete
Hm, I am not sure on that one. It doesn't look like much could it there based on the size and shape of the spot. Hopefully the pics will help you visualize.


Sent from my SM-G920R4 using Tapatalk
-
Been away for a while, just popped in to see whats new.
Monrogue, how is it that the plastic piece on your file is red when al I've seen are yellow ones?
Haven't gotten back to any more mods on mine yet.
-
Does anyone know if the small tools from any other Leathermsn models can be swapped right in to the Signal with minimal effort?
-
@Tooltime said:
Been away for a while, just popped in to see whats new.Monrogue, how is it that the plastic piece on your file is red when al I've seen are yellow ones?
Haven't gotten back to any more mods on mine yet.
Hey welcome back[emoji2]
I dyed them using liquid rit dye.Sent from my SM-G920R4 using Tapatalk
-
@Monrogue said:
Hm, I am not sure on that one. It doesn't look like much could it there based on the size and shape of the spot. Hopefully the pics will help you visualize.Thanks Mate,
The pictures do help.
Is there are physical reason that stops the inner tools from being swapped around? I think the scissors is longer than the screwdriver or awl, it is on the Charge. Maybe put the scissors where the bit driver is and move the bit driver towards the screwdriver and remove the awl? It is difficult to imagine without holding the tool. ;)
Cheers,
Pete
-
Hm, I am not sure on that one. It doesn't look like much could it there based on the size and shape of the spot. Hopefully the pics will help you visualize.
Thanks Mate,
The pictures do help.
Is there are physical reason that stops the inner tools from being swapped around? I think the scissors is longer than the screwdriver or awl, it is on the Charge. Maybe put the scissors where the bit driver is and move the bit driver towards the screwdriver and remove the awl? It is difficult to imagine without holding the tool. ;)
Cheers,
Pete
Yeah I'm not sure
It may be possible. I'm no expert on the inner tools on MTs as I haven't dabbled in that yet. Here's another picture with the tools out.

Sent from my SM-G920R4 using Tapatalk
-
@Monrogue said:
Yeah I'm not sure
It may be possible. I'm no expert on the inner tools on MTs as I haven't dabbled in that yet. Here's another picture with the tools out.I think you are right, it MAY be possible. Judging from where the scissors are on the Charge, one will have to move the bit holder over. The scissors thumb tab is off to the right if looked at the same angle as you opened the Signal so it cannot go where the awl is.
Thank you again for the pictures. I am going to see if I can have a quick look at it when I take a Leatherman in for a warranty repair next week.
Cheers,
Pete
-
Yeah I'm not sure
It may be possible. I'm no expert on the inner tools on MTs as I haven't dabbled in that yet. Here's another picture with the tools out.I think you are right, it MAY be possible. Judging from where the scissors are on the Charge, one will have to move the bit holder over. The scissors thumb tab is off to the right if looked at the same angle as you opened the Signal so it cannot go where the awl is.
Thank you again for the pictures. I am going to see if I can have a quick look at it when I take a Leatherman in for a warranty repair next week.
Cheers,
Pete
No problem man, glad to be of help[emoji2]
I look forward to your thoughts after getting to handle one.Sent from my SM-G920R4 using Tapatalk
-
@Monrogue said:
No problem man, glad to be of help[emoji2]
I look forward to your thoughts after getting to handle one.G'Day Monrogue,
I had a look at the Signal today. I do like it, I must admit. I think the size is perfect for my needs and carry weight. I also had a good look inside, but I think without taking the tool apart I can merely speculate whether a scissors will fit. I think it might, big might. All depends on the clearance with the scissors thumb tab and the pin inside the handle. I am going to get one at some stage and then will try the mod.
Cheers,
Pete
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
