Gerber Mp600 owners club ;)
-
Just outta the box, didn't even clean the grease off yet!


Is this your first flicky? It's addictive to flick them [emoji6]
That it is. I've annoyed bosses quite a bit flicking at work. >:D. Very nice SAK Guy!

Yes Monrogue!

Thanks JD! I'm working on my technique! :D
With the tool flat, hold the end of the outside handle. Give the tool a sharp flick to the outside with your wrist, and the pliers will pop out.
-
I'm joining with another entry; just placed the order for a MP600 Pro Scout yesterday. My other one is the MP600 bladeless.
@lowtech said:
The problem being is that it´s hard to find U-shank blades in general and ones with the hole and adequate thickness even more so. At least here in germany.
If you have a good source, let me know.We have a good selection of Bosch U-shank blades here in the US. Maybe not quite as many as T-shank but enough to have something useful. If you want some badly enough to ship them from the US, drop me a PM or email and I'll go pick some up for you.
I went for the PS because it is US-made and I like the tool combo and the fact that it has the old style wire cutter.
-
@jerseydevil said:
With the tool flat, hold the end of the outside handle. Give the tool a sharp flick to the outside with your wrist, and the pliers will pop out.There's also the other way, the way that Leatherman recommends for their models with the slide-out pliers.
Hold with the thumb and forefinger on the release buttons, with the tool handles down. Then press the buttons and flick it downward, so the handles drop away from the plier head.
Since the handles with tools are heavier than the plier head, this method works with a lot less speed and force, it's more reliable for me.
-
With the tool flat, hold the end of the outside handle. Give the tool a sharp flick to the outside with your wrist, and the pliers will pop out.
There's also the other way, the way that Leatherman recommends for their models with the slide-out pliers.
Hold with the thumb and forefinger on the release buttons, with the tool handles down. Then press the buttons and flick it downward, so the handles drop away from the plier head.
Since the handles with tools are heavier than the plier head, this method works with a lot less speed and force, it's more reliable for me.
True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
-
With the tool flat, hold the end of the outside handle. Give the tool a sharp flick to the outside with your wrist, and the pliers will pop out.
There's also the other way, the way that Leatherman recommends for their models with the slide-out pliers.
Hold with the thumb and forefinger on the release buttons, with the tool handles down. Then press the buttons and flick it downward, so the handles drop away from the plier head.
Since the handles with tools are heavier than the plier head, this method works with a lot less speed and force, it's more reliable for me.
True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
Same here[emoji16]
Sent from my SM-G920R4 using Tapatalk
-
I have a Pro Scout with a chipped flat driver and the plier tips that have become misaligned. Do you guys think Gerber would cover these under its warranty?
--
@jerseydevil said:
True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)I love flicking the pliers outward. It just feels awesome. The multitool equivalent of

and you can't do it with a Leatherman! That said, I worry that they'll get too "loose" if I do this (rather than using the slider buttons).
-
@NetsNJ said:
I have a Pro Scout with a chipped flat driver and the plier tips that have become misaligned. Do you guys think Gerber would cover these under its warranty?--
True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
I love flicking the pliers outward. It just feels awesome. The multitool equivalent of

and you can't do it with a Leatherman! That said, I worry that they'll get too "loose" if I do this (rather than using the slider buttons).
Wait, are you flicking it open without depressing the buttons? That shouldn't happen.
Gerber should cover your Pro Scout. More than likely they will just send you a new one.
-
I have a Pro Scout with a chipped flat driver and the plier tips that have become misaligned. Do you guys think Gerber would cover these under its warranty?
--
True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
I love flicking the pliers outward. It just feels awesome. The multitool equivalent of

and you can't do it with a Leatherman! That said, I worry that they'll get too "loose" if I do this (rather than using the slider buttons).
Wait, are you flicking it open without depressing the buttons? That shouldn't happen.
Gerber should cover your Pro Scout. More than likely they will just send you a new one.
Mine works that way...the buttons only have to be depressed to retract the pliers.
-
I have a Pro Scout with a chipped flat driver and the plier tips that have become misaligned. Do you guys think Gerber would cover these under its warranty?
--
True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
I love flicking the pliers outward. It just feels awesome. The multitool equivalent of

and you can't do it with a Leatherman! That said, I worry that they'll get too "loose" if I do this (rather than using the slider buttons).
Wait, are you flicking it open without depressing the buttons? That shouldn't happen.
Gerber should cover your Pro Scout. More than likely they will just send you a new one.
Mine works that way...the buttons only have to be depressed to retract the pliers.
Yeah, and all the Gerber instruction manuals I've seen actually recommend you do it that way. That's probably why they don't have a lock to keep them closed.
-
Huh. I just had a look at all my Mp series tools. You're right, theres nothing but friction preventing the pliers from opening. I cant believe I didn't notice that before.
-
@NetsNJ said:
I have a Pro Scout with a chipped flat driver and the plier tips that have become misaligned. Do you guys think Gerber would cover these under its warranty?--
True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
I love flicking the pliers outward. It just feels awesome.
and you can't do it with a Leatherman! That said, I worry that they'll get too "loose" if I do this (rather than using the slider buttons).
You can most certainly flick out the pliers on the OHT. Did it all day at work today.
-
@sLaughterMed said:
Huh. I just had a look at all my Mp series tools. You're right, theres nothing but friction preventing the pliers from opening. I cant believe I didn't notice that before.OK, Turn in your Man Card.
-
Huh. I just had a look at all my Mp series tools. You're right, theres nothing but friction preventing the pliers from opening. I cant believe I didn't notice that before.
OK, Turn in your Man Card.
:-\ But then how will I get into the Man Club?
Seriously though, I always just depressed the buttons before flicking. Never even occurred to me to try it without.
-
I have my first flicky tool on the way.
Sellers Pics


-
Nice, Blunt nose pliers with the standard cutters. Great catch
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

