Leatherman SIDEKICK / WINGMAN Owners Club
-
However, I am confused by the price difference between the Sidekick and Wingman. I would have expected them closer, with Sidekick being lower value to match or just a few dollars more.
Any insight shared will be appreciated.
The Sidekick is usually but not always also sold with a leather sleeve/pouch/sheath and a small carabiner clip with a 1/4" hex and bottle cap opener. That's why you typically see the Sidekick sold for about $10 USD more than the Wingman.
Even cheaper yet is the Rev... which really, has no reason to exist at all and needs to be discontinued.
Thank you, had never seen a Sidekick in a store with those two items.
I picked up REV a few months ago after a tip on another forum the HD was clear envying for under 20.
Then I stumbled upon a SuperTool 300 at the L store for less than 40, and then a Wingman for 21 at another HD in May.I like to use the tools I buy and must say, the REV did not cut it and is at home in knife box.
The ST3 is often carried, more so since I picked up a box sheath.
The Wingman is in my tool bag and I like the spring loaded pliers and scissors. So I picked up 2nd on but it still packaged for future gift.Me, the knife blade is not critical as I always have 3 1/4" blade with me in some form.
I do like a saw and a good full serrated blade, that why the ST3 finds time at work by my side.
The Sidekick to me seemed on par with the wingman, yet LM hand a different pecking order.
I am learning about these handy tools, just not a collector (yet), but am curious.
Sent from my iPhone using Tapatalk
-
New to the site, just got my wingman today! I'm hoping I can relocate the belt clip and replace the two screwdrivers with the LM bit driver. Might try to replace the file with something else as well.
-
Welcome to the boards matt.

-
Can I join?

-
@matt31084 said:
New to the site, just got my wingman today! I'm hoping I can relocate the belt clip and replace the two screwdrivers with the LM bit driver. Might try to replace the file with something else as well.Welcome to the forum Matt.
Sounds like a good modification there, we'll need to see some pics when it's done. 
-
@sLaughterMed said:
Can I join?

Does half a MT give you half a membership?
I still really like these mods and can't believe that LM themselves haven't started doing them themselves. I'm never going to buy a Rev, but I would be tempted by one of these. -
@sLaughterMed said:
Can I join?

I love the Sidekick knife mod

-
New to the site, just got my wingman today! I'm hoping I can relocate the belt clip and replace the two screwdrivers with the LM bit driver. Might try to replace the file with something else as well.
Welcome to the forum Matt.
Sounds like a good modification there, we'll need to see some pics when it's done. 
Welcome to the forum Matt
+1 on the pics when you finish your mod 
-
@sLaughterMed said:
Can I join?

Wild! It's awesome. Kinda like a leatherman SAK.
-
@Dan B said:
Interesting. What did that pocket clip come off of, or is it a generic one? Also, does it work better than the standard one?The clip was from a cheap Karambit folder.

It works better than the standard one (for my uses and preferences) because it is deeper carry, and I have less people bother me about what's in my pocket.


When on the beach, for instance (my swimsuit is black and the clip doesn't shine and reveal the tool)

-
Uuuuhhh

-
Sorry buddy hope you can get that clip situated

-
Sorry buddy hope you can get that clip situated

It's constantly popping out. It moves about once a day.
Can't wait to switch back to a Wave.
I bet loc-tite on that pivot would help. Also, perhaps bend the divot on the clip a little farther downward into the knife.
-
Sorry buddy hope you can get that clip situated

It's constantly popping out. It moves about once a day.
Can't wait to switch back to a Wave.
I bet loc-tite on that pivot would help. Also, perhaps bend the divot on the clip a little farther downward into the knife.
Done and Done
This is the only Leatherman I have actually lost. Went back to the furniture store and found the couch it was in. After that I removed the clip, added super glue, loctite, and bent the retainer down while also bending the clip as to make it hold better.
Even so the placement makes no sense!!
-
Sorry buddy hope you can get that clip situated

It's constantly popping out. It moves about once a day.
Can't wait to switch back to a Wave.
I bet loc-tite on that pivot would help. Also, perhaps bend the divot on the clip a little farther downward into the knife.
Done and Done
This is the only Leatherman I have actually lost. Went back to the furniture store and found the couch it was in. After that I removed the clip, added super glue, loctite, and bent the retainer down while also bending the clip as to make it hold better.
Even so the placement makes no sense!!
It does if you carry it on the left, and carry a SAK on the right
-
[quote author=Poncho65 link=topic=32239.msg1293567#msg1293567 date=1467252726]
Sorry buddy hope you can get that clip situated
It's constantly popping out. It moves about once a day.
Can't wait to switch back to a Wave.
I bet loc-tite on that pivot would help. Also, perhaps bend the divot on the clip a little farther downward into the knife.
Done and Done
This is the only Leatherman I have actually lost. Went back to the furniture store and found the couch it was in. After that I removed the clip, added super glue, loctite, and bent the retainer down while also bending the clip as to make it hold better.
Even so the placement makes no sense!!
It does if you carry it on the left, and carry a SAK on the right
[/quote]
Not falling for that one [emoji14] -
[quote author=NKlamerus link=topic=32239.msg1293576#msg1293576 date=1467253961]
[quote author=Poncho65 link=topic=32239.msg1293567#msg1293567 date=1467252726]
Sorry buddy hope you can get that clip situated
It's constantly popping out. It moves about once a day.
Can't wait to switch back to a Wave.
I bet loc-tite on that pivot would help. Also, perhaps bend the divot on the clip a little farther downward into the knife.
Done and Done
This is the only Leatherman I have actually lost. Went back to the furniture store and found the couch it was in. After that I removed the clip, added super glue, loctite, and bent the retainer down while also bending the clip as to make it hold better.
Even so the placement makes no sense!!
It does if you carry it on the left, and carry a SAK on the right
[/quote]
Not falling for that one [emoji14]
[/quote]
Oh come on.... a Climber pairs nicely with a Sidekick, and a Camper with a Wingman
-
[quote author=sLaughterMed link=topic=32239.msg1293579#msg1293579 date=1467254163]
[quote author=NKlamerus link=topic=32239.msg1293576#msg1293576 date=1467253961]
[quote author=Poncho65 link=topic=32239.msg1293567#msg1293567 date=1467252726]
Sorry buddy hope you can get that clip situated
It's constantly popping out. It moves about once a day.
Can't wait to switch back to a Wave.
I bet loc-tite on that pivot would help. Also, perhaps bend the divot on the clip a little farther downward into the knife.
Done and Done
This is the only Leatherman I have actually lost. Went back to the furniture store and found the couch it was in. After that I removed the clip, added super glue, loctite, and bent the retainer down while also bending the clip as to make it hold better.
Even so the placement makes no sense!!
It does if you carry it on the left, and carry a SAK on the right
[/quote]
Not falling for that one [emoji14]
[/quote]
Oh come on.... a Climber pairs nicely with a Sidekick, and a Camper with a Wingman
[/quote]It's true everyone knows that you need a SAK in your pocket and a LM either on your belt or clip in your pocket, rather common knowledge

-
@matt31084 said:
New to the site, just got my wingman today! I'm hoping I can relocate the belt clip and replace the two screwdrivers with the LM bit driver. Might try to replace the file with something else as well.Welcome, matt!
I did the clip switch. It's not too hard. Here is the write-up:
/post/1286449
The one additional thing that I'll say is that drilling the hole goes easier if you have some way of supporting the tool from the inside.
Oh, and please let us see the results when you're done!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login