Cool Tool bicycle tool
-
@american lockpicker said:
Okay thanks! :)
Now from what I've been able to piece together, Cool Tools were sold by Gerber (made in Taiwan) starting sometime in the late 1990's. Prior to that they were an independent company. There was even a titanium Cool Tool produced in the US.
Do you have that and if you do would you be willing to sell it?
Sorry man, that one isn't available for sale. :-\
-
There seems to be a number of variations in tang stamps on these. Thanks to Kwakster I now have one, and so was re-reading this old thread. In the Chain took (or what I think is a chain tool) it says "PATENT 4967435," then on the "front" side of teh head it says "COOLTOOL" and "GERBER" on the backside.
I'll try to remember to post pictures this weekend.
Def
-
@Defender said:
There seems to be a number of variations in tang stamps on these. Thanks to Kwakster I now have one, and so was re-reading this old thread. In the Chain took (or what I think is a chain tool) it says "PATENT 4967435," then on the "front" side of teh head it says "COOLTOOL" and "GERBER" on the backside.I'll try to remember to post pictures this weekend.
Def
Gerber logo on yours eh? Neither of mine have that on them. Very interesting :)
Best make those pictures wiki-worthy so we can add them to the page here: https://wiki.multitool.org/tiki-index.php?page=Cool+Tool
-
Will do- it's not quite a logo, more just stamped into it, similar to the Made in USA stamp on your titanium model.
One thing that surprised me about this thing is how slim the head is. I'll take a picture of the profile of it as well, as I don't think I've seen a profile shot of it in the past. I had assumed it was just as thick as a regular adjustable wrench head, like on the SpydeRench.
Def
-
Here it is, thanks to a generous Multitool.org member, my Gerber Cool Tool!

As you can see, it has different markings on the head than some of the others posted here:


And, here it is in comparison to the SpydeRench so you can get an idea of how wide the jaws open.

Admittedly, if you take the file out of the jaws on the Spydie it can open more, but then you also run the risk of all the bits falling out. I didn't have my Guppie handy to compare jaws with it, but it looks like the Cool Tool is the best because of the amount of handle for leverage. While the Spydie may be longer when stretched out, it also has a pivot in the middle, and as a result I'd be leery about exerting serious pressure at the opposite end.
It is an interesting tool, although somewhat limited- perhaps if I was a cyclist I might appreciate it more, but I will say that I do like the allen keys and adjustable wrench ideas! Very handy stuff, although I'm not certain how exactly to use the socket that fits in the middle. Perhaps I am missing a piece still?
Def
-
Look's a lot cleaner than my poor abused example does :)
Bloody generous whoever you are

-
To Def: The socket is held in the jaws,

-
That explains the cutouts on the side! :D
Thanks again! :D
Def
-
One thing that surprised me about this thing is how slim the head is. Def
the slim profile is so it can be used as a cone wrench for bike axles
...and as a pedal wrench.
-
@Defender said:
As you can see, it has different markings on the head than some of the others posted here:Hmmm, interesting. I also note a small notch in the casting, right beneath the worm drive. The notch isn't on my Cool Tool. (a pre-Gerber version, below at right) I wonder what the notch is for?



-
I noticed the notch earlier as well but I didn't notice that yours didn't have it. I have no idea what it might be for... anyone have any idea what it's for?
Def
-
Has ANYONE found where these COOL TOOLS can be CURRENTLY purchased from???
-
@Ed Borden said:
Has ANYONE found where these COOL TOOLS can be CURRENTLY purchased from???Howdy Ed. I'm afraid surfing eBay is the only suggestion I've got. :-\
-
Or looking around on a forum/collector's group like this one. You may also be able to find one for sale at sites like Bladeforums.com, Knifeforums.com, EDCForums.com, BritishBlades.com or at various bicycling forums. They've been discontinued for years and as such can be a pain to find, which is why collectors are after them.
Try making a post in the Tools Wanted section near the bottom of the Main Index- you never know, someone may have an extra, and that's the best way to find it.
Def
-
Found this thread while looking for a Cool Tool to replace the one I got in 1994 or so. Thought I would share a few things.
I went to school at CSU, Chico in Northern Californa in the mid '90's. Robert Seals (Bobby Seals as we knew him) had a ranch about 20 miles out of town. While I was an engineerging student there was a large overlap between the Human Powered Vehicle team, and the Collegate Cycling Team. EVERY cycling engineering student had a Cool Tool. I believe it was one of the first bike specific multi-tools.
Bobby sold the rights to Gerber in 1995, which was announced to dealers in December that year.
http://www.bikepro.com/impressions/cooltool.shtml
As far as features: The hex keys can be inserted 180 degrees from their storage position to make the tool longer and provide more leverage, if you are careful the thin jaws of the wrench can be used as a tire iron, and the groove on the back side in line with the axis of the chain tool screw is a spoke wrench (not sure if that feature is on all models). Also, a rubber O ring holds up much better than the OEM rubber band.
I will re-post if I find a reliable source of Cool Tools.
-
@riparious said:
Found this thread while looking for a Cool Tool to replace the one I got in 1994 or so. Thought I would share a few things.I went to school at CSU, Chico in Northern Californa in the mid '90's. Robert Seals (Bobby Seals as we knew him) had a ranch about 20 miles out of town. While I was an engineerging student there was a large overlap between the Human Powered Vehicle team, and the Collegate Cycling Team. EVERY cycling engineering student had a Cool Tool. I believe it was one of the first bike specific multi-tools.
Bobby sold the rights to Gerber in 1995, which was announced to dealers in December that year.
http://www.bikepro.com/impressions/cooltool.shtml
As far as features: The hex keys can be inserted 180 degrees from their storage position to make the tool longer and provide more leverage, if you are careful the thin jaws of the wrench can be used as a tire iron, and the groove on the back side in line with the axis of the chain tool screw is a spoke wrench (not sure if that feature is on all models). Also, a rubber O ring holds up much better than the OEM rubber band.
I will re-post if I find a reliable source of Cool Tools.
Great post, and welcome to the forum mate

-
Yes indeed, thanks for the info!!

-
Ditto! And please let us know if you find a supplier.

-
Google is a wonderful thing.
I've had a couple of Cool Tools for a decade or more (one on the wife's bike, the other on one of mine), very useful for some older bikes and I've been looking for another tool for a few years now. This place is the only one I've found that lists Cool Tools for sale.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login