Leatherman Surge
-
@duckman1975 said:
Thanks multimat, is it the same with the blades the screws sometimes rotate with the blade.I have not had that problem the blade screws ,is the blade loose? You could try tightening it with the T10 security bit (make sure it is hollow to accommodate the metal lump in the center of the screws) I think with the blade screw you may have to apply Loctite to stop it becoming loose again.Try tightening it & see what happens.
-
I used my Surge at work today (usually carry the PST for work but it is being used for another purpose at the moment)
Compared the the PST, using the Surge to cut steel welding rod was like caressing a supple breast.
Which is nice, because using the outside tools on the Surge is no fun at all.
-
Thanks multimat, is it the same with the blades the screws sometimes rotate with the blade.
I have not had that problem the blade screws ,is the blade loose? You could try tightening it with the T10 security bit (make sure it is hollow to accommodate the metal lump in the center of the screws) I think with the blade screw you may have to apply Loctite to stop it becoming loose again.Try tightening it & see what happens.
Bought 2 sets of T10 security torx thighten the lose parts and its good to go :D
I love my SURGE the only time its not beside me is when I go out of my province.
I have a maintenance schedule of around every 3 months, I wash down the whole tool with water and soap, towel it down and sun dry it for 15 mins or until bone dry sometimes use a hair dryer if I'm in a hurry, be careful of the rubber part of the scissors when doing this. After drying use wd40 on the whole tool then wipe excess. -
@duckman1975 said:
Bought 2 sets of T10 security torx thighten the lose parts and its good to go :D
I love my SURGE the only time its not beside me is when I go out of my province.
I have a maintenance schedule of around every 3 months, I wash down the whole tool with water and soap, towel it down and sun dry it for 15 mins or until bone dry sometimes use a hair dryer if I'm in a hurry, be careful of the rubber part of the scissors when doing this. After drying use wd40 on the whole tool then wipe excess.Good to hear buddy :D
-
The Surge was my first MT. I bid on a Wave on ebay, and received the Surge ??? Did I get a bonus??
-
It's a bonus until you throw your back out from carrying it on your belt! :P
Def
-
I guess it depends on how you want to look at it. Typically, the Surge is a bit more expensive than the Wave. But, you still don't have a Wave.

I would suspect that a used Surge might be a bit harder to sell on the used market, due to the Wave's popularity.
-
@Magic Bus said:
The Surge was my first MT. I bid on a Wave on ebay, and received the Surge ??? Did I get a bonus??
That there big boy is a bonus mate ,ignore those ignorant heathens. Get a Wave as well :D :D :D The removable interchangeable file(DIAMOND
) Saw on the Surge, is a ripper :DI did do too mate :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login