Waiter to apprentice quick mod
-
Meant to get round to the same thing myself... still got the bits sitting around! ::)
-
Holy crap I'm tired. Stuck this one in the wrong thread.... Love the mod though !
-
i did one of these for myself.
its been my casual edc for awhile.
love it.-p
-
Sorry to bring this back from the dead, but how much trickier is this if the SAK in question has several layers?
My plan is to put a Phillips on a Mountaineer. -
No harder as long as you make the pin you are pushing though have a long tapered point.
-
Cheers Syph!
-
@Thunderpants said:
Sorry to bring this back from the dead, but how much trickier is this if the SAK in question has several layers?
My plan is to put a Phillips on a Mountaineer.Making a Grand Prix? Great choice there I'd say. Pics when it's done?
-
Sorry to bring this back from the dead, but how much trickier is this if the SAK in question has several layers?
My plan is to put a Phillips on a Mountaineer.Making a Grand Prix? Great choice there I'd say. Pics when it's done?
+1


-

Now I have to mod one.....LOL
-
Wish I had read this earlier... Had to completely dismantle a Compact and a Tinker to swap the phillips and corkscrew for a friend a few weeks ago...

Sent from my iPhone using Tapatalk
-
Anyone done this to a compact? I never really use the corkscrew apart from holding the eye glass driver.
Actually how difficult would this be on a handyman? As I'm not sure why it doesnt included a phillips anyway
-
It's totally possible on any thickness of SAK I'd say. What I'd do is drill the existing pin as normal. I'd then use a replacement pin that has an extra 2cm long taper on the end and use that to punch out the old pin (but to start only so far as to let the corkscrew come free). Once you've got the Phillips in place as above (and I'd say the more of the layers that can be held in the vice the better) you can then punch out the old pin with the new. This is why the 2cm tapper is important; if you don't use it then the end of the new pin will almost certainly get caught on the lip of a tool or backspring and not want to go through the hole. Once you've got the new pin stock in place then cut off the taper and cut the pin to length and peen as normal.
Hope that helps.
-
@Gareth said:
It's totally possible on any thickness of SAK I'd say. What I'd do is drill the existing pin as normal. I'd then use a replacement pin that has an extra 2cm long taper on the end and use that to punch out the old pin (but to start only so far as to let the corkscrew come free). Once you've got the Phillips in place as above (and I'd say the more of the layers that can be held in the vice the better) you can then punch out the old pin with the new. This is why the 2cm tapper is important; if you don't use it then the end of the new pin will almost certainly get caught on the lip of a tool or backspring and not want to go through the hole. Once you've got the new pin stock in place then cut off the taper and cut the pin to length and peen as normal.Hope that helps.
Yep that's exactly how to do it.
-
It's totally possible on any thickness of SAK I'd say. What I'd do is drill the existing pin as normal. I'd then use a replacement pin that has an extra 2cm long taper on the end and use that to punch out the old pin (but to start only so far as to let the corkscrew come free). Once you've got the Phillips in place as above (and I'd say the more of the layers that can be held in the vice the better) you can then punch out the old pin with the new. This is why the 2cm tapper is important; if you don't use it then the end of the new pin will almost certainly get caught on the lip of a tool or backspring and not want to go through the hole. Once you've got the new pin stock in place then cut off the taper and cut the pin to length and peen as normal.
Hope that helps.
Yep that's exactly how to do it.
That's actually good to know. :D I've only done it once on a four layer SAK and that was a long time ago now.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login