Woodsmans Owners Club
-
Congrats Baz - post plenty of pics so we can awl have a drool!
-
Thanks everybody! You're right about the clock Boonies...I swear it goes backwards postal wise!! -
Medical Bill is in! He has a custom Woodsman like mine (with in-line awl instead of small blade).
WP_20161020_003 by magpie2112, on Flickr -
@magentus said:
Medical Bill is in! He has a custom Woodsman like mine (with in-line awl instead of small blade).
WP_20161020_003 by magpie2112, on FlickrDang!!! I just looked at mine, it's been customized too!!! Somebody must have done a bunch of those........
😜 -
* Magnifier: Old one has gray frame around the magnifier lens (nylon ??), and the new one is clear, presumably a one-piece now.No, I think the new one is a glass lens (which can actually be pushed out from one side if you push hard enough, with a plastic holder
That is correct. There are three versions of the magnifier (from the Sakwiki):
v1 had the gray frame with 8x glass lens circa 1973
v2 has clear frame with 5x plastic lens circa 2004, but existing v1 stock was being used as late as 2006
v3 has clear frame with 6x glass lens circa 2012, and I can attest that it can be popped outJohn
(who accidentally popped a v3 out when cleaning off a fingerprint smudge) -
* Magnifier: Old one has gray frame around the magnifier lens (nylon ??), and the new one is clear, presumably a one-piece now.No, I think the new one is a glass lens (which can actually be pushed out from one side if you push hard enough, with a plastic holder
That is correct. There are three versions of the magnifier (from the Sakwiki):
v1 had the gray frame with 8x glass lens circa 1973
v2 has clear frame with 5x plastic lens circa 2004, but existing v1 stock was being used as late as 2006
v3 has clear frame with 6x glass lens circa 2012, and I can attest that it can be popped outJohn
(who accidentally popped a v3 out when cleaning off a fingerprint smudge)Were you able to pop it back in?
-
I'm dreaming up a little something....Basically Compact Woodsman...I think Jaya built one called a Yeoman WS?..
Awl instead of hook on the scissors layer though.
Is there something like a Champion minus scaler? AKA Woodsman add metal file/Ranger add phillips&mag? Is there a Marlboro one like that?
In any case... I 'need' a Woodsman now,
off to the web... -
* Magnifier: Old one has gray frame around the magnifier lens (nylon ??), and the new one is clear, presumably a one-piece now.No, I think the new one is a glass lens (which can actually be pushed out from one side if you push hard enough, with a plastic holder
That is correct. There are three versions of the magnifier (from the Sakwiki):
v1 had the gray frame with 8x glass lens circa 1973
v2 has clear frame with 5x plastic lens circa 2004, but existing v1 stock was being used as late as 2006
v3 has clear frame with 6x glass lens circa 2012, and I can attest that it can be popped outJohn
(who accidentally popped a v3 out when cleaning off a fingerprint smudge)Were you able to pop it back in?
Yes . . . no problem . . . did it gently so as not to stress the portion that extends down to the rivet . . . it's how they're assembled at the factory. Was worried I might have cracked the frame but fortunately had not.
I don't recommend popping the lenses out deliberately as it would eventually wear the frame down and it would pop out too easily. I read (don't recall where) that guys were doing this with the v3 to use them hand held and then popping them back in.
John
-
@jalind said:
That is correct. There are three versions of the magnifier (from the Sakwiki):
v1 had the gray frame with 8x glass lens circa 1973
v2 has clear frame with 5x plastic lens circa 2004, but existing v1 stock was being used as late as 2006
v3 has clear frame with 6x glass lens circa 2012, and I can attest that it can be popped outMy 2007 (on the package) SwissChamp has the gray mag, could have been made in 2006 tho, and packaged in 2007.
My Explorer has the pop-out lens. Not sure of the year on it.
-
Great thread
Love all the pics in here 
Mags do you happen to have a fanned pic of the Greenwood
I think that it is almost as close to a perect SAK as I would find
I might add one more tool and perhaps take away the opener layer unless I could add a pruner or electrician blade in place of the can opener 
-
@JamesJ said:
I'm dreaming up a little something....Basically Compact Woodsman...I think Jaya built one called a Yeoman WS?..Awl instead of hook on the scissors layer though.
Is there something like a Champion minus scaler? AKA Woodsman add metal file/Ranger add phillips&mag? Is there a Marlboro one like that?
In any case... I 'need' a Woodsman now,
off to the web...Exchange the wood saw blade for a file with hacksaw edge and you have a Modeler, also long discontinued and considered rather rare, but not impossible to find. Takes patience. I also wish there was a six layer - the Woodsman plus the Modeler file (or Modeler plus the Woodsman wood saw).
John
-
@JamesJ said:
Is there something like a Champion minus scaler? AKA Woodsman add metal file/Ranger add phillips&mag? Is there a Marlboro one like that?@jalind said:
Exchange the wood saw blade for a file with hacksaw edge and you have a Modeler, also long discontinued and considered rather rare, but not impossible to find. Takes patience. I also wish there was a six layer - the Woodsman plus the Modeler file (or Modeler plus the Woodsman wood saw).Aha - You guys had this thought too
This configuration would be my dream/optimal large SAK and I was planning to make one someday.I am really surprised that this was never a standard model - As it seems to "have everything you need and nothing you don't need"
- To quote some recent Gerber advertising!! ;)
And no I am pretty sure there is not a Marlborough model like this.
-
@Poncho65 said:
Great thread
Love all the pics in here 
Mags do you happen to have a fanned pic of the Greenwood
I think that it is almost as close to a perect SAK as I would find
I might add one more tool and perhaps take away the opener layer unless I could add a pruner or electrician blade in place of the can opener 
So MTo ponch! Perfect but I would add this and remove this - I love it! I thought mine was perfect, then I did the in-line awl, now I'm thinking, 'but it's got 2 awls! Who needs 2 awls (apart from firiki)? It's a never ending quest!
I'm beginning to think an XLT with scaler removed would be my ideal SAK. But then again I don't like some of the back tools - chisel for example.

Here's the pic as required:
WP_20161021_003 by magpie2112, on Flickr -
Great thread
Love all the pics in here 
Mags do you happen to have a fanned pic of the Greenwood
I think that it is almost as close to a perect SAK as I would find
I might add one more tool and perhaps take away the opener layer unless I could add a pruner or electrician blade in place of the can opener 
So MTo ponch! Perfect but I would add this and remove this - I love it! I thought mine was perfect, then I did the in-line awl, now I'm thinking, 'but it's got 2 awls! Who needs 2 awls (apart from firiki)? It's a never ending quest!
I'm beginning to think an XLT with scaler removed would be my ideal SAK. But then again I don't like some of the back tools - chisel for example.

Here's the pic as required:
WP_20161021_003 by magpie2112, on FlickrCough, cough Pikachu cough
Hey, the two awls can be complementary to eachother and also serve different purposes. One has a threading hole too, remember? ;)
What's wrong with the chisel?
-
Nothing inherently wrong with it - It's just something I have never used and don't see the point of - bit of an afterthought on Vics part - what can we put there?
I've read elsewhere that some have found a use for it though.
I don't really mind too much about the two awls - and you're right about the slightly different uses.

-
I think of the chisel as a 'why not' addition: it can come in handy sometimes and it doesn't take up much space. Although, I do think the tools on the back cause the respective tools on the front to have a lesser snap

I've used the chisel on my beater Ranger to sharpen a pencil and also to scrape off some gooey substance off a chair. Don't use it as an fine screwdriver though

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

