Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

Let's see your sharpening stones/gear!

Scheduled Pinned Locked Moved Edged Tools
210 Posts 1 Posters 14.0k Views
  1. Home
  2. Tool Talk
  3. Edged Tools
  4. Let's see your sharpening stones/gear!
Let's see your sharpening stones/gear!
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • SAK Guy Offline
    SAK Guy
    Posts: 23,929
    SAK Guy Offline
    SAK Guy
    wrote on last edited by
    #148 Quote Reply

      @Poncho65 said:

      @SAK Guy said:

      @SteelRaven said:

      @SAK Guy said:

      I know it takes me forever to get around to things but I finally tried my big Fallkniven bench stone and WOW!!!

      My Trail Master is the sharpest it's ever been which in the past, has been no easy feat. Originally a convex edge and along with it's extremely thick grind, it been a chore to get even close to a really fine edge. I spent about 15 mins freehanding it and bang! Now the old gal is slicing paper pretty well....if I spend a little more time on it, and actually lay the stone on a table (instead of palming it), it might end up close to properly sharp.

      A (crummy) pic....

      I was kicking around the idea of buying a Razor Edge guide to use on this very knife but will wait and see now.

      I'll add other stones later but if you have a stone or system you use on your knives (esp on your bigger Camping/Bushcraft/Hunting knives), post a pic and tell us how you like it.

      Indeed the big CSTM is not something one lets get past the point of nearly dull, because if you do you will understand the meaning of the words Patience is a virtue.

      If I drug it all out and photographed it my wife would KEEL me,

      But I use the Worksharp knife and tool sharpener ken onion for hog work (rare)

      DMT BLUE AND RED variants for sharpening a dull blade

      Spyderco TSM and various ceramic rods for general upkeep and honing.

      Strops for polish honing with mothers aluminum and mag polish, and bare leather too.

      Some steels respond to river rocks, some don't. They all respond to diamonds.

      Diamonds work best I think. On the CSTM, I bought it used and the former owner let it go too long. :facepalm: It's been a work in progress for about 5 years.

      On the DMT, I like that red/blue Duofold pretty well. I used to use one in X-Coarse to sharpen axes/lawnmower blades....it finally wore a smooth spot in the middle but I probably push too hard anyway because I can start wearing one in about 2 years of use. You're suppose to let the diamonds do the work but I still catch myself acting like it's an old carborundum stone. :facepalm:

      It is not hard to push to hard sharpening with a diamond stone :facepalm: Hard habit to break if you learnt on regular stones ;) :D

      :cheers: :cheers:

      1 Reply Last reply
      • kl27x Offline
        kl27x
        Posts: 44
        kl27x Offline
        kl27x
        wrote on last edited by kl27x
        #149 Quote Reply

          Can't decide.... will probably go with a can of Norton oil. Would try water but that Norton stone is already precharged with oil so don't know if that would work. ???

          Both work fine for me. Trick is to use a drop of dish soap with water. For larger jobs I find water AND oil work great with the dish soap. Oil alone can get a little too thick for lapping large surfaces. Considering Norton oil is food safe, I would bet it's food grade mineral oil. My can ran out last month, but I never could see any difference between it and mineral oil from the drugstore.

          To lap other stones or large areas of steel, I rub the corner of a coarse silicon carbide stone onto the coarse India. The AlOx of the india stone isn't as hard as SiC, but it's much tougher than SiC and much harder than glass or granite, so it makes a good, durable, aggressive lapping surface. The SiC stone easily fractures/dislodges particles onto the tougher Norton india. Freshen up, frequently, with more SiC, and it cuts like a demon.

          Some steels respond to river rocks, some don't. They all respond to diamonds

          . A little SiC stone fixes that, too. But your average river rock is going to wear a lot faster than Norton india stone when used that way. SiC and india stone makes a pretty decent alternative to diamond lapping plates, without some of the disadvantages of diamond. Main pro.... you can't permanently mess up or wear out an india stone.. well you could wear one out, but you would have gotten more than your money's worth, lol.

          My Norton Combo india is one of my most useful stones, even if a finished knife edge rarely touches it. It does larger profiling/lapping jobs on hardened steel and lapping shaping of my other stones. not to say the fine side doesn't give a great edge.

          1 Reply Last reply
          • SAK Guy Offline
            SAK Guy
            Posts: 23,929
            SAK Guy Offline
            SAK Guy
            wrote on last edited by
            #150 Quote Reply

              @kl27x said:

              Can't decide.... will probably go with a can of Norton oil. Would try water but that Norton stone is already precharged with oil so don't know if that would work. ???

              Both work fine for me. Trick is to use a drop of dish soap with water. For larger jobs I find water AND oil work great with the dish soap. Oil alone can get a little too thick for lapping large surfaces. Considering Norton oil is food safe, I would bet it's food grade mineral oil. My can ran out last month, but I never could see any difference between it and mineral oil from the drugstore.

              To lap other stones or large areas of steel, I rub the corner of a coarse silicon carbide stone onto the coarse India. The AlOx of the india stone isn't as hard as SiC, but it's much tougher than SiC and much harder than glass or granite, so it makes a good, durable, aggressive lapping surface. The SiC stone easily fractures/dislodges particles onto the tougher Norton india. Freshen up, frequently, with more SiC, and it cuts like a demon.

              Some steels respond to river rocks, some don't. They all respond to diamonds

              . A little SiC stone fixes that, too. But your average river rock is going to wear a lot faster than Norton india stone when used that way. SiC and india stone makes a pretty decent alternative to diamond lapping plates, without some of the disadvantages of diamond. Main pro.... you can't permanently mess up or wear out an india stone.. well you could wear one out, but you would have gotten more than your money's worth, lol.

              My Norton Combo india is one of my most useful stones, even if a finished knife edge rarely touches it. It does larger profiling/lapping jobs on hardened steel and lapping shaping of my other stones. not to say the fine side doesn't give a great edge.

              Wow!!! Thanks for the info bud!!! :cheers: :cheers:

              You've clearly passed steel over stone a few times!!!! :salute:

              1 Reply Last reply
              • kl27x Offline
                kl27x
                Posts: 44
                kl27x Offline
                kl27x
                wrote on last edited by
                #151 Quote Reply

                  I like my stones. :)

                  I rounded up some for a pic. My Norton combo india is far left. Fine side on mine is orange, and it didn't come in as fancy a box as yours. If I had to start all over from scratch, that would be one of the first tools I replace. Then I have a combo silicon carbide stone next to it. Most of the rest are various shades of Arkansas. I use a waterstone in the kitchen, but I forgot to include it.

                  1 Reply Last reply
                  • SAK Guy Offline
                    SAK Guy
                    Posts: 23,929
                    SAK Guy Offline
                    SAK Guy
                    wrote on last edited by
                    #152 Quote Reply

                      Awesome collection! :cheers:

                      1 Reply Last reply
                      • Poncho65 Offline
                        Poncho65
                        Global Moderators
                        Posts: 88,523
                        Poncho65 Offline
                        Poncho65
                        Global Moderators
                        wrote on last edited by
                        #153 Quote Reply

                          @SAK Guy said:
                          Awesome collection! :cheers:

                          +1 some nice stones you have there kl :dd: :like:

                          1 Reply Last reply
                          • kl27x Offline
                            kl27x
                            Posts: 44
                            kl27x Offline
                            kl27x
                            wrote on last edited by
                            #154 Quote Reply

                              Thx guys. I feel a less odd for hoarding pieces of rock like gold bars. It made my day to be able to share with other people who get it. I guess I can divulge; I made this pic my wallpaper. Admitting I have a problem is the first step, right? Thx, again.

                              1 Reply Last reply
                              • Aloha Offline
                                Aloha
                                Global Moderators
                                Posts: 31,235
                                Aloha Offline
                                Aloha
                                Global Moderators
                                wrote on last edited by
                                #155 Quote Reply

                                  @kl27x said:
                                  I like my stones. :)

                                  I rounded up some for a pic. My Norton combo india is far left. Fine side on mine is orange, and it didn't come in as fancy a box as yours. If I had to start all over from scratch, that would be one of the first tools I replace. Then I have a combo silicon carbide stone next to it. Most of the rest are various shades of Arkansas. I use a waterstone in the kitchen, but I forgot to include it.

                                  You've got a nice selection. Thanks for sharing.

                                  1 Reply Last reply
                                  • Poncho65 Offline
                                    Poncho65
                                    Global Moderators
                                    Posts: 88,523
                                    Poncho65 Offline
                                    Poncho65
                                    Global Moderators
                                    wrote on last edited by
                                    #156 Quote Reply

                                      @kl27x said:
                                      Thx guys. I feel a less odd for hoarding pieces of rock like gold bars. It made my day to be able to share with other people who get it. I guess I can divulge; I made this pic my wallpaper. Admitting I have a problem is the first step, right? Thx, again.

                                      No judgement from me :D I have a few and would have more but tracking down older benchstones is a job sometimes :D I have memories of my dad getting an old whetrock out and get one of his carbon steel knives shaving sharp :dd: He would show me how sharp it was by shaving a small bit of hair off his arm and I be like :o :D He still has those same stones 30+ years later and although he has a Lansky and other sharpening things now I still have memories of those older stones he has :cheers: In fact one of them he has was given to him by his father-in-law my grandfather :like:

                                      1 Reply Last reply
                                      • cbl51 Offline
                                        cbl51
                                        Posts: 1,724
                                        cbl51 Offline
                                        cbl51
                                        wrote on last edited by cbl51
                                        #157 Quote Reply

                                          I used a few diamond DMT and Eze-Lap stones for serveal years, and they were good. But then I was up in the attic going through some old boxes of stuff and found my old boy scout stuff. I started to use my boy scout "carborundum" stone and I was amazed at how fast a good newsprint slicing edge got put on. I started to use it almost exclusively for my knife sharpening, and remembered when it was our only way to sharpen, and our knives were sharp. I love the old school stone, and use it now all the time. I do keep a cut down Eze-Lap model L in my wallet for when I'm out someplace and need to touch up an edge.

                                          The model L in wallet with a few odds and ends.

                                          I've been known to use the bottom of a coffee mug in a pinch. Ceramic works good!

                                          1 Reply Last reply
                                          • 4everYoung Offline
                                            4everYoung
                                            Posts: 692
                                            4everYoung Offline
                                            4everYoung
                                            wrote on last edited by
                                            #158 Quote Reply


                                              I got a worksharp guided field sharpener from my wife for Christmas. I used it to sharpen several knives over the past couple nights. I've normally used stones or a diamond file type sharpener. However I have been very pleased with the worksharp. I found most of my blades did well with just the ceramic rod and the strop.

                                              1 Reply Last reply
                                              • Poncho65 Offline
                                                Poncho65
                                                Global Moderators
                                                Posts: 88,523
                                                Poncho65 Offline
                                                Poncho65
                                                Global Moderators
                                                wrote on last edited by
                                                #159 Quote Reply

                                                  @cbl51 said:
                                                  I used a few diamond DMT and Eze-Lap stones for serveal years, and they were good. But then I was up in the attic going through some old boxes of stuff and found my old boy scout stuff. I started to use my boy scout "carborundum" stone and I was amazed at how fast a good newsprint slicing edge got put on. I started to use it almost exclusively for my knife sharpening, and remembered when it was our only way to sharpen, and our knives were sharp. I love the old school stone, and use it now all the time. I do keep a cut down Eze-Lap model L in my wallet for when I'm out someplace and need to touch up an edge.

                                                  The model L in wallet with a few odds and ends.

                                                  I've been known to use the bottom of a coffee mug in a pinch. Ceramic works good!

                                                  I love that leather slip and stone you have from the boyscouts :cheers: :cheers: :like:

                                                  1 Reply Last reply
                                                  • Poncho65 Offline
                                                    Poncho65
                                                    Global Moderators
                                                    Posts: 88,523
                                                    Poncho65 Offline
                                                    Poncho65
                                                    Global Moderators
                                                    wrote on last edited by
                                                    #160 Quote Reply

                                                      @4everYoung said:

                                                      I got a worksharp guided field sharpener from my wife for Christmas. I used it to sharpen several knives over the past couple nights. I've normally used stones or a diamond file type sharpener. However I have been very pleased with the worksharp. I found most of my blades did well with just the ceramic rod and the strop.

                                                      Nice system 4ever :cheers: :cheers: :like:

                                                      1 Reply Last reply
                                                      • kl27x Offline
                                                        kl27x
                                                        Posts: 44
                                                        kl27x Offline
                                                        kl27x
                                                        wrote on last edited by kl27x
                                                        #161 Quote Reply

                                                          re:cbl51:
                                                          Yeah, even my "fine" 240 grit silicon carbide stone will leave a really good edge, esp if I leave the mud on the stone and use a light touch. It works a lot better with a good dose of oil, though, and it does make a bit of a mess, which makes it a bit less handy for pocket use.

                                                          One of the reasons I like translucent Arkansas for a pocket stone is it both holds its shape very well, and it is easy to clean. If you use it dry, it clogs fast, but the grit sticks to the stone, not your pocket. Even a light smoothing/straightening will often make a big improvement. And you can easily wipe the metal off, later. A little bit of paper towel dampened with your tongue will clean it spotless :)

                                                          Half a dozen or one, six of the other, though. With a carborundum stone, I'll sometimes lay off the edge and grind until the stone and blade lap together, and the slurry/stone just kiss the edge. With the translucent ark, I'll lay the edge right on the stone for a touchup. Carborundum is definitely more versatile, though. You can only get by so far with just a fine ark stone. I do love carborundum for the speed and surface finish.

                                                          As an aside, I took the missus to the Home Depot for her annual day-after-xmas Christmas light shopping. While there, I decided to pick up another silicon carbide bench stone. I ask an employee, and he immediately responds that they don't carry bench stones, anymore. The heck, I say. He must be mistaken. Nope.... all they have is a $30.00 6" DMT hone and a flip open DMT pocket hone. No Smith's. No Norton. No generic $10.00 AlOx or SiC stones. What is the world coming to, anymore?

                                                          1 Reply Last reply
                                                          • kl27x Offline
                                                            kl27x
                                                            Posts: 44
                                                            kl27x Offline
                                                            kl27x
                                                            wrote on last edited by kl27x
                                                            #162 Quote Reply

                                                              Re: Carborundum/SiC stone:

                                                              I finally got another (cheap) carborundum stone, and I found something very interesting. The coarse side is the slowest cutting stone I have ever seen. I had no idea carborundum could cut so slow (or at least that anyone would make such a stone!). It's probably 80 grit and it might as well just be a block of glass, then it would at least not make the occasional odd scratch. I use it for lap, though. It is great for lapping other stones, smeared with lapping paste. It's even slower wearing than my Norton coarse india. I wonder now, what an "ideal" carborundum pocket sharpening stone would be in terms of grit and hardness/bonding. I suppose if you made one fine and hard enough, it could put an edge to rival just about anything... Scary sharp uses wet/dry sandpaper which is SiC. But mayhap a fine and hard SiC stone would get glassy, quick, and not cut very well.

                                                              1 Reply Last reply
                                                              • Aloha Offline
                                                                Aloha
                                                                Global Moderators
                                                                Posts: 31,235
                                                                Aloha Offline
                                                                Aloha
                                                                Global Moderators
                                                                wrote on last edited by
                                                                #163 Quote Reply

                                                                  I found this stuff and tried some recently. I am not certain it made a difference however it certainly "feels" like it did. I'll need to do some more testing to be certain. The diamond spray smells awful.

                                                                  IMG_0891.JPG

                                                                  1 Reply Last reply
                                                                  • SAK Guy Offline
                                                                    SAK Guy
                                                                    Posts: 23,929
                                                                    SAK Guy Offline
                                                                    SAK Guy
                                                                    wrote on last edited by
                                                                    #164 Quote Reply

                                                                      You guys have some great systems!!!! :cheers:

                                                                      1 Reply Last reply
                                                                      • kl27x Offline
                                                                        kl27x
                                                                        Posts: 44
                                                                        kl27x Offline
                                                                        kl27x
                                                                        wrote on last edited by kl27x
                                                                        #165 Quote Reply

                                                                          I am not certain it made a difference however it certainly "feels" like it did.

                                                                          Compared to what? That's the question. Also, you supposedly have to make a new strop if you are going to use a finer abrasive than the old one. The larger particles will never come out of the leather.

                                                                          Isn't diamond supposed to cut faster than chromium oxide? I think the finest of chromium oxide compounds is still considered the best final stropping finish, next to bare leather. That's what I have read, anyhow. The str8 razor fans talk about using 0.25 micron diamond paste on a strop for faster cutting before finishing on 0.5 micron chrom ox, then plain leather.

                                                                          As for chromium oxide, I used a generic green buffing bar for years and never thought too much about it. When I finally tried a different brand (of "extra fine") chrom ox, the difference was night and day. I noticed almost immediately. It made my knives sharper AND it also cut faster. If you look at the MSDS, some chromium oxide compounds are as little as 1% chromium oxide and up to 75% aluminum oxide! ??? Size of chromium oxide varies, too. The finer chromium oxides can approach half a micron on average, and it goes up from there to multiple microns. Over a soft backing, like leather, the larger partcles will pretty much never break down into smaller ones, either.

                                                                          1 Reply Last reply
                                                                          • Aloha Offline
                                                                            Aloha
                                                                            Global Moderators
                                                                            Posts: 31,235
                                                                            Aloha Offline
                                                                            Aloha
                                                                            Global Moderators
                                                                            wrote on last edited by
                                                                            #166 Quote Reply

                                                                              The Diamond spray was used on hard leather. I do have cheap green chromium oxide on another strop as well as black and white all on separate strops. I pretty much use the black then white then green and have had terrific results. I have also heard the higher grade chromium oxide is night and day as compared to the cheap stuff.

                                                                              I say "feel" as compared to raw leather, white, and black compound. The green I have been using is by far the most effective as it mostly polishes ( I don't know how much cut if any ) the bevel with my edges coming out stupid sharp. I have also tried mothers mag wheel polish just for kicks.

                                                                              1 Reply Last reply
                                                                              • kl27x Offline
                                                                                kl27x
                                                                                Posts: 44
                                                                                kl27x Offline
                                                                                kl27x
                                                                                wrote on last edited by kl27x
                                                                                #167 Quote Reply

                                                                                  Hmm, I'm a little confused how you compare your black, white, diamond, and leather as having similar feel... confused how the plain leather goes with all the coarser strops, but chrom ox is the stand apart?

                                                                                  I personally hone with translucent ark or maybe ceramic sintered ruby for harder steels and have never used the coarser strops. I go straight from stone to the chromium oxide treated leather, and it doesn't take much stropping from there. I have plenty of convex edges and some recurves, too, but I freehand those on stones, as well.

                                                                                  Lemme know how the diamond works out in the long run. Maybe I'm missing out on something useful.

                                                                                  I'm more concerned, personally, with the final (for me) strop. Now that I have seen the variation in chromium oxide abrasive compounds. I have urge to try some more brands/sellers, but I already have 50 lifetime supplies of green buffing compound. And every new one I try will be another 10 to 20 lifetimes, minimum. :)

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 6
                                                                                  • 7
                                                                                  • 8
                                                                                  • 9
                                                                                  • 10
                                                                                  • 11
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. Edged Tools
                                                                                  4. Let's see your sharpening stones/gear!
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0