Modding a Rebar questions
-
When I did mine I ground some thickness off of the can opener and everything fit a lot better.
</post/1033900>
-
That is odd
I didn't grind anything on mine and everything works great ??? Sorry I couldn't be any help
Hopefully you get it sorted though 
-
I'd like to drill hole/aperture on the side of my Rebar that will serve as a bit holder. I plan to use bits made by my own, but it will be nice if that hole will be suitable also for Leatherman bits. Anyone wil be so kind and measure for me the width and thickness of those flat Leatherman bits? I don't have one to compare.

-
Reminds me, I still need a micrometer... sorry bud, I'm no help.
-
Thickness: 1/8"
Length: 1 1/4" (5/4")
Width: 9/32"Argh! Vernier calipers in Imperial gives me headaches.
-
31.75 × 7.18 × 3.18 mm 8)
-
@hiraethus said:
31.75 × 7.18 × 3.18 mm 8)Yeah, I just felt it made more sense to give the measures in Imperial since that gave such nice even numbers.
-
Hi friends! I signed up on the forum to share experiences of Rebar mod. Rebar + Wave scissors.




-
@krasutskyy said:
Hi friends! I signed up on the forum to share experiences of Rebar mod. Rebar + Wave scissors.Nice, but it is much easier to excavate scissors when they don't touch saw. Try to put the washer between saw and scissors, not between scissors and philips.
-
@krasutskyy said:
Hi friends! I signed up on the forum to share experiences of Rebar mod. Rebar + Wave scissors.Nice job and welcome to the forum.

-
Welcome to
Thanks for sharing

-
Hey fellas!
Just found your forum while I was looking stuff up. I've had a LM Kick for about 12 years or so and I was thinking about getting a Rebar to replace it. What I was wondering about was whether it's possible to replace the saw on the Rebar with a replaceable "T-shank" one such as those on the Super Tool 300 EOD or the Surge? ??? I could part with the serrated blade too if sideways clearance is an issue.Sorry if this has been asked already, I have a bit of a headache so I gave up with looking for older answers once I saw this thread, seeing as it handles the same subject and all.
Thanks in advance! :)
edit: Jesus, 4 edits in a row, should have taken a tylenol before I started posting. :ahhh -
@Skivvy Roll said:
Hey fellas!
Just found your forum while I was looking stuff up. I've had a LM Kick for about 12 years or so and I was thinking about getting a Rebar to replace it. What I was wondering about was whether it's possible to replace the saw on the Rebar with a replaceable "T-shank" one such as those on the Super Tool 300 EOD or the Surge? ??? I could part with the serrated blade too if sideways clearance is an issue.Sorry if this has been asked already, I have a bit of a headache so I gave up with looking for older answers once I saw this thread, seeing as it handles the same subject and all.
Thanks in advance! :)
edit: Jesus, 4 edits in a row, should have taken a tylenol before I started posting. :ahhhYou can make the ST300 EOD blade exchanger work, but it requires some work.....
http://forum.multitool.or...ex.php/topic,67918.0.html
I've got mine in a Rebar handle with the SE blade, awl, large flat driver/pry tool, and mini bit driver from the Wave.
-
hi guys, i just got myself a new rebar and i really can't wait to do some modding to the tool. was thinking of swapping the scissors from my wave over to the rebar. kinda new to the modding scene. is there anything i need to pay extra attention to when moving the scissors over? any clearance issue? good day!!
-
@benjigoh said:
hi guys, i just got myself a new rebar and i really can't wait to do some modding to the tool. was thinking of swapping the scissors from my wave over to the rebar. kinda new to the modding scene. is there anything i need to pay extra attention to when moving the scissors over? any clearance issue? good day!!Welcome to

There are several threads about modding the Rebar
The scissors swap is fairly straight forward, just make sure you don't lose any of the small washers as you take it apart 
Here is the thread I made when I did this to mine

/topic/67409
If you have any questions just ask
oh and happy modding

-
Hi Poncho65,
Thanks for the link. Really helpful.
I was browsing through the forum and I noticed that some mods are not as straightforward as it seem to be. Some require filling which is easy but others require drilling which would be a problem for me. Because of this, I am trying to research more on the mods first to ensure no drilling is required.
Cheers.
hi guys, i just got myself a new rebar and i really can't wait to do some modding to the tool. was thinking of swapping the scissors from my wave over to the rebar. kinda new to the modding scene. is there anything i need to pay extra attention to when moving the scissors over? any clearance issue? good day!!
Welcome to

There are several threads about modding the Rebar
The scissors swap is fairly straight forward, just make sure you don't lose any of the small washers as you take it apart 
Here is the thread I made when I did this to mine

/topic/67409
If you have any questions just ask
oh and happy modding

-
@krasutskyy said:
Hi friends! I signed up on the forum to share experiences of Rebar mod. Rebar + Wave scissors.I have similar configuration as krasutskyy, but I want to replace Philips to big bits holder. Will Wave/Charge big bits holder fit in there?
-
Hi friends! I signed up on the forum to share experiences of Rebar mod. Rebar + Wave scissors.
I have similar configuration as krasutskyy, but I want to replace Philips to big bits holder. Will Wave/Charge big bits holder fit in there?
It should fit just fine.
-
Any drilling required on the pin hole to fit it in?
ThanksHi friends! I signed up on the forum to share experiences of Rebar mod. Rebar + Wave scissors.
I have similar configuration as krasutskyy, but I want to replace Philips to big bits holder. Will Wave/Charge big bits holder fit in there?
It should fit just fine.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Anyway, thank you very much!