What did you use your Sak on today?
-
@NorCalJim said:
By the way, is that custom a 3 layer?Thanks for sharing!

Thank you NorCal.
Well it would have been 3 layers except I wanted the wood saw :ahhh and that makes it 4. A 3 layer SAK will always feel like my first knife, the Camper, but I wanted the scissors and magnifying glass which brought this out to 4.
I have found some customs on eBay, but I do believe it is best to know your modder. -
Here's the one I bought from eBay. It had black scales on it, but I like white, especially since it's a Scientist. It has been modded as it now has an added metal saw.
<a href="https://flic.kr/p/Rm1EjA" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/408/32387940462_3ae28f69d3_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
I'm pretty sure I mainly use my SAKs for photo opportunities:
<a href="https://flic.kr/p/Rw3J87" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/257/32501508436_12032372e9_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
!! -
Needed a saw so I grabbed the Woodsman. I wound up using the Mag glass to read the tiny print on a lightbulb over our dinner table. To have the vision of youth..

-
@FolderBeholder said:
I'm pretty sure I mainly use my SAKs for photo opportunities:
<a href="https://flic.kr/p/Rw3J87" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/257/32501508436_12032372e9_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
This post resonated with me. When I retired, I wanted to enjoy photography again but was way overdue for knee surgery. It was just before Christmas and I kept photographing Christmas decorations, especially the small figures on our piano. I can only imagine my photo ops if I had my SAKs.


-
Great pic Jim!! -
Wound up breaking out the mighty Swisschamp for the chiseling to do some whittling tonight.

-
Used my Pruner (new to me) main blade to cut and remove the masses of fat (about 1/3 weight) off two large briskets I've been brining for about 10 days. I then used the pruner blade to open a bag of coal. Then the main blade to cut down a 6X1" stick of fatwood into slivers as fire starter for the smoker. After that peeled and cut up some raw carrots to snack on. It was still shaving arm hair after that. Colour me impressed.
-
This mangled set of staples was liberated using the pliers on my Cybertool 34.
<a href="https://flic.kr/p/QogXBt" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/398/31757201533_e1be6e06ed_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
@FolderBeholder said:
This mangled set of staples was liberated using the pliers on my Cybertool 34.
<a href="https://flic.kr/p/QogXBt" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/398/31757201533_e1be6e06ed_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Good use of the pliers!

-
Used the Explorer's awl to punch through cardboard on a Boy Scout Klondike sled to zip tie it to the sled sides.
-
Used the big flat screwdriver on the Craftsman to put together a hanging file folder frame for the desk.
-
Well, it's not really what i did with it... It's rather what i did to them... Changing scales on a couple of new backup Tinker´s today :D
It takes patience on the vice to get the new scales flush with the outer liners, to give it a factory look. And when you tighten, you have to let it sit for a bit before you relief pressure on it. It turned out ok i guess

-
Doing some DIY (Do It Yourself) or, as we say in the UK, Destroy It Yourself :D.
What's that honey? No I'm not on the forum again, just finishing off the skirting.....
-
This is a very good reason to not carry a Solo.

-
Had no dedicated tool under the hand, so I made an hole with my superTinker awl, and then used my mp400 Phillips driver to screw the coat hanger on the hard wood
It's amazing how the mp400 can withstand so much torque!


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login