TL-29
-
Page 2
An old Camillus civilian issue with wood handles and steel liners and bolsters.
A military issue Camillus TL-29 from a TL-14 lineman's kit.
An unusual Colonial Barlow pattern electrician's knife.
A Colonial advertising DuPont explosives(Buckley Powder Co.



-
Page 3
3 blade electrician's knife by Colonial
Colonial with saw cut handles.
Another 3 blade Colonial.
2 blade Colonial with an unusual flat ground screwdriver blade.



-
Thank you for the pics of your knives Dean!

Wow Ray great collection! 8) Thanks for posting.

-
Nice group of TL-29s David
Thanks for the links too, especially the discussion on AAPK
I use to search for Electrician knives at garage sales, flea markets, etc
I often found the TL-29 with the locking tab all buggered up, preventing a firm lock up of the screwdriver blade
-
[/quote]
That's a great collection.

I've never seen handles like that before. I wonder if someone had it done.
[/quote]
It appears as though whomever had it took a file(or possibly a fine toothed saw)and cut the grooves.Not quite symmetrical but decent as it must have been fairly difficult to do.
Here are some more.
Holub Sycamore Illinois.Not sure they were a manufacturer;probably a distributor.
Imperial.
Kingston(a fairly rare one as they weren't in business very long.Mostly known for metal handled military utility knives.
M.Klein & Sons 3 blade. The odd blade is used for something electrical but I can't recall what exactly.



-
Page 2
A military TL-14 Signal Corps kit with a 4 line Camillus TL-29.
A new electrician's knife marked "The Tool Kit People" No idea who made it;doesn't look Chinese.
Ric-Nor Electric Mate;made for a company based in Boston Massachusetts.
Sabre Japan electrician's knife with saw cut handles.



-
Last ones:
Schrade-Walden wood handles electrician's knife.
Not sure this one is an electrician's knife.The saw blade would indicate it is likely a gardener's knife but the frame is the same so I thought I'd toss it in.The pruner blade could be used to strip wires.
A Utica Kutmaster with faux jigged bone handles.
Xellite.Not sure who made this;maybe Schrade or Camillus.



-
More good knives Ray!

-
Great collection Ray

-
This thread is full of awesome! Great collections gents and thanks for sharing.
-
This Camillus TL-29 just arrived. Dean gifted me this one. He has tuned it up nice. Thank you for your generosity buddy!
-
Awesome collection!!!!
-
There was a Rope knife like the lineman's jack only longer, WW era production I think.
There was also a coast guard knife.
[/quote]
Here are a few rope knives.
First is a Camillus S-702 which is a civilian version of the USCG WWII era rope knife.
Second is an original USCG rope knife.
Third is a Utica Kutmaster with an unusual serrated blade.
Last is a Schrade # 163 rope knife.



-
-
That's a great collection.

I've never seen handles like that before. I wonder if someone had it done.
[/quote]
It appears as though whomever had it took a file(or possibly a fine toothed saw)and cut the grooves.Not quite symmetrical but decent as it must have been fairly difficult to do.
Here are some more.
Holub Sycamore Illinois.Not sure they were a manufacturer;probably a distributor.
Imperial.
Kingston(a fairly rare one as they weren't in business very long.Mostly known for metal handled military utility knives.
M.Klein & Sons 3 blade. The odd blade is used for something electrical but I can't recall what exactly.
[/quote]Holub--might be Schrade, as I've seen a Craftsman three blade supposedly made by them that had those strippers in the screwdriver blade, and secondly, I've seen more traditional Holubs attributed to Schrade, and Camilus too.
Nice Kingston--only Kingstons I've seen are like you say, metal handled, a Stockman, the utility knives, and I think a jack too.
As for the Klein, that's a Romex stripper, or so I've heard. I do believe that's exclusive to Klein branded Kutmasters.
-
Here's some of mine, decided to start with Kutmaster, as most of my electrician/hawkbill/rope knives are by them.
First up, hawkbill and rope:
First is a "Klein Tools" by Kutmaster; was my grandfather's in the coal mines in the Jewell Ridge, VA area in the mid '70s to early '80s. I got it barely a year ago, and it's hooked me on hawkbills.
Kutmaster made USGC Survival/Raft Knife by Kutmaster, which uses a hawkbill frame, and has a big beefy sheepsfoot and can opener--note tang stamp is ground off and no bail, I got it for eight bucks as a factory second brand new. Someone managed to drill two holes on one side for the bail, and a bail wasn't even put on, I think I can find a scrap hawkbill for the bail, as there's still a hole in the right place on the other side for a bail. It's a favorite for farm EDC, as whatever Kutmaster uses for their stainless is great stuff.
"M. Klein and Sons" hawkbill, unknown maker (I suspect Camillus or Ulster). It predates the "Klein Tools" by at least 10 years or so, and likely comes from the early sixties. According to Kutmaster, that extra pin behind the bail pin means they didn't make it. It belonged to a coal miner friend of mine who carried it underground attached to his belt with a carabiner. The reason it was retired from use was that the bail broke off.
2017-02-01_06-31-46 by cody6268, on Flickr -
@cody6268 said:
Here's some of mine, decided to start with Kutmaster, as most of my electrician/hawkbill/rope knives are by them.First up, hawkbill and rope:
First is a "Klein Tools" by Kutmaster; was my grandfather's in the coal mines in the Jewell Ridge, VA area in the mid '70s to early '80s. I got it barely a year ago, and it's hooked me on hawkbills.
Kutmaster made USGC Survival/Raft Knife by Kutmaster, which uses a hawkbill frame, and has a big beefy sheepsfoot and can opener--note tang stamp is ground off and no bail, I got it for eight bucks as a factory second brand new. Someone managed to drill two holes on one side for the bail, and a bail wasn't even put on, I think I can find a scrap hawkbill for the bail, as there's still a hole in the right place on the other side for a bail. It's a favorite for farm EDC, as whatever Kutmaster uses for their stainless is great stuff.
"M. Klein and Sons" hawkbill, unknown maker (I suspect Camillus or Ulster). It predates the "Klein Tools" by at least 10 years or so, and likely comes from the early sixties. According to Kutmaster, that extra pin behind the bail pin means they didn't make it. It belonged to a coal miner friend of mine who carried it underground attached to his belt with a carabiner. The reason it was retired from use was that the bail broke off.
2017-02-01_06-31-46 by cody6268, on FlickrA lot of great history there

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

I hope you enjoy it.