Bladeless Explorer?
-
I saw that this thread had a bunch of replies, wow!

You all got me thinking about this mod again.
I like Jaya mans execution, but can I use the metal saw spring and some washers? Or will there be problems larger than a cleaning access gap? ???
I ask because the ranger is going cheap on uk amazon.Thanks again all, and sorry if I am missing something obvious. :)
-
Reason why I chose the blade backspring is so that I can retain the corkscrew (thicker than the metal saw)...
Sent from my iPhone using Tapatalk
-
I'm probably missing something, but could you not pad that metal saw spring with washers?
If its the same thickness as the wood saw spring, it appears to be only a little thinner. Why could I not make it thicker with washers to make the corkscrew fit?

Thanks again, and sorry if I am missing something.
-
Just to clear things, am I correct in assuming that you plan to use a single metal saw backspring, avmetal saw and a corkscrew in one layer?
If so, then there will be a visible gap between the layer and the outer liner...
Sent from my iPhone using Tapatalk
-
You assume correctly, and a gap is okay with me.
I was just wondering if there would be other problems with doing it that way.
Thanks!
-
Liner is flexible... so is the cellidor scales

Sent from my iPhone using Tapatalk
-
Okay, I understand.
Thanks. :) -
So, as I understand it, the only parts I need for a bladeless ranger are some thin washers?
I was looking around, where could I find a set of washers around 0.5mm thick(is that the approx correct thickness?), with an inner diameter of approx 2.5mm?
Has anyone bought the like of that size before?
I'm looking around the 'bay.Thanks. :)
Edit: Would you consider it easier to make the washers from brass sheet? That seems to be more available.
-
I got my last order of phosphor bronze knife washers from http://usaknifemaker.com. There are a few other similar sites. You can try fastener places too, but the knife shops usually have what you need in more workable quantities (not 1000+). Light polishing may be required to remove small edges.
Good luck.
-
@Pablo O'Brien said:
So, as I understand it, the only parts I need for a bladeless ranger are some thin washers?I was looking around, where could I find a set of washers around 0.5mm thick(is that the approx correct thickness?), with an inner diameter of approx 2.5mm?
Has anyone bought the like of that size before?
I'm looking around the 'bay.Thanks. :)
Edit: Would you consider it easier to make the washers from brass sheet? That seems to be more available.
Making your own washers is certainly an option if you only need a few. Clamp the thin brass firmly between two pieces of wood to drill a clean hole, then snip, file and sand to shape.
-
Making washers sounds fine to me! ;)
Question, regarding the other bladeless option, opener layer in place of blades.
I assume the opener spring would replace the blade spring, and everything would work fine aside from needing some washers?
Are there any pics of this mod? -
Wow, perfect timing for me. Recent topic.
I started a new job this week and it turns out that blades are strictly forbidden in the plant. As well as nothint in pockets above the waist.
I work in maintenance and feel hobbled by not having the Explorer.
I have a few and at first about lopping off the blades and awl, but it seems like a crime.My thought now is removing the awl/openers layer, then moving the openers to the corkscrew/blades layer. (Basically creating a corkscrew/openers layer). At first glance the thickness appears similar, but they're not. Also the small blade is thinner and has a spacer.
Is there a chart listing tool thicknesses?
This would get me closer to the scientist/yeoman thickness (I'm afraid of losing them now, and stopped carrying them). Any thoughts about this?
Probably for a different topic , but any thoughts about TSA approval?
-
@Reddog said:
Wow, perfect timing for me. Recent topic.
I started a new job this week and it turns out that blades are strictly forbidden in the plant. As well as nothint in pockets above the waist.
I work in maintenance and feel hobbled by not having the Explorer.
I have a few and at first about lopping off the blades and awl, but it seems like a crime.My thought now is removing the awl/openers layer, then moving the openers to the corkscrew/blades layer. (Basically creating a corkscrew/openers layer). At first glance the thickness appears similar, but they're not. Also the small blade is thinner and has a spacer.
Is there a chart listing tool thicknesses?
This would get me closer to the scientist/yeoman thickness (I'm afraid of losing them now, and stopped carrying them). Any thoughts about this?
Probably for a different topic , but any thoughts about TSA approval?
Great to have you here!

I believe that the opener layer is 0.39mm thinner than the blade layer, but don't quote me on that, I'm looking for details about this mod too! :D
-
Thanks, I just noticed also the keyring eye is part of the spring. This complicates things
-
@Reddog said:
Thanks, I just noticed also the keyring eye is part of the spring. This complicates thingsI did not notice that.

Checked again, it complicates nothing if you have the backside philips...But the explorer has the corkscrew.

I think there might be enough metal to grind off to make the corkscrew fit without losing the keyring?
And you could alway make the corkscrew a tiny bit shorter, with a new tip... -
Thinning the corkscrew pivot may make it simpler. I'd need to figure which side to surface, or equal on each side.
Hmmm. That would allow the openers to fit, with no shims.
-
But the corkscrew tip relief would need to be opened, either by as mentioned, grinding back the corkscrew tip, or grinding a deeper relief on the spring.
-
Weell, I've made v1 of my first bladeless mod.

I started with a Hiker, replaced the blades with the openers(but kept the blade spring).Apart from the bottle opener needing a 0.4mm washer(need to make one for v2), and the openers having extra strong snap(not nail breaking though!), it all fits well.
Using the blade spring, with a liner stamped for the post-2005 2mm blade tang eliminates the need for washers (except one for the bottle opener).
The downsides are that you lose the keyring and the openers sit high, which could be uncomfortable?Next thing to do is to make that little washer!
Question, will 2.38mm brass rod(3/32) substitute fine for the 2.5mm rod? Its the closest I found locally aside from 3.18mm(1/8) rod, which would require a heck lot of sanding.


-
Nice mod... Did you make use of the spacer that goes with the small blade?
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login