The PST 1.5.1 adding the saw
-
Well I have carried my PST 1.5 lately and finally made myself go and cut a SOG saw to fit into my PST :D
I have had it marked to cut for months

<a href="https://flic.kr/p/RGcGUA" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/4/3951/32616425314_94f647a145_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20170315_115117 by Poncho 65, on Flickr
Compared to a couple other PST/PST II parts to see what needed to be cut away for sure

<a href="https://flic.kr/p/SMpCCV" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/4/3848/33331691541_255bf9db10_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20170315_115320 by Poncho 65, on Flickr
I cut the back off and then went to making the pivot end match the factory PST end of this blade

<a href="https://flic.kr/p/RGcC4o" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/4/3728/32616409004_0c08384932_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20170315_122052 by Poncho 65, on Flickr
<a href="https://flic.kr/p/SYGaYg" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/739/33459400195_e8a2ff65b6_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20170315_122103 by Poncho 65, on Flickr
<a href="https://flic.kr/p/SoR6C3" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/3/2842/33076380710_a79f3b82eb_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20170315_122037 by Poncho 65, on Flickr
Next I took a diamond stone and a sanding block to clean it up and make the finish a bit smoother and more eye pleasing :D
<a href="https://flic.kr/p/RJLc9V" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/4/3670/32645396913_ec670f916c_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20170315_122800 by Poncho 65, on Flickr
Next into the PST and see if it fits
Yep looks pretty good
Now I mark the nail nick position with a Sharpie 
<a href="https://flic.kr/p/SoQRUG" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/780/33076334580_62bb3f35f4_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20170315_123359 by Poncho 65, on Flickr
Cut the nail nick in

<a href="https://flic.kr/p/SV9sPJ" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/4/3895/33419263816_7693f90177_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20170315_123543 by Poncho 65, on Flickr
Now to see if it can cut

<a href="https://flic.kr/p/SV8R5h" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/4/3947/33419143556_d4212eb7f4_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20170315_124314 by Poncho 65, on Flickr
Tested and works
Now to see the finished PST 1.5.1 
<a href="https://flic.kr/p/SoRpGj" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/3/2823/33076441510_b5e9e10194_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20170315_124037 by Poncho 65, on Flickr
And a comparison to the Rebar and it's saw

<a href="https://flic.kr/p/SV8TH3" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/727/33419152416_0c1aa4bba8_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20170315_124158 by Poncho 65, on Flickr
-
Great job Poncho

-
Nice

-
Way to go Mr Poncho!

-
Thanks guys
I am going to try and carry it for a bit and see how it goes 
-
Nicely done Poncho

Sent from my SM-G920R4 using Tapatalk
-
Nice job! That's something I want to do, but I haven't found a busted PST or PST II to do it to. My PST II still works fine, and I see no reason to mess with it. I'm thinking about trading an intact PST for a friend's which has had one of the plier pivots disappear (which was replaced with a nut and bolt).
-
What started this was that I bid on a PST II and got it for cheap but the handles were messed up ::) and I also had a PST that I didn't care to take apart with a couple issues ;) :D
It is a very great EDC anyways and now it is more so with the saw
Not really much else that I would need on it
Especially since I carry a SAK anyways 
-
-
Guess I could include the original thread were I started with this PST

/topic/65702
Pietervn also did this mod a couple years ago and had I noticed his I wouldn't have had to cut the back off of mine
Guess I should have cut the pivot part first then tried it
Well I have another so I may give it another go 
/topic/48498
-
10/10

How about a :ahhh :ahhh :ahhh!!! MINI !!! :ahhh :ahhh :ahhh saw? :D -
Cool mod

-
A :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh With a saw
Now that is a great idea :D Not much you might be able to cut with it though

-
-
A :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh With a saw
Now that is a great idea :D Not much you might be able to cut with it though

Stop making excuses and get it done!

Nearly have to be foldable to be able to cut anything
that or an inch and a half saw :ahhh :ahhh :ahhh 
-
A :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh With a saw
Now that is a great idea :D Not much you might be able to cut with it though

Stop making excuses and get it done!

Nearly have to be foldable to be able to cut anything
that or an inch and a half saw :ahhh :ahhh :ahhh 
It would still be cool. :D
-
You ever see the little blades I made for the Core?
-
Found a pic.
<a href="https://flic.kr/p/dW2urD" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/9/8229/8487662791_c477b3bb62_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
I had not seen those :o I
them and they would both fit into the :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh :DVery cool 8) Thanks for the pic

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
