Schrade Tough Tool
-
I have been interested in the Scharade Tough Tool for awhile. I picked up a used one from a local Ebay seller for a reasonable price. I decided once tool was clean & lubed to let it loose on my eldest son's birthday present a mountain bike.
[(http://i291.photobucket.com/albums/ll287/multimat426/multitools/9a7d4e86.jpg)]
](http://![)It is funny I have picked up a couple of used MTs that are cosmetically banged up on the outside but have factory sharp edges
this is one of those.Both Def & Bob(J-sews) have done excellent reviews on this tool on the main site & the encyclopedia respectively. My tool looks like a series 1 ST1(1997ish). Some pics comparing the tool with my Surge & Swisstool.[(http://i291.photobucket.com/albums/ll287/multimat426/multitools/b6d0b06d.jpg)]
](http://![)[(http://i291.photobucket.com/albums/ll287/multimat426/multitools/9b02d4ae.jpg)]
](http://![)[(http://i291.photobucket.com/albums/ll287/multimat426/multitools/53ba9b9b.jpg)]
](http://![)A better pic showing the shorter blade on the ST1
[(http://i291.photobucket.com/albums/ll287/multimat426/multitools/dac0d7e8.jpg)]
](http://![)THE BLADES[(http://i291.photobucket.com/albums/ll287/multimat426/multitools/e0c6b0a8.jpg)]
](http://
Fully serrated
[(http://i291.photobucket.com/albums/ll287/multimat426/multitools/c3ae92a9.jpg)]
](http://
Even odder Mini sickle
Points of interest, the Phillips head has straight serrations which I teased you guys with in the macro picture post, I think the consensus was the serrations help with grip .
[(http://i291.photobucket.com/albums/ll287/multimat426/multitools/86dfd285.jpg)]
](http://
The locking mechanism applies to 4 of the 10 tool bits.It is similar to Leatherman's Super Tool method of locking but in my opinion the ST1's is better.You can not fall into the trap of locking all the bits open like you can on the leatherman which requires levering the locks off with another tool. On the ST1 the middle tool bit is the lock release , which you do by pushing down on it (it is slightly raised compared to the other tools) the bit is not a locking tool so there is no worry about not being able to release the lock.It is also easier to push down on the lock release with gloves on than have to open a tool bit out like you do on the LM.(Micky
).I wonder why Scharade did not make
the remaining outside tools lockable
[(http://i291.photobucket.com/albums/ll287/multimat426/multitools/042472af.jpg)]
](http://
2 locking bits either side of the lock release bit.Another feature I like on the ST1 is the cut outs to make accessing the nail nick easier, note to Victorinox

2 Pics of cutouts
[(http://i291.photobucket.com/albums/ll287/multimat426/multitools/74dd0c91.jpg)]
](http://Some pics for Bob :D , the layered/laminated pliers head, not found on latter series ST1's
[(http://i291.photobucket.com/albums/ll287/multimat426/multitools/1fe031eb.jpg)]
](http://THE BADThe price of being different.Tool in hand the ST1 is 4cm wide the Surge is 2cm & its a huge MT, the Swisstool is 1.5cm :o . If you were a gorilla you may find the ST1 easy to use :D
[(http://i291.photobucket.com/albums/ll287/multimat426/multitools/b4dce8e8.jpg)]
](http://
Surge in handThe handles, when tensioning the brake cable my hand kept sliding down the tapered handles towards the pliers >:(
[(http://i291.photobucket.com/albums/ll287/multimat426/multitools/7f514ded.jpg)]
](http://![)In summary the ST1 is a well made MT with a good selection of tools , its major problem is I found it very awkward to use. So I ended up using my LM Fuse to finish the bike assembly.
THE BIKE
[(http://i291.photobucket.com/albums/ll287/multimat426/multitools/0a106644.jpg)]
](http://
-
@Defender said:
One nice thing about the design of the locking mechanism on the Tough Tool is that it's very easy to make it legal in placed where locking blades are frowned upon- all you have to do it file off that little nub, which is only a few minutes work by hand or a few seconds with a Dremel tool. Since the backspring is designed to function both as a backspring and a lock, it's got enough tension to keep the blade open during use, unlike many other knives and multitools where disabling the lock means a floppy blade.Great write up- are you planning on making this one a shelf queen now, or do you envision yourself trying to carry and use it?
Just an aside- the experienced multitool enthusiast can pick out these problems after comparing it with other tools, but it was my father's only multitool for many years and he thinks it's the greatest thing ever. Of course the tip of the blade is broken off, and it's got a hole drilled in it so he could tie a lanyard to it (my father has a total of 5 boats- a pontoon boat, aluminum fishing boat, 2 kayaks and a Zodiac, so a lanyard is important!) and a few other "mods." Still, it took him a very long time to switch to the Spirit I gave him, saying it was his "Sunday Tool" and he didn't want to mess it up!
Def
Def for me to use the ST1 it would be a exercise in penance , it is just too awkward for my small to normal sized hands. I just enjoy it in the context of were MT's have come from & were they are going. It was funny one of the Ebay sellers of ST1's had posted some promo testimonials from Schrade re the ST1,where satisfied customers proclaim it the Duck's guts of tools . If you have never used a MT before even a crappy one could be darned handy/invaluable.So I think your first solid MT has a special place, like your dad's ST1 had/has, even though newer ones are more refined(better
)@DavidBinGA said:
I use to own one of those, was kinda nice and I ended up selling it to a guy at work. He later snapped of the blade and bent the phillips, how's that for love and respect ::)Wasn't your father in law was it
:D -
A few months ago, I bought the current Tough Tool at Kmart.. I was SO disappointed! I don't think I was ever disappointed with a MT purchase before that! How could a company put a tool out like that? I can honestly say, I'd rather a Suspension!

-
excellent review and pics!

I felt like I was at the circus! :D
-
Nicely put together Mat (the review, not the Tough Tool) :D
A well rounded multitool collection really needs to have one of these in it, just as an example of the variations in design ten years ago. Schrade obviously must have realized that the Tough Tool was an inferior design, but what else could they do? As a big American cutlery manufacturer with declining knife sales, they needed a plier multitool in their line-up, yet they waited so long to introduce one that all of the more conventional designs were already taken. Side-opening blades were one way around the Leatherman patents, but not a very good one. :(
-
@J-sews said:
Nicely put together Mat (the review, not the Tough Tool) :DA well rounded multitool collection really needs to have one of these in it, just as an example of the variations in design ten years ago. Schrade obviously must have realized that the Tough Tool was an inferior design, but what else could they do? As a big American cutlery manufacturer with declining knife sales, they needed a plier multitool in their line-up, yet they waited so long to introduce one that all of the more conventional designs were already taken. Side-opening blades were one way around the Leatherman patents, but not a very good one. :(
Thanks Bob, I think on tool selection Schrade actually offered something legitimately different to LM & IMO their locking mech was much better than LM offering at the time (Super Tool) I am surprised that they opted to have only 4 of the 10 tools locking
. Maybe they should have marketed the tool as perfect for the huge of hand or Gorillas :D@Leatherman123 said:
A few months ago, I bought the current Tough Tool at Kmart.. I was SO disappointed! I don't think I was ever disappointed with a MT purchase before that! How could a company put a tool out like that? I can honestly say, I'd rather a Suspension!
Nikko sounds like you bought a made in China version , Bob did a good post on the massive difference in quality between the USA made Tough Tool & the China made one . It is sad when a company's name is bought & used with no regard to it's history of producing quality well made products >:(
-
Yeah, I have the Taylor Cutlery version- unfortunately..
-
Well it is offical I dont want one now. So thank you so much for saving me money!!!!
-
I want to get one of those cheap new ones for comparison sake, but I really don't want to part with a whole $13 for one....
Def
-
Well there is one of the older schrades at the local aubachon hardware down the road and I was going to spring the 46 bucks for it, but no.
Plus I herd Def you love taylor.
-
If I knew where mine was, I'd send you mine!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login