84mm SAK love
-
Great story mate

Glad your love and interest in sak's got back and it's growing.So about the scissors Vic vs Wenger design:
All the scissors on the Evolution (Delemont) series are Wenger ones, meaning they are serrated on the blades and supposed to be self-sharpening because of that. Also the spring mechanism doesn't use a leaf spring like Vic but a leaver that uses the actual back spring of the tool.
Vic uses the leaf spring system, that is maybe a little less tough, but springs are easily raplaceble and cost next to nothing.
I have to say, I've yet to break or even damage a spring on a Vic scissors, one just need to use it carefully and right and they'll last ages.Wenger scissors works best for paracord and similar materials because of the serrations, but the Vic works best for paper, finger nails and such.
-
@MacGyver said:
Great story mate
Glad your love and interest in sak's got back and it's growing.So about the scissors Vic vs Wenger design:
All the scissors on the Evolution (Delemont) series are Wenger ones, meaning they are serrated on the blades and supposed to be self-sharpening because of that. Also the spring mechanism doesn't use a leaf spring like Vic but a leaver that uses the actual back spring of the tool.
Vic uses the leaf spring system, that is maybe a little less tough, but springs are easily raplaceble and cost next to nothing.
I have to say, I've yet to break or even damage a spring on a Vic scissors, one just need to use it carefully and right and they'll last ages.Wenger scissors works best for paracord and similar materials because of the serrations, but the Vic works best for paper, finger nails and such.
+1 and agreed

-
Aw maann.... bloody smartphone deleted half of my original post....
i wrote a lot more stuff... 
Anyway...
the Wenger scissors have a bit less cutting area than similar sized Vic's that have a bit longer blades. The Vic's are also a bit more beefier and thicker as a tool, Wenger ones are a little thinner.
It's really a matter of preference here, some guys love the Wenger scissors, others prefer Vic's scissors. I personally prefer Vic's scissors for general purpose edc

These days i usually edc an alox Classic (53mm) on my keys for the scissors and nail file and a Small Tinker or Tourist for my main Sak. It's enough for my needs
I go with all my other 91mm's when i'm off, or go to the country, hiking, etc...If you can find a store that has many models you should check them out, try them and then decide for yourself based on your taste and needs. Nothing better than trying stuff out and holding it in your hands for the first time. On line buy is handy and practical but only when you know and handled what you are buying, IMHO anyway...

-
Personally, I prefer the Victorinox scissors too, but the Wenger ones are still more than acceptable.
The only downside that I've found is in trimming nails. The serrations leave a very rough finish to the nail, but the Wengers also have a nail file, so that's easily fixed.

-
Yep, the show stopper for me are the self sharpening scissors... never did prefer them... gotta have scissors on my SAKs... but that locking bottle opener /flat sd sure is nice...
Sent from my iPhone using Tapatalk
-
Still on the scissor's topic, here's a good topic about Wenger scissor's and a comparison with Vic's with some good pics on several sizes

</topic/50635
and more Vic info:
http://www.sakwiki.com/tiki-index.php?page=ScissorsA great pic comparing all Vic's sizes:
-
@MacGyver said:
Still on the scissor's topic, here's a good topic about Wenger scissor's and a comparison with Vic's with some good pics on several sizes
</topic/50635
and more Vic info:
http://www.sakwiki.com/tiki-index.php?page=ScissorsA great pic comparing all Vic's sizes:
Thanks for all the awesome info MacGyver! Can't wait to look through these threads as soon as I get a chance.
So I was wrong thinking the Evo series having Vic scissors, I should have known from the pics and as you pointed out with the leaf spring vs lever.
I will say I am very impressed with the scissors on my deluxe tinker - I didn't think they'd compare to well to the micras I'd been so used to but I was wrong. They work great and I enjoy having them handy. In fact I've been carrying the SAK this past week and leaving the micra behind. Luckily I have three kids I can pass down to ha ha.Also I have to apologize for hijacking this thread. And then to learn that the evo series aren't even true 84mm's, jeez! I did start taking a fancy to that wood evo 14 as well, but read a review on Amazon that it was about as thick as the explorer, and I think someone also pointed out earlier that the evo scales are quite thick. So, maybe that wouldn't be downsizing at all. As you say MacGyver - nice to handle a few at a local store and yes, I have plenty around me.
-
@MacGyver said:
Still on the scissor's topic, here's a good topic about Wenger scissor's and a comparison with Vic's with some good pics on several sizes
</topic/50635
and more Vic info:
http://www.sakwiki.com/tiki-index.php?page=ScissorsA great pic comparing all Vic's sizes:
Love all this info MacGyver! Awesome

From what I can tell, my deluxe tinker was made sometime after 1991 as it has the cup shaped spring end which rides in a groove, but still uses a screw on the pivot vs a rivet. I couldn't quite tell when Vic switched from screws to rivets - the article just seemed to mention Vic went from steel rivets to nickel-silver alloy sometime around 2007. Just love this info though, thanks so much!
-
@Faddy Daddy said:
Still on the scissor's topic, here's a good topic about Wenger scissor's and a comparison with Vic's with some good pics on several sizes :cheers:
</topic/50635
and more Vic info:
http://www.sakwiki.com/tiki-index.php?page=ScissorsA great pic comparing all Vic's sizes:
Love all this info MacGyver! Awesome :like:
From what I can tell, my deluxe tinker was made sometime after 1991 as it has the cup shaped spring end which rides in a groove, but still uses a screw on the pivot vs a rivet. I couldn't quite tell when Vic switched from screws to rivets - the article just seemed to mention Vic went from steel rivets to nickel-silver alloy sometime around 2007. Just love this info though, thanks so much!
You're welcome mate, glad i could help in any way :cheers:
This forum has a world of info on tool evolution and details and lot's of great member's with lots of knowledge, much more than me, i'm sure some of the experts can shine even more light on some of those questions.
If you're interested in info on Vic's tool evolution, this topic and this site are great to learn about tool evolution by year:
</topic/51872
http://victorinox.metodi.me/91mmtools.php#scissors
And some great pictures too :tu:
-
@Faddy Daddy said:
Still on the scissor's topic, here's a good topic about Wenger scissor's and a comparison with Vic's with some good pics on several sizes :cheers:
Wenger serrated scissor blades...
....they are often stated as being self-sharpening. Is this actually a fact, and can anyone explain how their serrated blades can self-sharpen, whilst Vic bl...
Multitool.Org Forum (multitool.ninja)
and more Vic info:
http://www.sakwiki.com/tiki-index.php?page=ScissorsA great pic comparing all Vic's sizes:
Love all this info MacGyver! Awesome :like:
From what I can tell, my deluxe tinker was made sometime after 1991 as it has the cup shaped spring end which rides in a groove, but still uses a screw on the pivot vs a rivet. I couldn't quite tell when Vic switched from screws to rivets - the article just seemed to mention Vic went from steel rivets to nickel-silver alloy sometime around 2007. Just love this info though, thanks so much!
Some info here:
http://victorinox.metodi.me/91mmtools.php
Sent from my iPhone using Tapatalk
-
El Tourist
.jpg)
-
Was reading the latest here about 84mm SAKs and had a few pictures to share.
[list type=decimal]
-
The first is a comparison of the 84mm vs 91mm Golfer (I really like both)
-
The 2nd, 3rd, & 4th pictures are of an early 1970's Tinker




-
-
@strmliner said:
Was reading the latest here about 84mm SAKs and had a few pictures to share.[list type=decimal]
- The first is a comparison of the 84mm vs 91mm Golfer (I really like both)
- The 2nd, 3rd, & 4th pictures are of an early 1970's Tinker

-
Tourists...
.jpg)
-
Sportsman.

-
Small Tinker as always...


-
Small Tinker Too !
and Rambler for good measure

-
For those of you who EDC the Tourist, how do you handle the lack of scissors?
Carry a Classic or similar?
Sent from my XT1635-01 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
