Holy crap what a day....
-
I always keep ductape and wire in my fixin kit, but I dont know how that would have fixed a broken trailer. Hmmm. How many rolls of ductape = a proper weld job? If you had a drill maybe enough holes and wire through those, with tape on top would have worked. I hate not being able to fix something.
And reading about paddling in heat with no water made me tired and thirsty. Glad I just have to read about it and not do it!
-
Maybe you should have greased your ball...

/topic/73217
Good point!
When in doubt, grease your ball

-
A day paddling on the lake is still better than a day at work, even when accompanied by a comedy of errors.

-
Maybe you should have greased your ball...

/topic/73217
Good point!
When in doubt, grease your ball


-
Total clustersmurf today..... it's now almost 3 in the afternoon and I'm really not much further than I was when I headed out the door at 0730 this morning.
Megan is going to have to ditch me I the woods for a few hours and take her friend to the airport or she will miss her flight.
We'd be on the road right now but apparently the steel company I got the new tongue from can't count past two. I ordered (and paid for) four holes and I got two. Now I'm at a corner garage just outside the park waiting for the mechanic here to drill the other two holes which is costing more time and money.
Def
-

Never count on people that aren't a MTO member...
-
Never count on people that aren't a MTO member...
I not so sure if I would trust half of the MTO members. I mean do you really want me to show up and help?
-

Never count on people that aren't a MTO member...
I not so sure if I would trust half of the MTO members. I mean do you really want me to show up and help?
I'm usually the guy who holds the light.

-
If you were on the right side of the River I could have swung by.

Seriously though, it sounds like you have made it out of the Park and that the Trailer is now the problem.
Stay hydrated and if Megan doesn't leave you there for good I think you owe her an ice cream.
-
Holy hoppin' horse feathers!
Whatever you do, don't say anything resembling 'What else could possibly go wrong?'. Hopefully you've used up all your bad karma points.
We're all pulling for you big guy. Is there any help that could be given from a couple thousand miles away?
-
Whenever I see or hear of someone baking themselves lobster red I cringe, gotta be one of the worst things!
Pluses: The Girls hopefully had a good time, and your trailer will be better than it was yesterday.
Maybe time for an inspection to make sure there aren't any other cracks developing elsewhere? Bit of time spent now hopefully save a whole lot of extra smurfache in the future -
Man. I bet that was the best burger and beer of your life that night eh Grant?! Def worked for that one.

-
I bet you could have fixed the trailer yesterday if only you had a Vic Tinker, a paper clip, and some duct tape.

-
Note to self, get a small welder just in case.
I really hope this all got sorted. I hope you are again enjoying a cold one and some good food.
-
Hope everything worked out in the end!
It's not failure if you learn something from it
-
@Pablo O'Brien said:

Never count on people that aren't a MTO member...
I not so sure if I would trust half of the MTO members. I mean do you really want me to show up and help?
I'm usually the guy who holds the light.

I'm usually the guy who chases the light.

-
Sorry about all your trouble. Heck it's about time we had MT's available that could do all of this stuff! That and stronger duct tape.
-
Here's the saga of Day 2:
I left around 0730 to be at store #1 as soon as they opened, a place called Princess Auto, which is way out on the south east corner of the city. They have the coupler (the bit that hooks on the ball) but not the tongue, so I figure store #2, a dedicated trailer shop which is directly south of the city would be better. I end up talking to the service guy there and he says they can't hep me, but there's a place just up the road from them that builds trailers and they would be able to help. So, I go there, and guess what? They can help, but not until tomorrow.

Apparently the guy that cuts steel and drills holes is unavailable today, so I say that if they'd give me 20 minutes in their shop I can do it myself. Unsurprisingly, they said no. So, I ask them where in town I can buy steel and he mumbles something that sounds vaguely like a name, which is conveniently located in the south west corner of the city. Bear in mind, I live as far north as you can get and still be in the city, so I am really racking up the mileage.
On the way to the steel supplier I call my cousin, who lives in the city and is a mechanic, because I am concerned that I may just get the steel and may not get the holes drilled in it I need to attach the coupler and the trailer. I figure that he may have a drill press that I could use, or maybe he would do it for me. It turns out that he doesn't, but he suggests several suppliers that are in the end of the city I started in that would not only supply the steel, but also drill the holes. By this time I have arrived at the steel supplier in the southwest corner of the city and so I figure I'll see if they will do it there.
They agree to do it, but they need the coupler to use as a template, so I have to go and get a coupler. I head back to the trailer place, which seems like the closest option, but it turns out they don't have any in stock, but happily offer to order it for me. As I needed it ASAP, that really wasn't an option. So, off to the next place, Canadian Tire, which is just up the road from the trailer place. Guess what? They have couplers in stock, but not the right size, so more wasted time. Somewhat annoyed I head off to Princess Auto again, and get the coupler, some bolts and some cotter pins because let's face it, I just want to be ready for anything at this point. And, to be sure, I try the coupler on a 2" ball, which is what I have, just to ensure that I don't run into the wrong sized ball issue later, because that's just how my day is going.
I head back to the steel supplier, draw the guy a diagram of what I need, and where to put all four holes and follow the guy into the shop where one of the guys starts drilling the holes. Awesome. While he works I head back to the office to pay for it (damned thing ran over $100 for five feet of steel and four holes) and when I get back to the shop the bar is sitting there and the guy says it's done. Great, I am in a major hurry, so I grab the bar, load it into the Jeep and realize that the whole thing won't fit in, so I need to leave the lift glass open. I'm far too paranoid to drive like that usually, but I don't have much of a choice, so I strap the steel up with some ratchet straps that I carry everywhere and head out on the road.
A few blocks away a guy on a Goldwing pulls up beside me and says the back of my Jeep is open, and I assume he is talking about the glass, so I tell him thanks, but it is to accommodate the large piece of steel I just bought. I keep driving and a block later I see my spare tire in the passenger side wing mirror and I realize that the rear gate wasn't closed- the whole bloody back end of the Jeep is wide open.

I stop at the next red light on this busy, four lane street and quickly close it, feeling like a complete idiot.
By this time it's about 11am, and I am still an hour or so away from the park, which is way north, well past my place and into the next province. Our plan was for me to try and get the parts for the trailer as early as possible, then get the rental boat and paddle out to the campsite to help Megan and Sarah get back to the parking lot. I am hoping (quite desperately) that they have realized that I'm not going to make it, and that they decide to start paddling on their own, because time is running out for Sarah to make her flight home- and the ironic bit is, the airport is on the south side of the city and I have driven past it several times trying to get a few simple parts I need for the trailer.

I start heading off to the park and along the way I start to think that I really do need to cut the safety chains off the old tongue and attach them to the new one, so I pull off at a mechanic shop just before the park and ask to borrow a set of bolt cutters. The owner of the shop pulls out a small cordless angle grinder and the chains come off quickly and easily. Yay- at least one problem solved sensibly and easily.
I'm back on the road, still a good 10 kilometers at least from where the parking lot is that I am hoping the girls are headed to so I try to make it as quickly as possible, just in case I still need to make the hour long paddle to get them. I pull up to where my trailer is sitting in the bushes, quickly unload the steel and a few other parts then head down to the parking lot and beach area, where thankfully I see Sarah, standing proudly with the two boats. Megan had wandered off to look for me, because she hadn't heard from me since I left the day before- there's absolutely no cell signals in that end of the park, so she hadn't gotten any text messages or anything since we launched. Since I hadn't shown up to get them she started to get worried that maybe I had capsized and drowned in the terrible little rental boat.
I tell her that they need to take the Jeep and get Sarah to the airport, then come back for me, assuming that I can kill 2-3 hours working on the trailer and amusing myself. They are also watching the time and say they have an hour before they really have to be gone, so they will wait until I can assemble the trailer parts, which really shouldn't take long. I also need to splice the wires so the lights work, but we decide not to bother with that because we just don't have the time and the girls don't want to leave me behind.
That leaves us lots of time, because installing the tongue only takes a few minutes- it's a five foot long hunk of steel (I'd bought steel twice as thick as the old one, so much heavier- if something breaks I believe in upgrading rather than simply replacing) with holes at both ends- one end for the coupler and one for the pin that attaches to the trailer. Very simple system, and it should look like this when done:

The bracket you see on the left is the front tongue bracket, and the tongue just sits on the pin there, so no need for a hole. The one pin that holds it, seen close to the center of the photo is simple and doesn't need tools, so that's super easy. I brought my wrenches and ratchets to bolt on the coupler and we are on our way, right?
Wrong.
The smurfing piece of smurf smurfholes at the steel place only cut holes to bolt on the coupler, they didn't cut the holes for the safety chains or the pin, which means I can attach the coupler or I can attach the trailer, but not both. And, I was in such a hurry I just grabbed it and ran without checking it.

The hour that we have left before Sarah absolutely needs to be at the airport is then spent going back to the garage and getting the mechanic there to drill the holes for me- but as he doesn't have the super powerful drill press that the steel place does, this takes a lot longer than I am comfortable with. As soon as it is ready I take off back to the park, programming the GPS for the airport as I go. I get to where the girls and the trailer are and I notice that they have been packing the gear up, which is great because it's one less thing I have to deal with.
When I arrive, I don't even shut the Jeep off- I get out and just say "Good Bye" and get the girls on the way. I have everything I need now, so I can get started while Megan takes Sarah to the airport, then stops at home to get the dogs out, since she has to drive right by it on the way to and from the airport anyway.
Literally minutes after the leave the tongue is installed, the safety chains and coupler are bolted on and the trailer is (mechanically at least) ready to go. Since I have tie to kill I figure I will start trying to splice together the trailer wiring that got shredded the day before, when the trailer broke. Needless to say, it was a slightly involved job...
This is the Jeep end:

And this is the trailer end:


For those not familiar with trailer wiring, there's actually four different wires in there. :ahhh
No problem, I have time to kill so I sit down and figure I'll take my time with an OHT and some electrical tape and clean it up a bit and splice them back together. It's a simple job, just a bit time consuming, but I have time so why not?
As I'm doing that the bugs start driving me nuts. I am super tasty to bugs. I produce at least three times as much of whatever it is that bugs are attracted to, as usually no one else gets bitten and I will come home with hundreds of bites. No problem- out comes the Ben's bug spray, loaded with DEET and I spray the hell out of myself. I don't care if I get so toxic that my father starts to retroactively start to experience birth defects, I needed those friggin bugs away from me.
The good news is, it worked. The bugs started keeping their distance, which made me happy and I got back to trying to clean up those shredded wires.
And that's when the rain started.

Def
-
A big bundle of type 2 fun right there. Glad you got it sorted.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login