Showcase: Mods to plier-based multitools
-
Great idea DT! Sweet mods too.

Tool Name: MP400 Bladeless
Basis: Gerber MP400
Aim: Making it UK legal
Mods: Blade removed. Woodsaw from Gerber Suspension added. Also metal file from MP600 added. 1/4 inch hex bit modded to fit philips driver. Full tool compliment: Pliers, wood saw, metal file, cap lifter, scissors, philips driver, large, medium and small flathead drivers.
Links:</post/0#new>


-
Awarded.

-
@magentus said:
Great idea DT! Sweet mods too.
Tool Name: MP400 Bladeless
Basis: Gerber MP400
Aim: Making it UK legal
Mods: Blade removed. Woodsaw from Gerber Suspension added. Also metal file from MP600 added. 1/4 inch hex bit modded to fit philips driver. Full tool compliment: Pliers, wood saw, metal file, cap lifter, scissors, philips driver, large, medium and small flathead drivers.
Links:</post/0#new>Thanks magentus!

Perfection would be attained by adding at least a pic or two ;)

-
Great idea DT! Sweet mods too.

Tool Name: MP400 Bladeless
Basis: Gerber MP400
Aim: Making it UK legal
Mods: Blade removed. Woodsaw from Gerber Suspension added. Also metal file from MP600 added. 1/4 inch hex bit modded to fit philips driver. Full tool compliment: Pliers, wood saw, metal file, cap lifter, scissors, philips driver, large, medium and small flathead drivers.
Links:</post/0#new>Thanks magentus!

Perfection would be attained by adding at least a pic or two ;)

Donzo!

-
Great idea DT! Sweet mods too.

Tool Name: MP400 Bladeless
Basis: Gerber MP400
Aim: Making it UK legal
Mods: Blade removed. Woodsaw from Gerber Suspension added. Also metal file from MP600 added. 1/4 inch hex bit modded to fit philips driver. Full tool compliment: Pliers, wood saw, metal file, cap lifter, scissors, philips driver, large, medium and small flathead drivers.
Links:/post/0#newThanks magentus!

Perfection would be attained by adding at least a pic or two ;)

Donzo!

Ta guv'

Sent on my SM-G930F with Tapatalk
-
G'Day,
This is a cool idea

Tool Name: PST with saw
Basis: Leatherman PST
Aim: To make the tool 100% Aussie carry legal, and to see if it can be done.
**Mods: ** Added a SOG saw where the blade used to be
**Links: ** /post/1460541Pete
-
Tool Name: Leatherman Rebar VX
Basis: Leatherman Rebar
Aim: rendering it more versatile (inspired by the ST 300 VX above)
Mods: removed the lanyard ring, a washer, the fixed Phillips and the small flat screwdriver, and inserted a pair of scissors and a small and a large bit driver from a LM Wave in the handles. Some minor adjustments planned to the awl (thinning) and the wide flat screwdriver (pry bar notch). Am also considering replacing the file with a diamond version... I have a ST 300 file lying about but that will require quite some grinding.
Links: /post/1577627 - note: tools reordered since I tooks the pics in the linked post; see pic below for current status.
-
This is a cool idea

Tool Name: PST with saw
Basis: Leatherman PST
Aim: To make the tool 100% Aussie carry legal, and to see if it can be done.
**Mods: ** Added a SOG saw where the blade used to be
**Links: ** /post/1460541Pete
Nice... did you have to do anything to the saw to make it fit (drilling, grinding/filing)?
-
G'Day
Tool Name: A Workers Flair
**Basis: ** Leatherman Flair
**Aim: ** To add a file where the cork screw used to be. The tool had a broken cork screw and I had an idea to fill the gap with a PST II file. Same thickness and length was not a problem.
**Mods: ** Added a PST II file into the space where the cork screw is on a Leatherman Flair
**Links: ** /post/995199Pete
-
@Dutch_Tooler said:
Nice... did you have to do anything to the saw to make it fit (drilling, grinding/filing)?Thanks,
Yes I had to sand some of the top and the bottom to enable the tool to close completely. About 1,5mm from the bottom and 1mm from the top. The pivot hole is the same as the Leatherman tools. That was it.
Pete
-
Last one. ;)
Tool Name: Leatherman LBT (Lunch Box Tool)
Basis: Chassis is Leatherman PST, inside tools are a combination of the Leatherman PST, PST II and Flair
**Aim: ** To build a Leatherman that I can prepare and eat lunch with.
**Mods: ** I added a pate knife and a cocktail fork from a Flair into a PST chassis to eat lunch with. Added the PST blade to prepare lunch with and then filled the gaps with a scissors, can opener and some screw drivers.
**Links: ** /post/683928Cheers, Pete
-
Nice, thanks Pete

-
Nice ones Pete !

-
Tool Name: Leatherman Rebar / Diamond file mod
Basis: Chassis is Leatherman Rebar, file from a LM Wave or PST II
Aim: To add a Diamond file to the Rebar
Mods: Use a Wave file and re-profile to fit Rebar later tried a PST file as proof of concept
Links:/post/1309095
DSC09262_zpsubsxdi0b by SteveC, on Flickr

PST II file
DSC09622_zpsjbsejimp by SteveC, on Flickr
DSC09630_zps34macmvk by SteveC, on Flickr -
Excellent mods! Would like to see even more of them

-
Great idea for a thread DT

So many great mods so far

I will try and add to this one as well and would love to see even more members do the same

-
@SteveC said:
Tool Name: Leatherman Rebar / Diamond file mod
Basis: Chassis is Leatherman Rebar, file from a LM Wave or PST II
Aim: To add a Diamond file to the Rebar
Mods: Use a Wave file and re-profile to fit Rebar later tried a PST file as proof of concept
Links:/post/1309095
DSC09262_zpsubsxdi0b by SteveC, on Flickr

...
Now that is one great mod I might try to adopt too for my Rebar - I checked but the ST 300 file I have lying about is not diamond and that would be an excellent addition. Thanks Steve for the detailed pics

OneTwoThree questions - what did you use on the hard file material? Would a diamond cutting disk on a Dremel work? Did you add a nail nick or could you access the existing one well?Thanks for the encouragement Ponch
Am I right in guessing the Wave file above has found its way into your Rebar?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login