Leatherman Charge TTI (Cabela's Sec3D version: camouflage handles, black blades)
-
Unfortunate news to hear about the liner lock issue on your new Charge,
Good news to hear that you like everything else though! :)
A first impression after reading your post:
I've spoken with quite a few folks who actually <u>prefer</u> that the liner lock stops in the middle of the knife. Their thinking is that this gives the mechanism room to "wear in" over time, before the lock eventually comes to rest against the far side of its stroke.So it sounds like the lock on the serrated blade is the only real problem. Unfortunately I can't think of much else to do about it. (other than what you are already trying with the screwdriver.) Bottom line is that you are not going to feel comfortable using that blade until the width of the lock is at least fully engaged with the width of the knife blade.
I'm hoping you can get it worked in there relatively quickly?
-
First and foremost, excellent pics and excellent review. Thanks for the information on an interesting model! :D
Funny thing, I just dusted my ol' Charge (one of the first models when they were released) off and checked the liners. This tool had a lot of wear and tear as it was my belt tool when I was heading a governement crew at the Great Lakes Navy Base in Illinois.
All the liners, save for the serrated knife, engage all the way to the handle scale and actually produce an audible tink from striking said scale. The serrated knife lock egages less than halfway.
Looks like this?
Serrated knife blade-Poor engagement?

Plain edge knife/saw/file-Excellent engagement?

Now keep in mind that the tang of a liner-lock is beveled and not flat so that the liner has room to wear in. If the tang were flat it would be a much harder process to achieve a solid lock up with no blade play. Also, even if the liner engages all the way to the handle scale there is always a chance that the lock can disengage.
If you want to force to liner to engage 100% you have many options. I find fault with the screwdriver method because it does not mimick the natural wear of a liner which is what leads to full lock engagement through said wear. The best bet to cause full liner engagement is actually very simple.
-
Open and close that blade repeatedly and constantly for at least a few days. I am talking a few thousand open/close cycles. This creates natural wear on the liner and the tang as well as the stop block so the liner gradually moves over.
-
(Try at your own risk) You can try to "seat" the entire liner assembly by whacking the blade really hard on it's dorsal plane. Depending on the knife; you hit the blade really hard on a block of wood on either the edge or the back of the blade. I haven't figured out which works for which kind of knife. My CRKT liners seemed to seat better when whacked on the back of the blade (ala the "spine whack," even though this sounds backwards) but most of my other liner lock folders seemed to seat better when whacked on the edge side. Do this a few times, monitoring the lock movement and then combine this method with #1 and you should see a better seat.
Update
I looked over my Charge again and looking at the tangs of the serrated and plain edge knives I think the problem is not only one of overall lock engagement but of actual lock face engagment.
Serrated knife (lower right)-Check the wear on on the tang from the lock face. This spot of wear is not nearly as full as on the plain edge blade. This looks to be a problem with the face of the liner not being ground properly and not engaging all the possible surface area. The picture shows it pretty well; the origin of wear on the serrated blade is about half as wide as the plain edge blade. This means the serrated knife is only getting half the locking strength. This combined with the poor engagment translates into a poor lock.
I'm going give ol' Leatherman Co. a call next week since I need to send the Charge back for a new bit driver anyway and see what they say.
It does suck having a new tool with defects but at least the other dozen or so tools work pretty well.

-
-
Only the liner locks on the serrated knife bothers me, the others are perfect (with a little help from the screwdriver method). And I know I'm going to sort out the serrated knife lock one way or another, so its just a matter or working at it. So i'm not too bothered, bit annoyed that LM seems to have a problem with their QC, but it doesnt detract from how fond i'm growing for this tool. It just feels right in my hand, compact and rugged, and the colour combination makes it look stunning.
I forgot to take a photo of the camo sheath, it also looks good. I'll post one later, hopefully when i'll be able to post pics of the serrated blade liner lock working perfectly :)
-
Hey Raukodur, any improvement in the lock engagement on that serrated blade yet?
-
Unfortunately not had much time to play with it. Since I recieved it the liner lock has improved very slightly, I would say 75% of it now slots underneath the serrated blade, still not the 100% that it should do.
Hopefully when I get my finals out of the way I should have more time to play around with it (so hopefully in a week's time)
-
With the awl and chisel bits Bob is so kindly sending me, and the metal saw, and the bit extender which can take normal hex bits aswell as increasing the reach of the bit driver, this is quite an amazing multitool. Everytime I play with it grows on me some more, I wish there were more situations where I would actually need to use it, havent done any DIY around the house for ages due to exams and revision.
The pic is from the LM website and shows all the tools they list the TTi as having, add onto that awl, chisel, proper metal saw, bit extender...
Very versatile tool IMO.

-
I really have got to get me a Charge....

Def
-
-
One right back at ya! :P

;)
I am certain the Charge problem with be solved very soon....
Def
-
:D
-
Only YOU can prevent Def going Chargeless.... :P
Def
-
Eeeek! :o That's almost too much pressure to bear!
Hehe, we should be able to get you all Charged up shortly though. 8)
-
Da da da DUM da daaaaaaaaaaaa!
<u>CHARGE!!!!!!!!!</u>
Oh boy I need to get out more.... ::)
Def
-
Just coincidence, but on my Charge, the serrated blade is the only one where the lock clicks up against the scale. I hope you'rs wears in well!
It's too bad QC cant catch all that stuff. But at the same time, think about the fact that people have complaints about lockup, bladeplay, fit & finish stuff with $100+ knives with only one blade! The Charge has four plus all the inside tools, bits, pliars, etc. Talk about a QC nightmare! And they have to do all this at a reasonable price! I'm actually impressed with how well they do compared to major knife companies that can have similar problems with their only blade.
-
Yup... you got me good!
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login