Something to help you date your Vic SAKs based on tool evolution
-
Back of main blade tang has no stamp.
.jpg)
%201.jpg)
.jpg)
.jpg)
-
El Corkscrew, thanks a lot! That's I need!
But! It has an awl without bevel on the tip, is not it? According to my observations, this type of awl was produced in 1983-1985. It is strange - in 1973 it must have bevelled awl, I suppose. Am I wrong? -
Cool pics. I have the identical toolset but Hoffritz blade (plastic tweezer, looks like stainless Hoffritz inlay and Vic shield) and what looks like a replaced spring on the exact same scissors (2,5mm pivot).
I was thinking that the spring should be a silver double one with the smaller eye. So is that a single black leaf spring or a broken black early mild steel spring?
Thanks.
-
@VoetSak said:
I was thinking that the spring should be a silver double one with the smaller eye. So is that a single black leaf spring or a broken black early mild steel spring?I have the same suspicion. The spring for 1973 must have a bit different form. So, I suppose, this Explorer is a bit younger.
But, Julius T. Verd said, that blank stamp instead of Officier Suisse Crossbow was produced in 1974-1975. And according to SAKhome.com it is true for Elinox stamped knifes. Heh, this knife is quite strange.
2 Huntsman:
Great job. I have something to add and change, may I? -
@Frater_Martin said:
El Corkscrew, thanks a lot! That's I need!
But! It has an awl without bevel on the tip, is not it? According to my observations, this type of awl was produced in 1983-1985. It is strange - in 1973 it must have bevelled awl, I suppose. Am I wrong?I haven't seen a lot of consistency with the bevel on the awl. I think they went back and forth with different models through the 70s
-
I know jazzbass has commented about the common years the Tang stamp was blank. I believe it was 73,75 and 77.
-
Great project Huntsman!

I have a few corrections to suggest.
LNF: In the linked "Vic tools" document, Victorinox writes "1942 new screwdriver with cap lifter, nail file with nail cleaner on the back of the knife". This is in agreement with the fact that one certainly encounters SAKs with an LNF from the 1940's, so I think that the start date for the LNF should be changed to 1942.
Main blade: In the polished version of the "Vic tools" document, Victorinox writes that the thickness of the main blade shank on 91mm SAKs changed from 2.4mm to 2.0mm in 2004, whereas the tang stamps changed only in 2005. This is in agreement with the fact that one encounters SAKs with a 2.0mm shank and V*SSR/+^OS stamps. They are relatively scarce, but not more than what should be expected for about one year of production. The first attached image shows this evolution.
Awl: There were actually three distinct changes made to the awl in the 1980's (currently only the first two of them appear in the table). The third change involved the shape of the awls with the sewing eye. The first generation of them had a tapered shape which is very similar to that of the last generation of awls without a sewing eye. After about 1-2 years they changed this to the current shape of the awl, which is actually intermediate between this tapered shape and the pre-1983 beveled shape. With this current shape the awl has roughly uniform thickness from its base to about 2mm above the eye and then there is a a kind of moderate bevel over the last half inch (or so). The second attached image shows this evolution.
Saw: Before reaching its current form in the mid-1960's, the wood saw on Victorinox SAKs was actually one of the most frequently changing tools. I can think of 9 different variants that I am familiar with on 91mm SAKs (and I expect that there are probably more). Some of the changes involve going from variants that have more teeth on the left side to variants having more teeth on the right side and back. Indeed, it may be worthwhile to start a separate thread to discuss just saw evolution. In terms of the parameters that are currently in the table (and which seem to consider only 91mm SAKs), I can offer the following corrections:
Teeth counts: When Victorinox moved away from 27 teeth in the early 1950's (I believe that 1953 would be a better estimate than 1952 for when this happened), they first changed to a saw version that had 39 (much smaller) teeth. Only after a few more years (but well within the open rivets era, so I believe that 1956 should be a reasonable estimate for when this happened) they changed this to a saw version with 29 teeth. The third attached image shows this evolution.
Nail nick: The nail nick on wood saws for 91mm SAKs persisted well into the hidden rivets era. It was removed sometime in the 1957-1961 period. I believe that 1959 should make a reasonable estimate for the time of this removal.
Change to the current saw variant with symmetric teeth: I'm quite sure that this happened before 1968 (because I never saw an earlier variant on a SAK with a keyring). I believe that 1966 is probably the right year for this transition.


-
Great stuff, Minichamp!

-
About backspring Philips driver:
A have practically the same table, but dates are a bit different. I do not remember the source for them.
And there was 5th generation of the screwdriver: I suppose it started to be produced in 1999 or next to it.
On the second picture old type in on the left and new one is on the right. I distinguish them on the tip: new generation has more flat tip and different angle of convergence: on the 3rd graph old type is green and new type is red.


-
Here is an extract of my article about the can/tin opener and cap lifter spring evolution. Briefly:
K1 had flat corkscrew surface
K2 had surface with little protrusion
K3, K4, K5 have different shapes of connected keyring tool.
-
On the picture there are 3 incarnations of inline screwdriver, at the spreadsheet 3rd one is missed.

-
And evolution of mag.glass/Ph screwdriver spring.
Somewhere it is written, that spring type of 1991-2002 was producing until 2007 for some knifes.
-
Minichamp, I have almost same classification of the reamers.
But I distinguish two types of pre-1983 reamer, but could not yet the time border between them.
Last two photos show both sides of transitional reamer of 1986.And I have the question: on the Internet the majority of sources claim that sewing eye on the awl was implemented in 1985, but some - that in 1986. There is the true?



-
There were two types of old magnification glass with holder made of grey plastic. Changing happened in 1986, I suppose. At least I have newer seen the oldest magnification glass after 1986.

-
Minichamp, this is for your collection of blade stamps of the crossbow:
In first variant the cross, crossbow and "C" touch each other, in second - not.
I think the change happened in 1994 or near to this.
-
Information overload. :ahhh

-
- Where he finds the elusive square SD with no file and no can key
Seems to be a bit of ... confusion maybe?... about the no file, no can key Phillips. Here's the deal - this exists in two forms:
-
Elinox Philips drivers from c. 1957-1970. As a matter of course ALL Elinox models (Motorist, Tinker, Hiker) got no file versions of the Philips. This is a cost saving measure - Elinox being the cheaper brand and all, not cutting the file in (and polishing it) saved time and thus money. You will see the occasional Elinox model with a regular "filed" Philips - not sure if these were "oops grabbed the wrong driver" or "uh oh we're out of Elinox drivers, use the regular ones until more are made" but they show up about 10% of the time.
-
All drivers for a brief period in the early 1970s, let's say 1971-2. This is basically the exact same as the can-key version, simply without the can key. By about 73 the can key is introduced and that's the end of those.
-
@El Corkscrew said:
Here are a couple knives which lead me to believe the wire scraper was no longer used in the early 70's. Still don't have an exact date but I want to say '72 or '73 Neither of these knives have the wire scraperThe scraper was dropped around 72 like you say. It was first dropped for a temp period in c. 1969, then brought back, then dropped again for good before 1974.
-
@Frater_Martin said:
El Corkscrew, thanks a lot! That's I need!
But! It has an awl without bevel on the tip, is not it? According to my observations, this type of awl was produced in 1983-1985. It is strange - in 1973 it must have bevelled awl, I suppose. Am I wrong?This awl probably just doesn't have the bevel ground on very well. In those days a lot of that would still have been done by hand, so variations like that are common. You really need to be able to see if the awl tapers or not - the 83-88 type awls will taper to about 50% of their thickness at the point. The older bevel awls have very little taper - maybe 80% of their thickness at the tip.
-
@El Corkscrew said:
Here are a couple knives which lead me to believe the wire scraper was no longer used in the early 70's. Still don't have an exact date but I want to say '72 or '73 Neither of these knives have the wire scraper
The scraper was dropped around 72 like you say. It was first dropped for a temp period in c. 1969, then brought back, then dropped again for good before 1974.
Thanks JB!!! Great info!
That explains a Spartan with bail and no scraper I recently got.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login