A knifeless Kick, of sorts.
-
Awesome job! Re assemble the rest of the pieces and send them back to Leatherman as a warranty claim! I'll bet that would confuse the heck out of them! :D
Def
-
Nice job of customization sir! 8)
I must say that while your choice of implements wouldn't suit me personally (I require a knife) I do like the idea of being able to mod a tool to suit one's needs!
-
@Corrugated said:
That's cool...how much did the two tools cost?Did you use two vise grips to take apart the tools..or something else?
I bought the Blast by itself for 27$ with free shipping and the Kick as part of a lot of other tools for 12$ with shipping. eBay has been excellent this month with the multi-tool pricing. Prior to bidding on the Kick I was outbid on a NIB Black Oxide Kick with free shipping that went for 7.98$! :(
I actually used my Leatherman Crunch and an Irwin Vise-Grip. I didn't bugger any of the screws too badly but next time I will either heat the fasteners with a soldering iron or a quick boiling water dip before trying to break the loctite.
I am thinking about the implements though. I may trade the medium flathead for the large one instead and may drop the bottle opener in place of a much shortened knife blade. Even though I rarely, if ever, use the blade on my multi-tools it feels really weird not to have one sitting there. Other than that I am very happy with it.
Awesome job! Re assemble the rest of the pieces and send them back to Leatherman as a warranty claim! I'll bet that would confuse the heck out of them!
Def
Now that I'm thinking about it I may take the two handles from the Blast, fill each up with as many implements as possible and make 2 "toolbox" type tools out of them. I would have to ratchet up the tension to keep the implements from partially-opening in the pocket and such. Hmmm...
-
Another thing to try while using the vise grips (or technically "locking pliers" ;D)...put a rag or some leather scraps around the nut before you clamp down on it..it might prevent bending or marring the heads.
-
Nice Job, I like it. Anytime I try to take one of the LMs apart that have those screws I mess them up pretty bad.
-
Spoonrobot, nice mod... i liked 8)
why didn't you use the handles of the Blast to retain the locking capabilities? ???
-
@Chaka said:
Spoonrobot, nice mod... i liked 8)why didn't you use the handles of the Blast to retain the locking capabilities? ???
In short; I wanted the smallest, lightest full-size tool with the most useful implements. The best way to do that was to use the Kick chassis. The Blast and the Fuse both feature locks for the implements but they are both thicker than the Kick and the lock system does add bulk to the tool. By using the Kick I was able to cram as much into a little as possible; leaving me with on the items I ever really need.
-
Looks sweet! Too bad you couldn't reverse the pliers to make it an outside-opener. I'd love to do that with my Core. Then -that- would be -my- A+ perfect multi like you have now.
-
Have you had an opportunity to carry your blasted Kick very much yet Spoonrobot? I'm wondering...does having the pocket clip on the end opposite the plier head tend to cause the tool to flop open during carry?
-
I've been carrying it to work this week and so far it's working very well. I love being able to carry tools normally only found in larger/heavier multi-tools in such a smaller/simpler tool.
At work, I generally carry the tool is my back left pocket so the unclipped handle sits against the seam of said pocket and effectively keeps the tool shut. When I'm just poking around town and such I keep it clipped to my left front pocket which means the clipped handle is against the seam and the tool is not sealed by said seam. In the latter configuration there is a chance for the tool to fall open but so far it hasn't happened, the tool stays shut pretty tight so I don't think it will be a problem.
The Leatherman pocket clip set-up is a little loose though. It's nowhere near as tight as the 2004Wave/Charge set-up. I am very very glad they decided to introduce such a system on another of their models but it's not the best set-up.
-
@Spoonrobot said:
The Leatherman pocket clip set-up is a little loose though. It's nowhere near as tight as the 2004Wave/Charge set-up. I am very very glad they decided to introduce such a system on another of their models but it's not the best set-up.Are you saying that the clip is a little loose on the tool itself? Or that the clip does not grap hold of your pocket tightly enough, making the tool feel loose?
-
The clip is a little loose on the tool itself, no matter how hard you tighten the screw, due to the design set-up. The clip is held steady (straight up/down) by a tab that folds off to the side of the tool. The problem is that the tab is not 100% mating with the side of the tool so there is some wiggle (less that 1/4"). It's something I can fix, I just haven't yet. This is also something that may be limited to my specific tool, I haven't tried any other Kick pocket clips; they may be fitted better.
The actual clip tension is very good, tight enought to keep the tool from slipping but loose enough to readily slide in the pocket.
-
So are you just gonna squish that little bent piece of metal on your clip around a little more? So it comes up snug against the side of the Kick?
-
I'm on my way to make this modded Kick...I just bought a Kick for $12 shipped from Bladeforums, and I'll be on the lookout for a cheap Blast.

-
The Blast shouldn't be too hard to come by- they have been liquidating them at several stores, often in conjunction with one of LM's knives. I am certain that you'll be able to find some on eBay if you keep watch.
Def
-
@Defender said:
The Blast shouldn't be too hard to come by- they have been liquidating them at several stores, often in conjunction with one of LM's knives. I am certain that you'll be able to find some on eBay if you keep watch.Def
Yup, I've seen those on ebay...I'd like to get an opened/used one for under $20, but I'd pay a little more if it comes with a Leatherman knife. Then I'll need a Kick pocket clip for a few bucks..
It's not that I need another multi right now, but I'd just like to stick it to Leatherman for not making their tools with changing/modding in mind

-
Who needs another multi? I'm sure we all have enough to tools to rebuild Beruit ten times over!
Not that it will stop any of us from getting more!
Def
-
@Defender said:
Who needs another multi? I'm sure we all have enough to tools to rebuild Beruit ten times over!Not that it will stop any of us from getting more!
Def
haha that's true...Tool fanatics can rationalize another purchase by claiming it's for diffrent attire...this modded Kick/Blast is for pocket carry with a clip, my SOG is not, therefore I need to purchase two multi tools and a clip, spend a few nights after work with a few beers rebuilding them, buy a Dremel tool*, then hope for the day I need to carry a full size multi with a pocket clip. See it all makes sense.
*This might be the project that makes me actually buy a Dremel instead of borrowing the one at work...more tools!
-
Dremel= plug in multitool!
Def
-
@Spoonrobot said:
The clip is a little loose on the tool itself, no matter how hard you tighten the screw, due to the design set-up. The clip is held steady (straight up/down) by a tab that folds off to the side of the tool. The problem is that the tab is not 100% mating with the side of the tool so there is some wiggle (less that 1/4"). It's something I can fix, I just haven't yet. This is also something that may be limited to my specific tool, I haven't tried any other Kick pocket clips; they may be fitted better.The actual clip tension is very good, tight enought to keep the tool from slipping but loose enough to readily slide in the pocket.
I was just about to ask about the clip and then I saw your post. This was not Leatherman's best design...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login