Multitool TLC
-
I'm do pretty much the same as you guys with the WD40, Rem-Oil instead of 3-in-1 oil, toothpick and Q-tips. Never tried that floss idea, I'll have to give it a whirl next time.
The foreign substance that I despise the most in my multitool though is sand! Gritty, grindy, sand. Even one grain between the pivots gives me the heebie-jeebies.

I keep a small aerosol can of compressed air at my workbench to blow out my tools when needed. They sell the stuff rather cheaply at most office supply stores.
-
x2 on the sand. I hate that stuff! I once got some sand in my KF4, and it got up in between the aluminum scales and the steel liners. If I squeezed the handles I could hear the "scrape scrape" of the sand.
It eventually all worked its way out though. I also think I'll give that floss idea a try. -
-
Sand is nasty stuff. Few things send shivers up my spine like that grinding sound of solid grit in a SAK or multi. That's why I almost never take a SAK to the beach. If anything breaks there, well then that's just too bad!
Regular grit is terrible too, but sand is the bane of my tool existence. I almost long for poorly made tools when dealing with sand as the giant gaps allow for easier cleaning!
Def
-
@Defender said:
Sand is nasty stuff. Few things send shivers up my spine like that grinding sound of solid grit in a SAK or multi. That's why I almost never take a SAK to the beach. If anything breaks there, well then that's just too bad!Regular grit is terrible too, but sand is the bane of my tool existence. I almost long for poorly made tools when dealing with sand as the giant gaps allow for easier cleaning!
Def
Or carry a SOG when around sand...breaks down in two minutes.

I dropped a SAK in some dirt a few weeks ago while digging (it was in my front pocket)...GRIT! I gave it a good wash and it came out fine. Good thing the soil was kind of moist...it really didn't sneak between the impliments.
-
In my former life as a home brewing supply store manager I used to have access to a nice little pressurized water jet that I found to be very good for cleaning SAKs. It was a great little model that was adapted form a dental water drill, and it would clean anything. I am going to have to see if I can find another one one of these days...
Def
-
@knife-man said:
Toothpicks and Q-tip's indeed ::) :D.Uh oh, sounds like a normal person walked in on this conversation.
If I heard that some guy at work cleaned his normal tools that way, I'd think he was a little off his rocker, but here I am doing the same thing!
Now I want to go see if I can find my old water jet I had in junior high for my braces! 
-
I actually use Q Tips as well, although now I'm a little embarrassed to admit it!
Does it help if I say that I use a multi to squish the heads so they fit down inside the channels of a SAK?
Def
-
-
-
I also use the little stiff brush you get with electric razors . Also I find Bluetack ( the stuff you use to put up posters ) , just push it in the the hard to reach areas and when you pull it out the crap sticks to it . A good wash with washing up liquid , a rinse then a hair dryer and a little oil ( like 3-in-1 ) but not too much . Compressed air is good too .
Dunc
-
Flush the tool under the tap full on, dry it (and myself) with kitchen roll. When dry a large dollop of 3 in 1 oil (or Bisley gun oil) on the edge of the blades were they fit on the axles another on the center of the plier/cutter head, wiggle them about to spread it down into the jionts, then wipe all the excess off. Tried using liquid paraffin but too gungy so I am back to 3 in 1. Every now ad again I poke some oil into the inside of the pouch and spread it as best I can to try and stop any moisture build up. The water shifts all the muck out if any is sticking I will douse it with boiling water from the kettle and straight under the jet of cold water again, no tools needed and only takes about 5 minutes per tool.
Works for me and I use Gerbers.Dave
-
Okay, sounds like we've got several good suggestions about cleaning out the crud.
How about rust? What works best for getting rid of the little spots and speckles?
(SwissTool users, please bite your tongues!)
-
On my Leathermans I used wire wool and WD-40 .
Dunc
-
@J-sews said:
Okay, sounds like we've got several good suggestions about cleaning out the crud.How about rust? What works best for getting rid of the little spots and speckles?
(SwissTool users, please bite your tongues!)
What's rust? >:D
Is that what you get when you send a LM back for repair? >:D
Serious= Dunc has it right but I have also heard that if metal is badly rusted leave it in the freezer overnight. When it has a nice frost on the surface rub with wire wool. Never had to use it myself but apparently it lifts the rust to make it easier to polish away.Dave
-
WD-40 and a good wipe are all I've ever needed to get rid of rust... but I've never had a severely rusted tool. I'd be curious to here tips on this as well, especially how to get rust out of hard to clean areas where it can go untouched.
-
I swear by WD-40...although my pop uses some slick 50 brand spray lubricant that will free up any seized joint you'll come across..I used some on my supertool after some exceptionally dirty and dusty jobs..I used it with some paper towels and worked all the joints and it seems to stay in the joints longer than WD. I think this is because it has a higher viscosity than WD-40, and I think WD displaces water better. I also like to use a can of compressed air to blow dust and grime out of the nooks and crannies.

-
Just had a funny picture run through my head. I know some people with access to an air compressor use them to clean out their tools. I don't have any to use, and I was thinking about where I could go to use one. I remebered that they have compressors at gas stations to fill tires, and then I just pictured myself standing in a parking lot outside a gas station using the compressor to clean multi-tools...
Truly absurd! What won't I think of next. -

Seriously, these aerosol cans of compressed air are cheap, available at most office supply stores. They work great too.

-
Does anybody do anything special to prep a multi for long term storage? I've got some duplicates,and Ebay birds that I want to store properly.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login