Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

And so it begins.... (My adventures into Alox!)

Scheduled Pinned Locked Moved The Mod Squad
6.0k Posts 1 Posters 1.3m Views
  1. Home
  2. Tool Talk
  3. The Mod Squad
  4. And so it begins.... (My adventures into Alox!)
And so it begins.... (My adventures into Alox!)
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Syph007 Offline
    Syph007
    Global Moderators
    Posts: 9,842
    Syph007 Offline
    Syph007
    Global Moderators
    wrote on last edited by
    #5312 Quote Reply

      @tommywp said:
      Hey Syph - somewhere in this thread you mentioned the thickness in the TI scales vs cellulode plus scalesis about a plier layer. Was wondering if you could compare the thickness to Alox 93mms. Is a 91mm huntsman with TI the same thickness as a PioneerX, or are the scales basically the same?

      My Ti scales and alox are about the same thickness. The 91 mm tool layers are thinner than the 93 mm though. Well blade and opener layers. Saw and scissors would be the same.

      PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

      Modding thread : Here
      Website : WWW.SAKModder.com
      Facebook : SAKModder
      Instagram : robertjlessard
      Youtube : www.youtube.com/robertjlessard

      1 Reply Last reply
      • Toppskarven . Offline
        Toppskarven .
        Posts: 41
        Toppskarven . Offline
        Toppskarven .
        wrote on last edited by Toppskarven .
        #5313 Quote Reply

          @Syph007 said:
          It had to go on the front scales since the fold over inline awl would block it on the back. Works fine though.

          Could the inline awl be positioned on the same end as the main blade, i.e. on the front, and the drawer also be positioned on the front?) The fold-over would cover the drawer, but it would require no more than opening the awl to access the drawer?

          (This could make way for a "classic" marlinspike on the back...? :drool: :drool: :drool:)

          Posted using my electronic SAK scales

          The Swiss:
          -Live in Mountains.
          -Collect Gold.
          -Make intricate machinery and weapons.
          -Aren't concerned with the wars of men.

          DWARVES! THE SWISS ARE DWARVES!

          1 Reply Last reply
          • Syph007 Offline
            Syph007
            Global Moderators
            Posts: 9,842
            Syph007 Offline
            Syph007
            Global Moderators
            wrote on last edited by
            #5314 Quote Reply

              @Toppskarven . said:

              @Syph007 said:

              It had to go on the front scales since the fold over inline awl would block it on the back. Works fine though.

              Could the inline awl be positioned on the same end as the main blade, i.e. on the front, and the drawer also be positioned on the front?) The fold-over would cover the drawer, but it would require no more than opening the awl to access the drawer?

              (This could make way for a "classic" marlinspike on the back...? :drool: :drool: :drool:)

              No actually the inline awlnis too long to play nice and fit in one layer with the caplifter.

              PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

              Modding thread : Here
              Website : WWW.SAKModder.com
              Facebook : SAKModder
              Instagram : robertjlessard
              Youtube : www.youtube.com/robertjlessard

              1 Reply Last reply
              • Toppskarven . Offline
                Toppskarven .
                Posts: 41
                Toppskarven . Offline
                Toppskarven .
                wrote on last edited by
                #5315 Quote Reply

                  @Syph007 said:

                  @Toppskarven . said:

                  @Syph007 said:

                  It had to go on the front scales since the fold over inline awl would block it on the back. Works fine though.

                  Could the inline awl be positioned on the same end as the main blade, i.e. on the front, and the drawer also be positioned on the front?) The fold-over would cover the drawer, but it would require no more than opening the awl to access the drawer?

                  (This could make way for a "classic" marlinspike on the back...? :drool: :drool: :drool:)

                  No actually the inline awlnis too long to play nice and fit in one layer with the caplifter.

                  :think: thinking of what tool that could be opposite the awl... Gutting knife from a hunter? :drool: Nope that wont do... does electricians blade fit I wonder? :think:

                  Posted using my electronic SAK scales

                  The Swiss:
                  -Live in Mountains.
                  -Collect Gold.
                  -Make intricate machinery and weapons.
                  -Aren't concerned with the wars of men.

                  DWARVES! THE SWISS ARE DWARVES!

                  1 Reply Last reply
                  • Syph007 Offline
                    Syph007
                    Global Moderators
                    Posts: 9,842
                    Syph007 Offline
                    Syph007
                    Global Moderators
                    wrote on last edited by
                    #5316 Quote Reply

                      @Toppskarven . said:

                      @Syph007 said:

                      @Toppskarven . said:

                      @Syph007 said:

                      It had to go on the front scales since the fold over inline awl would block it on the back. Works fine though.

                      Could the inline awl be positioned on the same end as the main blade, i.e. on the front, and the drawer also be positioned on the front?) The fold-over would cover the drawer, but it would require no more than opening the awl to access the drawer?

                      (This could make way for a "classic" marlinspike on the back...? :drool: :drool: :drool:)

                      No actually the inline awlnis too long to play nice and fit in one layer with the caplifter.

                      :think: thinking of what tool that could be opposite the awl... Gutting knife from a hunter? :drool: Nope that wont do... does electricians blade fit I wonder? :think:

                      Nail nick would be on wrong side but might fit. The awl really only fits with the blade. I once shortened an awl to fit with caplifter but it looked weird.

                      PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

                      Modding thread : Here
                      Website : WWW.SAKModder.com
                      Facebook : SAKModder
                      Instagram : robertjlessard
                      Youtube : www.youtube.com/robertjlessard

                      1 Reply Last reply
                      • Toppskarven . Offline
                        Toppskarven .
                        Posts: 41
                        Toppskarven . Offline
                        Toppskarven .
                        wrote on last edited by
                        #5317 Quote Reply

                          @Syph007 said:

                          @Toppskarven . said:

                          @Syph007 said:

                          @Toppskarven . said:

                          [quote author=Syph007 link=topic=34772.msg1666110#msg1666110 date=1522175793]

                          It had to go on the front scales since the fold over inline awl would block it on the back. Works fine though.

                          Could the inline awl be positioned on the same end as the main blade, i.e. on the front, and the drawer also be positioned on the front?) The fold-over would cover the drawer, but it would require no more than opening the awl to access the drawer?

                          (This could make way for a "classic" marlinspike on the back...? :drool: :drool: :drool:)

                          No actually the inline awlnis too long to play nice and fit in one layer with the caplifter.

                          :think: thinking of what tool that could be opposite the awl... Gutting knife from a hunter? :drool: Nope that wont do... does electricians blade fit I wonder? :think:

                          Nail nick would be on wrong side but might fit. The awl really only fits with the blade. I once shortened an awl to fit with caplifter but it looked weird.
                          [/quote]
                          hmmmm... :think: what if the awl (and drawer :facepalm:) would be in its "normal" place at the "back", and marlinspike at the "wrong" side (i.e. front)...?
                          (just got really fixated on combining awl, drawer and marlinspike. Don't get me started on the rest of the tools i dream of.. :facepalm:)

                          Yeah, I know, probably gonna be an issue with the backsprings... :-\

                          Posted using my electronic SAK scales

                          The Swiss:
                          -Live in Mountains.
                          -Collect Gold.
                          -Make intricate machinery and weapons.
                          -Aren't concerned with the wars of men.

                          DWARVES! THE SWISS ARE DWARVES!

                          1 Reply Last reply
                          • Don Pablo Offline
                            Don Pablo
                            Posts: 15,329
                            Don Pablo Offline
                            Don Pablo
                            wrote on last edited by
                            #5318 Quote Reply

                              Hey Spyh, I’m wondering, do you accept parts commissions?
                              Like, say I wanted some 91mm brass liners like you already use, with 2.5 and 2.25mm holes instead of 1/8” holes?

                              Hooked, like everyone else. ;)

                              All hail the hook!

                              Merit Badges
                              Pen Challenge Modified SAK Challenge MTo Anniversary Challenge 14th Anniversary Anything Goes Challenge 30 Day Bladeless Challenge
                              1 Reply Last reply
                              • Syph007 Offline
                                Syph007
                                Global Moderators
                                Posts: 9,842
                                Syph007 Offline
                                Syph007
                                Global Moderators
                                wrote on last edited by
                                #5319 Quote Reply

                                  @Don Pablo said:
                                  Hey Spyh, I’m wondering, do you accept parts commissions?
                                  Like, say I wanted some 91mm brass liners like you already use, with 2.5 and 2.25mm holes instead of 1/8” holes?

                                  Nope everything I make has 1/8 holes.

                                  PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

                                  Modding thread : Here
                                  Website : WWW.SAKModder.com
                                  Facebook : SAKModder
                                  Instagram : robertjlessard
                                  Youtube : www.youtube.com/robertjlessard

                                  1 Reply Last reply
                                  • Don Pablo Offline
                                    Don Pablo
                                    Posts: 15,329
                                    Don Pablo Offline
                                    Don Pablo
                                    wrote on last edited by
                                    #5320 Quote Reply

                                      @Syph007 said:

                                      @Don Pablo said:

                                      Hey Spyh, I’m wondering, do you accept parts commissions?
                                      Like, say I wanted some 91mm brass liners like you already use, with 2.5 and 2.25mm holes instead of 1/8” holes?

                                      Nope everything I make has 1/8 holes.

                                      Okay. :cheers:

                                      Hooked, like everyone else. ;)

                                      All hail the hook!

                                      Merit Badges
                                      Pen Challenge Modified SAK Challenge MTo Anniversary Challenge 14th Anniversary Anything Goes Challenge 30 Day Bladeless Challenge
                                      1 Reply Last reply
                                      • Marc_in_NS Offline
                                        Marc_in_NS
                                        Posts: 2,612
                                        Marc_in_NS Offline
                                        Marc_in_NS
                                        wrote on last edited by
                                        #5321 Quote Reply

                                          I really love that SAK with the Maple Leaf...now you are pulling my heart strings... :)

                                          Merit Badges
                                          Birth Year SAK MTO Tool MTo Store User Fire Making Flashlight Paracord Titanium SAKMC ALOX with Scissors
                                          1 Reply Last reply
                                          • Huntsman Offline
                                            Huntsman
                                            Global Moderators
                                            Posts: 5,781
                                            Huntsman Offline
                                            Huntsman
                                            Global Moderators
                                            wrote on last edited by
                                            #5322 Quote Reply

                                              Me too ....

                                              Must have some Canadian in me somewhere :think: ??? :D

                                              Merit Badges
                                              Scale Changer OCD Squad Duct Tape Japanese PST Flashlight ALOX Colors Level 2 BO Tools Level 1 Birth Year SAK SAKWiki User Hacker EDC Pocket Dump Challenge ALOX with Scissors MTO Tool MTo Store User Santa
                                              1 Reply Last reply
                                              • HarleyXJGuy Offline
                                                HarleyXJGuy
                                                Posts: 8,856
                                                HarleyXJGuy Offline
                                                HarleyXJGuy
                                                wrote on last edited by
                                                #5323 Quote Reply

                                                  Super busy Sir?

                                                  I am going to need a drawer mod knife.

                                                  Please take my monies.

                                                  Merit Badges
                                                  LM Surge Challenge Level 3 Skeletool 30 Day Challenge LM Rebar Challenge SAK STACK Challenge 60 Days 30 Day TWEEN Challenge - 84 and 85mm SAKs Case XX 30 Day Challenge
                                                  1 Reply Last reply
                                                  • HarleyXJGuy Offline
                                                    HarleyXJGuy
                                                    Posts: 8,856
                                                    HarleyXJGuy Offline
                                                    HarleyXJGuy
                                                    wrote on last edited by
                                                    #5324 Quote Reply

                                                      @Syph007 said:
                                                      These little guys slip in here and there... pesky 58s!

                                                      Whats going on here with the pocket clip Robert?

                                                      I have a 58 you made for me a while ago with one of the pocket clips you put on bigger SAKs.

                                                      This one looks like it would be nicer though.

                                                      Merit Badges
                                                      LM Surge Challenge Level 3 Skeletool 30 Day Challenge LM Rebar Challenge SAK STACK Challenge 60 Days 30 Day TWEEN Challenge - 84 and 85mm SAKs Case XX 30 Day Challenge
                                                      1 Reply Last reply
                                                      • stoneshank Offline
                                                        stoneshank
                                                        Posts: 687
                                                        stoneshank Offline
                                                        stoneshank
                                                        wrote on last edited by
                                                        #5325 Quote Reply

                                                          Would be cool to buy spring plus scissors for 84 mm that you planned on tuning from 91 mm. That and two liners (I'm thinking of getting a cadet 2017 LE and add the scissors and upgrade the liners). That anything you'd be willing to do.

                                                          Just thought of the holes. You be willing too sell pivots and screws too? I realise this pretty much ends up with a lot of work but if you're willing then I'm interested!

                                                          • stoneshank
                                                          Merit Badges
                                                          111mm SAK Challenge
                                                          1 Reply Last reply
                                                          • Syph007 Offline
                                                            Syph007
                                                            Global Moderators
                                                            Posts: 9,842
                                                            Syph007 Offline
                                                            Syph007
                                                            Global Moderators
                                                            wrote on last edited by
                                                            #5326 Quote Reply

                                                              @HarleyXJGuy said:
                                                              Super busy Sir?

                                                              I am going to need a drawer mod knife.

                                                              Please take my monies.

                                                              I'm building a dozen pioneer x with drawer this week if you want one of those?

                                                              PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

                                                              Modding thread : Here
                                                              Website : WWW.SAKModder.com
                                                              Facebook : SAKModder
                                                              Instagram : robertjlessard
                                                              Youtube : www.youtube.com/robertjlessard

                                                              1 Reply Last reply
                                                              • armi101 Offline
                                                                armi101
                                                                Posts: 143
                                                                armi101 Offline
                                                                armi101
                                                                wrote on last edited by
                                                                #5327 Quote Reply

                                                                  So. First off I'm a fan of your mods. Both the 93mm and the 91. All very nice and excellent craftsmanship.

                                                                  I decided after reading most of this section of the forum to try to make an alox exlporer. After finally getting all the parts and tools I got some time in the shop last night. I present my version of an alox explorer (based off lots of input gleaned from this site. It's not perfect, but I'm happy.

                                                                  2 alox pioneers
                                                                  1 celidor explorer.

                                                                  I used the scissor rest from the 91mm explorer and a blade spring to make the scissor layer. I also used one of the 91mm liners with a new hole drilled. The pivots are the 1/8in.

                                                                  I'm pleased with the result. But there is an issue. The snap on the spring is weak, and the opener layer sits a bit low. I've been playing with this for most of the morning and i think with a little more tension in the spring it would all work.....any suggestions how to accomplish this?

                                                                  20180512_140409-1328x747.jpg

                                                                  20180512_140413-1328x747.jpg

                                                                  Merit Badges
                                                                  Hacker
                                                                  1 Reply Last reply
                                                                  • HarleyXJGuy Offline
                                                                    HarleyXJGuy
                                                                    Posts: 8,856
                                                                    HarleyXJGuy Offline
                                                                    HarleyXJGuy
                                                                    wrote on last edited by
                                                                    #5328 Quote Reply

                                                                      @Syph007 said:

                                                                      @HarleyXJGuy said:

                                                                      Super busy Sir?

                                                                      I am going to need a drawer mod knife.

                                                                      Please take my monies.

                                                                      I'm building a dozen pioneer x with drawer this week if you want one of those?

                                                                      Silver?

                                                                      Bah who am I kidding.

                                                                      Yes I would love one of them.

                                                                      Merit Badges
                                                                      LM Surge Challenge Level 3 Skeletool 30 Day Challenge LM Rebar Challenge SAK STACK Challenge 60 Days 30 Day TWEEN Challenge - 84 and 85mm SAKs Case XX 30 Day Challenge
                                                                      1 Reply Last reply
                                                                      • armi101 Offline
                                                                        armi101
                                                                        Posts: 143
                                                                        armi101 Offline
                                                                        armi101
                                                                        wrote on last edited by
                                                                        #5329 Quote Reply

                                                                          Ok. Quick update.
                                                                          Problems solved. The scissor rest on the spring was a little loose. I adjjsted the backspring by about 2 degrees. All fit tight. Snap is perfect.

                                                                          Thanks for the inspirarion.

                                                                          Cheers,

                                                                          Merit Badges
                                                                          Hacker
                                                                          1 Reply Last reply
                                                                          • Syph007 Offline
                                                                            Syph007
                                                                            Global Moderators
                                                                            Posts: 9,842
                                                                            Syph007 Offline
                                                                            Syph007
                                                                            Global Moderators
                                                                            wrote on last edited by
                                                                            #5330 Quote Reply

                                                                              @armi101 said:
                                                                              So. First off I'm a fan of your mods. Both the 93mm and the 91. All very nice and excellent craftsmanship.

                                                                              I decided after reading most of this section of the forum to try to make an alox exlporer. After finally getting all the parts and tools I got some time in the shop last night. I present my version of an alox explorer (based off lots of input gleaned from this site. It's not perfect, but I'm happy.

                                                                              2 alox pioneers
                                                                              1 celidor explorer.

                                                                              I used the scissor rest from the 91mm explorer and a blade spring to make the scissor layer. I also used one of the 91mm liners with a new hole drilled. The pivots are the 1/8in.

                                                                              I'm pleased with the result. But there is an issue. The snap on the spring is weak, and the opener layer sits a bit low. I've been playing with this for most of the morning and i think with a little more tension in the spring it would all work.....any suggestions how to accomplish this?

                                                                              Nice job. Its such a pain to fit tools on that frame that dont belong. I dont do that kind of work at all anymore. As soon as someone wants Mag/phillips or pliers its 91mm for sure.

                                                                              @HarleyXJGuy said:

                                                                              @Syph007 said:

                                                                              @HarleyXJGuy said:

                                                                              Super busy Sir?

                                                                              I am going to need a drawer mod knife.

                                                                              Please take my monies.

                                                                              I'm building a dozen pioneer x with drawer this week if you want one of those?

                                                                              Silver?

                                                                              Bah who am I kidding.

                                                                              Yes I would love one of them.

                                                                              I'll pm you.

                                                                              PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

                                                                              Modding thread : Here
                                                                              Website : WWW.SAKModder.com
                                                                              Facebook : SAKModder
                                                                              Instagram : robertjlessard
                                                                              Youtube : www.youtube.com/robertjlessard

                                                                              1 Reply Last reply
                                                                              • Don Pablo Offline
                                                                                Don Pablo
                                                                                Posts: 15,329
                                                                                Don Pablo Offline
                                                                                Don Pablo
                                                                                wrote on last edited by
                                                                                #5331 Quote Reply

                                                                                  What tools would you need to cut out and finish some brass liners by hand, besides patience and practice?
                                                                                  Was thinking of trying my hand at it... have some Al liners to use as a template.

                                                                                  Hooked, like everyone else. ;)

                                                                                  All hail the hook!

                                                                                  Merit Badges
                                                                                  Pen Challenge Modified SAK Challenge MTo Anniversary Challenge 14th Anniversary Anything Goes Challenge 30 Day Bladeless Challenge
                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 265
                                                                                  • 266
                                                                                  • 267
                                                                                  • 268
                                                                                  • 269
                                                                                  • 301
                                                                                  • 302
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. The Mod Squad
                                                                                  4. And so it begins.... (My adventures into Alox!)
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0