Victorinox Tang Stamps
-
Wow! Thanks Myron!
How interesting! Everywhere else I've seen and read the sewing eye and 1/2 stop Changes in 91mm occurred in 1985.
You must have gotten one of the very first ones it seems!
If I remember correctly, I recall jazzbass stating that the hole in the reamer occurred even later for the 84 mm line and a half stop for 84mm not until 2010
-
Great discussion. I think I can add a data point or two to the growing body of evidence. In 1980 I bought a 91 mm Tinker. On a camping trip in high school the can opener broke so I sent it to Victorinox. Rather than repair it, they replaced it with a brand new knife. I might have completely forgotten this little life event if it were not for the fact that I saved the paperwork from Victorinox in 1983. So presumably my Tinker would be 1983 at the newest.
It has these features:
- half-stop cap lifter/screw driver
- awl with sewing eye
- round Phillips s/d with can key slot
- front tang marking: capital V in VSSR
- obverse tang marking: cross touching bow, cross not touching I, bow NOT touching C (but I had to look close).
Also, please note that the key ring is missing because I filed off its attachment point when I went through this regretful "modding" phase back in the 1990s.
The paperwork from Victorinox is dated 7 September 1983 and reads "New Tinker." I've included a picture of the box, but I don't remember if this is my original box from my 1980 knife, or if it's what the 1983 replacement knife came in. I checked it for a year emboss on the bottom tray and there was nothing. The end of the sliding tray is stamped "Tinker."
Here are some pics. I hope this helps advance the discussion.
Kind regards,
Myron






That's what I'm asking for.
I spent two short years doing I.T. for a manufacturer, and even in that short time I learned that nothing gets changed on a whim where assembly lines and costing is concerned.
If I have a knife as positively factory dates to '84 as can be, and it has these two traits, then I had to figure both were in full swing sometime in 84, and talked about in the board room in 83.
What surprises me is that you have a knife with both features and it is dated new in September 83.
What surprises me even more is that you have a large V in the front tang. My 84 is normal sized, and my (purchased and presumably 88) has a large V.
So they either wavered back and forth through stock, or they had two separate lines producing main blades.
Either way, the large V, the sewing eye, and the half stop now seem planted firmly in 83.
Now let's see if we can get a confirmed '82 and see what that looks like
-
By the way, Myron, my 84 box is burgundy and different. Maybe that's your 80 box?
I think there's a thread on here about boxes where we could find that out.
Your misfortune back in 83 sure seems to have shed light on some time lines
-
@ThundahBeagle said:
By the way, Myron, my 84 box is burgundy and different. Maybe that's your 80 box?I think there's a thread on here about boxes where we could find that out.
Your misfortune back in 83 sure seems to have shed light on some time lines
Hi Thundah,
Yes, I think the box must be from my original Tinker. I have a number of the burgundy boxes with original knives, so I will conduct additional research tonight.
Thanks,
Myron
-
I recently got a new to me Explorer with features like you Thundah. VSSR, cross touching bow not I, half stop on bottle opener, grooved corkscrew, eye in Awl, bow NOT touching the letter C.
-
All is well thank you. I got it used so no box. Hope the picture shows well.

-
All is well thank you. I got it used so no box. Hope the picture shows well.
Ah. Regular sized V. Nice Aloha. Very much like mine.
Yup.
-
Somewhere on MTO (? ) there is a thread with photos that someone took off SAK liners and how those have evolved as well.
Anyone know who posted that?
-
Hello.
I got an Executive (Mcgiver fan, grew up with the series), yet the back spring on the scissor broke. I did some homework, it is not the 70's version due to the scissor spring type, yet i would like to know if it is one from the 80's when Mcgiver was full throttle, a thing of mine... In order for me to be clear on the repair request (repair or replace)
Thx in advanced.

-
I guess I wasn’t aware that MacGyver carried an Executive. But I just googled and sure enough he did use one in some episodes.
They’re inexpensive enough. Why not get this one fixed and then find yourself a period correct one to be your official MacGyver SAK.
-
This tang stamp is on a Cub Scout knife I just bought.

The knife:

I Googled, "54122 Victorinox" and it leads me to a blue Cub Scout Tinker such as this one.
I don't know what the 1702 indicates.I haven't seen this stamp on a cap lifter before and wondered if it appears on certain SAKs or during a certain timeframe.

-
Never seen that before! Quite interesting.
February 2017
-
It certainly looks like 54122 is the US product code - Right format: ie Starts with 5 and five digits! And you can google it!!
- But who would stamp a screwdriver that fits multiple products with a single product code?

The production date makes a bit more sense - But not much -
I get the year on a Soldier - But why YYWW or YYMM on a Scouts knife? ???FB - Did you buy it new? Does year 2017 make sense ?
- But who would stamp a screwdriver that fits multiple products with a single product code?
-
@Huntsman said:
FB - Did you buy it new? Does year 2017 make sense ?I bought it used from eBay and it arrives today.
As for the date code, it does seem possible, but odd since I've only seen two digit date codes stamped on the older tangs of the main blade.Thank you Reinier and JB for your thoughts on the date code. Here is the original ad from the auction.
https://www.ebay.com/itm/3-1-2-Victorinox-Ibach-Switzerland-54122-1702-Cub-Scouts-Knife-Stainless-Steel/283636317041?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 -
Could it be Troop number?
-
@FolderBeholder said:
Here is the original ad from the auction.
https://www.ebay.com/itm/3-1-2-Victorinox-Ibach-Switzerland-54122-1702-Cub-Scouts-Knife-Stainless-Steel/283636317041?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649Just found another auction with the same naming as in yours:
https://www.ebay.com/itm/3-1-2-Victorinox-Ibach-Switzerland-54122-1702-Cub-Scouts-Knife-Stainless-Steel/123932785904?hash=item1cdaf83cf0:g:tEsAAOSwQp5dnH27Looks little bit different, isn't it? :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
