Show off your Sak mod's!
-
Those pins look pretty good to me mate

-
That looks great Gareth.

Are you happier with the action than you were with the Alumnus?
I know you like your backside tools but that looks a top edc.Neil
-
Much happier, looking at the job I did on the original Alumnus it was no surprise the action was poor. :-[ I had damaged the back tool pin hole on the outside liner, that let the pin move slightly so it wasn't creating enough tension on the spring. Hence the flabby action.
This is certainly going into my EDC rotation paired up with a Waiter for the corkscrew and micro driver.
-
@Gareth UK said:
Much happier, looking at the job I did on the original Alumnus it was no surprise the action was poor. :-[ I had damaged the back tool pin hole on the outside liner, that let the pin move slightly so it wasn't creating enough tension on the spring. Hence the flabby action.This is certainly going into my EDC rotation paired up with a Waiter for the corkscrew and micro driver.
That makes sense. I have a problem with flabby action around my midriff, any advice on improving my action :( :P
Neil
-
Much happier, looking at the job I did on the original Alumnus it was no surprise the action was poor. :-[ I had damaged the back tool pin hole on the outside liner, that let the pin move slightly so it wasn't creating enough tension on the spring. Hence the flabby action.
This is certainly going into my EDC rotation paired up with a Waiter for the corkscrew and micro driver.
That makes sense. I have a problem with flabby action around my midriff, any advice on improving my action :( :P
Neil
Best to ask Flash that question, he seems to be doing some good work in that area. :D
-
I need a body mod :D
Neil
-
Very nice Gareth...
...will the next one have a saw?
:D -
Gareth that it an awesome mod! Wouldn't say no to carrying one of those myself.
Great work mate. :)
-
After a little pin bashing myself I see how hard uniformity is and I will just say I am VERY impressed with how your hammering job turned out, wonderful work

-
I finally finished off those oak scales for my Forester. It feels real nice in the hand now :)



-
they look amazing dave, great work mate

-
What Tinnie said, those look great. Oak seems to be an under used wood for knife scales but I have to say I really like them.

-
Nicely done Dave, that's <u>Wicke</u>d >:D ;)
Were the curvy bits as much of a pain as I'd heard (I've never rescaled a 111mm)?Neil
-
Very impressive mate. :)
-
Well done

-
Great job dude! It doesn't have a toothpick or tweezers, but you can always take out splinters and use as such (toothpicks at least...) :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
