All things paddling
-
I couldn't help myself- last night I added to the Lamontagne Fleet.
I am justifying it because my big fiberglass boat is taking too long to finish, and the guy that was going to clear coat it for me in in the hospital and won't be able to get at it for another month, and the season is almost over and I am missing paddling too much! :ahhh

Its a Sun Flight model, produced by Riot, a formerly Canadian company that went out of business a few years ago, and was bought up by a Chinese company. Riot is the same company that made my father's blue and white boat above. As you can see, the color and sizing very closely matches the Point 65 XO13 that Megan paddles.

This one is 12.5 feet long and is a hybrid whitewater boat, meaning that it (supposedly) works well in whitewater and as a light touring model. We will see, I haven't gotten it into the water yet, so I will reserve judgement until I do. But, I have been wanting a whitewater boat, so I am glad that I found this one. And, I was glad for the price- only $300 and it included a dry bag, skirt and paddle!

For that price, you may be wondering what is wrong with it.... well, it's not perfect. The seller told me he paid $1275 for it, and that may be true, but I can tell you that he got ripped off for it if he did. This is the cheapest version of the boat available. It has a cheap seat (to which they have added a seat pad) and the front storage hatch is molded in but was never cut open for use. The shock cord fore and aft of the cockpit is pathetically cheap and saggy, but I will replace that in minutes. The back hatch is complete, but there are no bulkheads, so the entire interior of the boat from bow to stern is open, with no dry storage, which is probably why they had a skirt and dry bag with it.



And perhaps the most obvious reason this was a cheap boat (well, ok, second most obvious, after the uncut front hold!) is that it was designed for use with a rudder, and yet one was never installed.

You can see the line holes that were molded in but never drilled (that's the teardrop shaped holes on either side) and the two holes in the molded in triangle where one would mount the blade rest, also never drilled, and the two screws in the stern for mounting the rudder housing. This is great because it will allow me to add a rudder later on if I so choose, but I may not as I am also well used to paddling without a rudder since I don't have one on my big boat.
With all that is "wrong" with the boat, what is right with it? Well, for one, the price was absolutely right for it. You'd have a hard time finding any boats for that kind of money, and even the cheap Pelicans usually go for that or more. For another, I like that I can shoot rapids and other whitewater with it. It will also be fun to surf in it when I get back to the ocean. It has a multi chined hull (exclusive design to Riot) that supposedly increases secondary stability and helps it track like a much larger boat- I will post pics of it later, but it's funny because it looks like a certain part of the female anatomy and that amuses the 12 year old in me. Also the length and color matching the Point 65 is also kind of neat. I'm not 100% in love with the color schemes on either of them, but it is cool that they sort of match... and in the end, color don't make it go no faster. :D
I'm going to clean it up today, and if all goes well, maybe get it into the water, and I will let you all know how it goes afterwards.
Def
-
Congratulations on the new boat, Def.
It's kinda nice to have a 'beater' kayak.
I prefer a rudderless kayak myself. I like using the foot pegs to brace against and can steer just fine with the paddle. But, I do like sealed bulkheads fore and aft--less water to pump out after a rollover and a bit more flotation. Still, dry bags can give you the same benefits.
Enjoy the new 'yak!

-
Great stuff Grant.
Now get it in the water quickly before it all turns to ice. ;) -
I'd be in the water right now if it weren't for the impending thunderstorm.

Def
-
These are the new paddles.

They are 230cm Seaclude paddles from Aquabound and they are absolutely mint. I doubt they have been used more than a couple of times. They have a really nice blade but since they have an aluminum shaft they are virtually worthless to me, even though these are roughly $100 paddles. I am tempted to try and swap the blades with the chipped ones on my bent shaft paddles, but I'll probably just list them for sale locally. I'd love to pass them to a forum member, but the shipping would be a killer. I am willing to look into it though, should anyone want them.
Def
-
Good job Grant best of luck with the new boat.
Did you get to paddle it yet ?Rudders don't seem overly common in Europe most boats I've paddled have skegs instead and probably because I learned to paddle without a rudder I dislike them.
-
Not yet, although it is raining so hard this morning that I could almost paddle down the street! :ahhh
I am hoping to get out later today, even if it's a short paddle.
Def
-
Looking good! I have similar kayakholders on my wj [emoji3]
Here are some pics from yesterday's trip paddling around in Gothenburg

Through an amusement park



[It's not failure if you learn something from it]
Nice gear, Kotts! And what an enchanting place in which to be paddling!
Yeah, my WJ has done well by me. A lot of people don't know that they have the same motor and same Dana 35c and Dana 30 axles that were in the CJ and Wranglers all the way up to 2006. So when wrangler driver look askance at my ride, I like to remind them I have the same power and gearing they have, with more passenger and storage, and more tow capacity.
I originally wanted an XJ, but settled on this. I like it
This very day, I am installing Iron Rock Off Road 2 inch lift springs, with new isolators, new Pro Comp shocks, and new Moog anti sway bar links. We will see what it needs from there.
I'm stoked about it
Some pics when done I hope?
[It's not failure if you learn something from it]
Kotts,
That phase of the lift is done. It does well around town and over potholes, and does well at highway speeds. It does NOT do well over potholes at highway speeds... I plan on replacing the Panhard rod (track bar), the tie rod ends, the steering damper and see where that lands me. If all is well, new tires and a dynamic alignment. I took a few pics but I'm headed to NYC right now and will have to upload later.
Maybe I will put it in the Jeep section
-
Keep in mind this is 19 years old and i pulled actual Chrysler branded shocks out of it. And the spring isolators were mush.
Rear quarter shot before lift...

-
Because of old springs, shocks and isolators, tgis thing was probably sitting an inch below stock. So the 2 inch lift probably raised it 3 inches in total, since the 2 inches is measured above stock.
Rear quarter shot after lift...

-
Pre-lift side view

-
Side view after lift

-
That neighbor's balcony gives me an idea what it would look like with a basket on top. Right now it has my Thule kayak stackers up there. And the CB antenna
-
@ThundahBeagle said:
Side view after liftThat looks really nice! My is also from - 99 and looks just as low as your first pic.. I do know for a fact that I have the factory setup still on.. Might just get new ones and get up to the "normal" hight again..
Congrats on a good job
[It's not failure if you learn something from it]
-
Side view after lift
That looks really nice! My is also from - 99 and looks just as low as your first pic.. I do know for a fact that I have the factory setup still on.. Might just get new ones and get up to the "normal" hight again..
Congrats on a good job
[It's not failure if you learn something from it]
Kotts,
Thanks! The normal height for these was fine. It won several awards when the model came out in 99, and while it was no rock-crawler, it was no slouch on trails. And with the factory tow package it could be rated and geared for as much as 5 thousand pounds tow capacity. Like yours, mine was probably an inch below stock the last few years, so the 2" lift raised it about 3" from where I had been. What an eye opener.
And to make this all paddle-related, later today I will post a pic with a kayak on top
-
Side view after lift
That looks really nice! My is also from - 99 and looks just as low as your first pic.. I do know for a fact that I have the factory setup still on.. Might just get new ones and get up to the "normal" hight again..
Congrats on a good job
[It's not failure if you learn something from it]
Kotts,
Thanks! The normal height for these was fine. It won several awards when the model came out in 99, and while it was no rock-crawler, it was no slouch on trails. And with the factory tow package it could be rated and geared for as much as 5 thousand pounds tow capacity. Like yours, mine was probably an inch below stock the last few years, so the 2" lift raised it about 3" from where I had been. What an eye opener.
And to make this all paddle-related, later today I will post a pic with a kayak on top
I'm looking forward to it! And thanks for the info
[It's not failure if you learn something from it]
-
I took the new boat out on the river a couple of days ago and had a blast. Normally do need to get the Go pro out and shoot some video on it to share with you guys. The bow site remarkably low in the water, and even in the mild chop I was in (about 30cm swell) the boat was constantly swamping! I was soaked and laughing the whole time! I think the boat may be part submarine because it seemed like it spent half the time underwater! You definitely need a skirt on this boat, but unfortunately it takes a different size than my other two. Both the others take a 1.6 and this one needs a 1.2. I have a few all purpose type skirts, which i will try but they generally suck and don't fit anything well or hold against much.
Def
-
Any of you paddlers interested in recreating the absolute coolest kayak trip ever?
From Nazi Germany to Australia: The Incredible True Story of History’s Longest Kayak Journey
With Germany in tatters, his small business bankrupt, Oskar Speck got into his kayak in 1932 for what would become an epic, seven-and-a-half-year paddle—30,000 miles, packed with hero’s welcomes and near-death escapes.
Vanity Fair (www.vanityfair.com)
A must read for anyone interested in history, paddling or adventure in general- why the hell aren't there movies made about this guy's life? I'd love to see that!
Def
-
Meant to post the kayaks on the Jeep four days ago. Here they are, Sunday night after being power washed at the local self-serve car wash

-
No action pics, unfortunately, as that would mean I would have had to have had time actually IN one of the kayaks. So far this summer, that has been elusive. But at least now I'm ready for late summer, early autumn paddling.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login