Celidor appreciation thread
-
hi everyone
i hope it's not a problem if i resurrect this thread. I just had a question: where do you guys buy the celidor scales? I mean, the only thing i can get here are red/black/white ones and pretty expensive.
Thank you -
@ghiekorg said:
hi everyone
i hope it's not a problem if i resurrect this thread. I just had a question: where do you guys buy the celidor scales? I mean, the only thing i can get here are red/black/white ones and pretty expensive.
Thank youI've bought off this ebay seller a couple of times so far and I think they're a Swiss company - good service, no affliation.
-
Try pizzini.at too.
-
Thank you Magentus, it look cool.
i tried to contact them as they only seem to ship to UK (kinda weird, i couldn't even find them on the german or swiss ebay) but i can't contact them due to the high amount of message they receive.
I will check pizzini too (funny name. In italy the "pizzini" are pieces of paper where they mafia bosses write the duty for the thugs :D )
Thanks hiraethus -
@ghiekorg said:
hi everyone
i hope it's not a problem if i resurrect this thread. I just had a question: where do you guys buy the celidor scales? I mean, the only thing i can get here are red/black/white ones and pretty expensive.
Thank youI can't really help much more with the international scale sellers than what's already been said, buy I'm curious... You are in Switzerland right...? There isn't any national distributor that you can buy at factory prices from...?
I mean... You are in the same country as the actual source/factory.... :ahhhThe more i see a lot of guys difficulties in getting scales (and other parts) at fair prices, the more lucky i think i am over here...
I buy them from my national importer that distributes from factory to stores at like 0,80€ plus tax (91/84mm) But they only sell them locally, at the office, and in small amounts, that's because every time o go there i always buy like 5 pairs of each, T&T's, micro SD's, pens, rings and scissor springs.Is not usually sold in stores over here, that's why they make that exception of selling them to the public, but they wouldn't sell me sak's or other stuff...The online stores charge ridiculous prices for scales and parts, much more so than for the actual sak's vs factory prices....
On a side note..... great threat, haven't seen it yet...

Cellidor models will always be number 1 for me :D -
I tried to write to victorinox directly. They are not really cheap on their knives on their online store, but they are for the accessories (I mean, the screwdrivers are 1.40 chf, the pin are 0.20 chf, the lanyard are 0.50 chf [1 chf= 0.90€]. Waiting for an answer. I still have to go deeper in the Swiss online market (often here the shops don’t have an online shopping section). I don’t really know it that well (side note: I couldn’t find ONE Swiss knife in 3 different second hand shops).
The shop mentioned by the others are pretty good. The pizzini shop is the cheapest I have seen so far. The only problem is the 20€ shipping. As soon as I find some fried that goes to Austria I will her/him to pick my parcel somewhere
Unfortunately Switzerland is a bit a closed market, not a lot of stuff gets in or goes out. Tomorrow I will try to search something local and in case I will post it here.
Buying them so cheap why don’t you sell them here? [emoji16] I mean, even if you charge them 50% or even 100% more they would still be cheaper than other shops (on eBay I saw them often around 15€)
Thanks everyone
Sent from my iPhone using Tapatalk
-
ghiekorg, https://www.swiss-knife.com/en/swiss-knives/handles-sides.html are located in Lausanne.
-
@ghiekorg said:
Buying them so cheap why don’t you sell them here? [emoji16] I mean, even if you charge them 50% or even 100% more they would still be cheaper than other shops (on eBay I saw them often around 15€)Naaahh....
couldn't be bothered with it... no time or patience to either have to go there regularly to get stuff, or to hassle regularly with posting and shipping stuff...And nowhere near enough time off work to go there (other side of town), even less on a regular basis. I only really buy stuff for my own use/backup. If anyone want's something very specific and it's in no rush, i can check out next time i go there, but no more than that i'm afraid... The last time i managed free time to go there on working hours was almost a year ago... :-\
And besides, they only sell the parts in very moderate amounts, also because they only have them in moderate amounts too. The last time i got something like 15 pairs of scales total, at once, i got a word of notice from their boss they couldn't really sell me in those amounts all the time..., so i always keep a very low profile in item amounts when i go there from time to time, so i don't get "banned"...

-
@Steinar said:
ghiekorg, https://www.swiss-knife.com/en/swiss-knives/handles-sides.html are located in Lausanne.Thank you.

-
One good point about cellidor is the range of available/collectible colours : it would be much more expensive to obtain a comparable range in Alox.


-
Technical point about the scales : after they switched to hidden pins there were, to the best of my knowledge, three consecutive types of scales.
Look at the picture below :-
the ones on the left, the older ones, kinda warp over time, a gap forms between the scale and the liner, and muck gets in ;
-
the ones on the right are the current issue, and, if you ask me, a disgrace. To save a couple of cents on plastic Vic sells you scales that are way too thin.
It is, by far, the weakest spot of the knife. If you need to do moderately serious work you must switch to nylon scales. -
the ones in the middle are almost solid, with that rim all around, that gives this nice suction-cup effect that keeps muck out.
Those have the thickness to take a beating and can be polished a couple of times. But they are long gone and no longer available. -
of course none of these will appreciate contact with a flame of source of excessive heat......

-
-
With the recent discussions on the preference for certain colors on certain SAKs, combined with the Great Alox Fever of 2020 arguably initiated with the release of the much-anticipated Farmer X, I've been thinking about the humble Cellidor scales on everyone's old friend the 91mm.
Over the years, Victorinox releases limited edition scales and diehard fans like us don't make as much as a peep about them. This year Vic released the Swiss Spirit Special Edition, commemorating Swiss food, music and culture. They released their annual Chinese New Year edition. Understandably, these are more expensive and impermanent, making them less attractive purchases. But like it or not, this is one of the things that Victorininox feels is important for them to do, year after year, regardless of popularity.
Set aside limited edition scales for a moment. What if... Victorinox envisioned a product that would be a "Companion for Life", and handed down to the next generation. What if it was the trauma plate on ballistic armor - meant to break, to safe what was behind it.? What if the scales are meant to make the knife personal, breakable, repairable, resilient... human?
When I was a small boy I would go to the cutlery shop with my parents. Nose pressed up against the glass display case, I would look at all the options - Spartan, Tinker, Huntsman, SwissChamp. Which one is a boy to get? Surely the biggest one is the best. But no - that doesn't feel right in the hand....
One decision was much easier to make ..... which color should I get? Red, or Black? Red would go well with my Scout uniform on the standard BSA belt clip. Norman Rockwell himself would approve of the color scheme even though they werent the Delrin scales of a Camillus. But black... black was sleek, distinguished, even Ninja-esqe. I'd be happy to carry that one anywhere. Decisions decisions...Even now, I could choose (IFF I could just choose) a 91mm Swiss Army Knife to hold on to until the end of my days. Victorinox will repair the tools and sharpen the blades. All I need to do to add a little personality to my Vic is to snap on some scales.
-
Gray scales would be nice...
random thought of the day
-
@ElevenBlade said:
Gray scales would be nice...random thought of the day
There are some I know of...
Swatch 58mm
One of the Battle series 91mm (Nafels and Sempach?)
Printed gray with the leaves in the design on while cellidor background.I’m sure there are more out there. And I’d like to see new ones that aren’t just printed.
-
Celidors are the richest red this side of a Ferrari. I love red, so I love Celidor SAKS. But there is more to the Celidor appeal than my color fetish and management stubbornness.
John Ruskin, I think it was, said things ought to look like what they are made of. He was referring to why Gothic cathedrals made of granite, though hard and grey, had a deeper beauty than their ornamentation and massiveness. He said Gothic cathedrals were deeply authentic because they looked exactly like what they were made of: granite cut from granite and stacked well. His was a profound insight despite his other vices.
Celidor SAKS look like what they are made of: plastic, aluminum, and stainless steel layered. The plastic scale looks like what it is: plastic. It is not trying to look like something else. SAKs get into design inauthenticity, only when Vic makes the plastic try to look like what it isn’t. Vic tries hard to avoid that inauthenticity by its choice of imagery for the special editions. It avoids plastic wood and instead opts for imagery on plastic. Vic never tries to hide that the scale is plastic, no matter what is on it. We don’t think the scale with a bike tire is trying to look like rubber. It is a tire graphic on plastic. John Ruskin would know the material he was looking at, if he knew plastic. Even so, the monochromatic Celidor SAKS are the most authentic scales. The pigment is literally in the resin. It is what it is—in the best not the worst sense of that now hackneyed phrase.
The Celidor SAK is iconic of the last 125 years or so, because its materials vocabulary embodies the three most characteristic materials of this era: Resinous plastic (vegetable oil-based, I reckon), aluminum and Stainless steel. Think about it. Knife snobs that think SAKs need M-390 either don’t get the SAK design vocabulary, or they don’t get practical function of these small machines for solving tool-problems. A knife is a tool for cutting. A SAK is a machine for solving tool problems.
These three materials—plastics, aluminum and stainless steel—that SAKs are made of defined and distinguished the 20th Century and early 21st Century from preceding centuries Perhaps more than any three other materials in pervasive use than copper, until the rise of silicon. But copper wasn’t ever used at every scale of design the way plastic, aluminum and steel were/are. Copper was for wire and pans. Nobody built a copper skyscraper, or a copper tweezer, and everything in between. We fight wars with plastic, aluminum and steel to control the markets for plastic, aluminum and steel. We even developed silicon and digitalization to help us do it. And think about this: vegetable oil and rock oil are not so far apart. An old Mercedes 300TD diesel could burn either petroleum diesel or vegetable oil. Oil is oil in some respects so plastic is plastic. So: when you hold a Celidor plastic, aluminum and stainless steel SAK in your hand, you are holding an object wholly of our time in your hand. Copper has been used for millennia. Not so Celidor.
Along these lines, SAKs can look very authentic and indicative of our time in G10 petro plastic for the same reason—perhaps even more so. Petro plastic is the jugular of our world despite the ascent of 1s and 0s and EMF.
Carbon fiber? Not so much yet. But maybe after the next war? Yes, if we survive it.
So what about the aluminum scales of the Alox models? For one thing using them leaves out oil—one of the big three—and so reduces the emblematic value of all three as an iconic material vocabulary. But Aluminum (or hiduminium as it used to be called in England to avoid the Mellon aluminum monopoly) still is one of the big three for sure. And aluminum looks absolutely authentic and of this time as used in the frames of the layers in a SAK. Those frames are the real look of refined, cast/stamped, machined Aluminum. But Victorinox has struggled to use aluminum in the scales authentically IMHO. Why? Alox scales are textured and anodized to give it a look and a feel that could be almost any metal given a texture and a color. It could be tin, or super thin steel, or what have you and thin steel ounce for ounce is stronger and so can be made even lighter and as strong as aluminum, or much stronger at the same weight. But Alox gives good function at low cost, because of ease of casting and machining (always the real reasons for using aluminum, not lightness) and relative softness makes it cheap and easy to give it any kind of texture they like (the machine tools last way longer with aluminum, etc, and casting dimples is cheaper than stamping them in steel). But at the end of the day, waffled, dimpled surfaces really don’t look like authentic aluminum, as the simple SAK frames do, and the rainbow anodizing, though eye catching, just looks like a candy coated, streamlined SAK, or a battery anodizing, not like aluminum. Only the silver grey SAKS look authentic but the texturing undermines it, the same as alligator texturing undermines the authentic look of a Pacific Northwest plate boat. Form should follow form, but the form added for that function does not always translate to authenticity of appearance in a materials vocabulary.
Bone Scales for a SAK? Puhlease! Bone is a wonderful material for traditional pattern knife scales from the 19th Century, but it is not emblematic of our dominant materials of war and peace the last century and a quarter, so it takes away from the machine era icon ism of the SAK. THE SAK is a last holdout of 20th Century Modernism that can be dolled up with Roy Lichtenstein scales and achieve post modernism. Bone just doesn’t work on a SAK IMHO.
Wood scales? Real wood maybe, if used as in Danish Modern wood trim on steel Intended to humanize the interface with the steel—if the wood looks like the wood it is. But even that diminishes the iconism of plastic, aluminum and steel.
Celidor is almost an anachronistic material, despite its excellent functional/cost characteristics these days, but it still is a kind of plastic in a plastic age that only wishes it could be pure silicon.
Modders are pushing the scales to G10 and Titanium. G10 can hunt as rock oil in a rock oil world, but here again they want to texture it. And g10s only real advantage of strength isn’t necessary in a sack with a frame, unless you get your jollies throwing your SAK at curbs.
Titanium? It’s got the cool factor, until it becomes ubiquitous as one of the big three. Despite being potentially cheaper than steel at comparable economies of scale (which will never happen), titanium seems a cool cul de sac to be superseded by graphene (or some equivalent) for 3D printing once CHINA-centric manufacturing wipes out all legacy manufacturing around the world, and in turn gets replaced by distributed, guerilla 3D manufacturing. Then knives, all or part, will have to look like graphene (or equivalent) to be authentic.
Or maybe authenticity of objects will die with hyper reality, where everything is fake and so the fake look is the authentic look.
I believe authenticity will survive one way or another, even though it may have to retreat to walled communities in a Neo feudal corporate future, if we aren’t careful.
But for now, the SAK with Celidor scales still speaks more authentically to me than all the other approaches to knives (and multi tools and Alox) in our rising tide of Baroque hyper realism and CNC change for change sake.
Caveat: if I really used my SAK in a harsh environment daily, and I could not afford $10-20 backup scales, then I would buy and use Alox exclusively and forego my love of red Celidor and SAK iconism and Ubiquity function of Celidor SAKs. But I can afford the backup scales and I have never needed them, so I don’t have to limit myself to ALOX.
Regardless, the Celidor SAK reminds that the real object persists amidst the fakery, whether or not the business model can. And while DHS and DIA may or may not shortly spring aliens from outer space on us, the moon and stars are still gonna be authentic.
And at the bottom of my pocket, there will still be a Celidor SAK waiting to solve tool problems in a color I love.
-
What he said, I think

-
@kamakiri said:
There are some I know of...Swatch 58mm
One of the Battle series 91mm (Nafels and Sempach?)
Printed gray with the leaves in the design on while cellidor background.I’m sure there are more out there. And I’d like to see new ones that aren’t just printed.
I've got one 74mm SAK with grey scales. There's a company logo on the back I think.

Top row.
-
Is it grey or gray?

-
So it's a grey area, basically :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login