Skinth Loadout Thread!
-
Got my Mondo shield last week but it looks my front pocket is too small. When i look at the site the bankcard should go in further, and it looks if my bit kit wont fit either. Cant close with bit kit and surge.
In My old l shield the bit kit rides way deeper.
Anyone seen this before ? I already tried to mail them but after almost a week still no answer.


-
That's pretty disappointing :(
-
Got a reply that it was redesigned that way beacuse they found it to deep

But this way it is unusabe with my surge, and with the wave the bit kit dit fit but fall out when bending over to much

Just a waste of 45usd
-
Does that line of stitching at the bottom join any material behind or is it just there to form the bottom of the pocket?
-
So I'm still hemming and hawing over which Skinth i should be buying. I find the promise of carrying my light in the same sheath with my Leatherman ST300 really attractive. I would really like to keep the light I edc now but it won't fit in the Skinth XL and I'm not sure I'll love the less compact Skinth OG where it is sure to fit. So, now I'm considering switching out my light from a Milwaukee 2×AAA penlight to a Fenix e12 in the hopes that it will fit in the XL.
I am hoping one of you fine folks has an XL, an ST300, bit driver, and a similarly sized light (3.5" × .75" or 90mm × 19mm according to manufacturer's website). To see if these things will fit together. Here's to hoping.

-
@superpaco said:
So I'm still hemming and hawing over which Skinth i should be buying. I find the promise of carrying my light in the same sheath with my Leatherman ST300 really attractive. I would really like to keep the light I edc now but it won't fit in the Skinth XL and I'm not sure I'll love the less compact Skinth OG where it is sure to fit. So, now I'm considering switching out my light from a Milwaukee 2×AAA penlight to a Fenix e12 in the hopes that it will fit in the XL.I am hoping one of you fine folks has an XL, an ST300, bit driver, and a similarly sized light (3.5" × .75" or 90mm × 19mm according to manufacturer's website). To see if these things will fit together. Here's to hoping.

The problem with the shield series and the Milwaukee AAA light is that the side tubes on a shield have closed bottoms.
So the 2aaa light will just stick out the top but any single cell light should slide right in there.Here is a Jetbeam AA light in an XL Shield and the Milwaukee in the open tube of an OG.
All Shield side pockets are closed on the end.

-
@HarleyXJGuy said:
Ok so the LM Bit Card will fit in the outside pocket of a L Shield like the pocket was made for it. Pretty sure it was btw.It will also fit in the main pouch with the Wave.
There is no way to fit both of them though. They will both fit but the flap will not reach to snap close and it is way to tight even if it did for my tastes.
Pictures.
Can I ask you what flashlight you have in there?
-
@BCNZ said:
I've had this OG+ for a while, it's had different configurations of tools/knives in it over the years, but for the last year-and-a-half it's been carrying these items and has lived mostly in the center console of my truck.
Is that a steel tube with screw cap?
Could you please tell me where you got it, or how it is called? -
... @reamer: my best guess is that we're encountering a pico pen...
-
I've had this OG+ for a while, it's had different configurations of tools/knives in it over the years, but for the last year-and-a-half it's been carrying these items and has lived mostly in the center console of my truck.

Is that a steel tube with screw cap?
Could you please tell me where you got it, or how it is called?Tomcat is correct, the small tube in the front right pocket is a Tec Accessories Pico Pen.
-
Oh, ok. Thanks!

-
Ok so the LM Bit Card will fit in the outside pocket of a L Shield like the pocket was made for it. Pretty sure it was btw.
It will also fit in the main pouch with the Wave.
There is no way to fit both of them though. They will both fit but the flap will not reach to snap close and it is way to tight even if it did for my tastes.
Pictures.
Can I ask you what flashlight you have in there?
Sorry, been away for a while.
The flashlight is a Lumintop ToolVN. A modded flashlight pushing 600 Lumens or so.
-
Welcome back Harley !

-
Ok so the LM Bit Card will fit in the outside pocket of a L Shield like the pocket was made for it. Pretty sure it was btw.
It will also fit in the main pouch with the Wave.
There is no way to fit both of them though. They will both fit but the flap will not reach to snap close and it is way to tight even if it did for my tastes.
Pictures.
Can I ask you what flashlight you have in there?
Sorry, been away for a while.
The flashlight is a Lumintop ToolVN. A modded flashlight pushing 600 Lumens or so.
Thanks for the steer, buddy. Welcome back stateside!

-
So I am thinking about picking up a Swisstool X for the better scissors then on my Spirit and for something different.
Which Shield will fit the Swisstool well?
Thanks
-
Good to see you Harley
Merry Christmas 
-
@HarleyXJGuy said:
So I am thinking about picking up a Swisstool X for the better scissors then on my Spirit and for something different.Which Shield will fit the Swisstool well?
Thanks
This is an M Shield and it seems about perfect for this particular loadout.
This is also the smallest Shield that I have.I would also just ask Metro what he suggests too,he has done a lot of these!
Swisstool Spirit X
Leatherman Bit Adapter kit and bits
Streamlight MicroStreamAnd there is an empty front and left side slip you might find something else to cram into?
Overall a nice compact but powerful little package!



Sent from my iPhone using Tapatalk
-
So I am thinking about picking up a Swisstool X for the better scissors then on my Spirit and for something different.
Which Shield will fit the Swisstool well?
Thanks
This is an M Shield and it seems about perfect for this particular loadout.
This is also the smallest Shield that I have.I would also just ask Metro what he suggests too,he has done a lot of these!
Swisstool Spirit X
Leatherman Bit Adapter kit and bits
Streamlight MicroStreamAnd there is an empty front and left side slip you might find something else to cram into?
Overall a nice compact but powerful little package!



Sent from my iPhone using Tapatalk
Thanks a lot for posting this.
Unfortunately I was asking about the larger Swisstool X and not the Spirit.
I also carry a Spirit everyday in a Large Shield.
-
Well let me find the big dog and try again!

Does it not fit in the L Shield?
I do have a 2L Shield but I need to find the tool first,I know I saw it recently somewhere?So I am thinking about picking up a Swisstool X for the better scissors then on my Spirit and for something different.
Which Shield will fit the Swisstool well?
Thanks
This is an M Shield and it seems about perfect for this particular loadout.
This is also the smallest Shield that I have.I would also just ask Metro what he suggests too,he has done a lot of these!
Swisstool Spirit X
Leatherman Bit Adapter kit and bits
Streamlight MicroStreamAnd there is an empty front and left side slip you might find something else to cram into?
Overall a nice compact but powerful little package!



Sent from my iPhone using Tapatalk
Thanks a lot for posting this.
Unfortunately I was asking about the larger Swisstool X and not the Spirit.
I also carry a Spirit everyday in a Large Shield.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






